1. Produk Langkungview
The SuperlightingLED DC12V RGB CCT LED Strip Light is a versatile, non-waterproof flexible LED tape light designed for various indoor lighting applications. It features a dual-row design with SMD 5050 LEDs for RGB colors and SMD 2835 LEDs for adjustable warm white (2700K) to daylight white (6000K) illumination. With a high CRI 90+, it ensures accurate color rendering.
Fitur konci:
- RGBCCT Full Color + High CRI 90+: Offers vibrant RGB lighting and tunable white light from 2700K to 6000K with excellent color accuracy.
- Dual Row Design, 15mm Wide: High-density configuration with 1350 LEDs per roll for superior brightness, delivering up to 24,300 lumens.
- 12V DC Powered, Cuttable & Extendable: Operates safely on 12V DC. Each 5-meter (16.4ft) roll can be cut every 9 LEDs for custom lengths.
- Flexible with Strong Adhesive Backing: Easy installation on various surfaces due to its flexibility and durable adhesive.
- Aplikasi serbaguna: Suitable for workbenches, retail displays, signage backlighting, videography, cabinet lighting, under-cabinet lighting, showcases, and trade show displays.
Eusi pakét:
- 1 x 16.4FT LED strip light
Catetan: This package includes only the LED strip light. A compatible 12V DC power supply and an RGBCCT controller are required for operation and must be purchased separately.
2. Émbaran Kasalametan
- Pamakéan jero rohangan wungkul: This LED strip light is non-waterproof (IP20 rated) and designed exclusively for indoor applications. Do not expose to moisture, water, or outdoor elements.
- Sasayogian tanaga: Use only a compatible 12V DC power supply. Connecting to an incorrect voltage tiasa ngaruksak strip sareng nimbulkeun résiko kaamanan.
- Sambungan listrik: All electrical connections should be performed by a qualified individual if you are unsure. Ensure power is disconnected before making any connections or modifications.
- motong: Only cut the LED strip at designated cut marks (every 9 LEDs). Cutting elsewhere will damage the circuit and render that section unusable.
- Panas: While LED strips generate minimal heat, ensure adequate ventilation, especially when installed in enclosed spaces. Do not cover the strip with materials that could trap heat.
- Permukaan dipasang: Ensure the mounting surface is clean, dry, and free of dust or grease for optimal adhesive performance.
3. Spésifikasi produk
| Fitur | Rincian |
|---|---|
| Tipe Jalur LED | SMD 5050 RGB + SMD 2835 Warm White + SMD 2835 Daylight White |
| Suhu Gawé | -4°F (-20°C) ~ 122°F (50°C) |
| Warna Cahaya | RGB + Warm White + Daylight White |
| Diménsi | 16.4Ft (5m) / roll |
| Cuttable Unit | Every 9 LEDs (12V) |
| Kuantitas LED | 1350 LEDs / roll |
| Jangka waktu hirup | 50,000+ jam |
| Strip Dimensions (L x W x H) | 5000cm (197 in) x 1.5cm (0.59 in) x 0.25cm (0.1 in) |
| Masukan Voltage | 12V DC |
| Working Power (Max) | 150W / 16.4ft (9.15W / foot) |
| Lamp Fluks Luminous | 18-20 Lumens / LED, 1,500 Lm / Ft, 24,300 Lumens / 16.4ft |
| Color Temperature CCT (White) | Warm White (2700K) to Daylight White (6000K) |
| Pola Beam | 120 derajat |
| Peunteun waterproof | Non-waterproof IP20 |
| CRI (Ra>) | 90+ |
| Lebar PCB | 15mm (0.59 inci) |
| Item Beurat | 6.4 ons |
| Métode kontrol | App, Voice (with compatible controller) |
4. Parentah Setup
4.1 Components Required (Sold Separately):
- 12V DC Power Supply: Ensure the power supply has sufficient wattage for the length of the LED strip used.
- RGBCCT LED Controller: A compatible controller (e.g., RF remote or WiFi controller) is necessary to control the color, brightness, and color temperature of the strip.
Example of compatible accessories:
Wiring diagram showing connections to controller and power supply, with exampkirang asesoris anu cocog.
4.2 Pra-Pasang:
- Tata Letak: Determine the desired path for your LED strip. Measure the length required.
- Permukaan bersih: Ensure the mounting surface is clean, dry, smooth, and free of dust or oil for optimal adhesion.
- Komponen Tés: Before permanent installation, connect the LED strip, controller, and power supply to ensure all components function correctly.
4.3 Léngkah-léngkah Pamasangan:
- Cutting the LED Strip (if necessary):
The LED strip can be cut every 9 LEDs at the designated cut marks. Use sharp scissors to ensure a clean cut.
Illustration of LED strip cut points and dimensions.
Catetan penting: The PCB width is 15mm, and the sleeve width is 17mm. Standard 6-pin quick connectors are not compatible with this width. It is recommended to cut and solder connections for custom lengths.
- Nyambungkeun Strip LED:
Connect the LED strip to the RGBCCT controller. This strip uses a 5-wire connection (DC12V+, Red, Green, Blue, Warm White, Daylight White). Ensure correct polarity and wire assignment.
Detailed wiring diagram for the RGBCCT LED strip.
- Nyambungkeun catu daya:
Connect the RGBCCT controller to the 12V DC power supply. Refer to the controller's manual for specific wiring instructions. - Mounting the LED Strip:
Peel off the protective backing from the strong blue adhesive on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm and even contact along its entire length.
5. Parentah Operasi
Operation of the SuperlightingLED RGB CCT LED Strip Light requires a compatible RGBCCT controller (purchased separately). The specific functions and controls will depend on the model of controller you are using. Refer to your controller's instruction manual for detailed operating procedures.
General Operation (via compatible controller):
- Hurungkeun/Pareuman: Use the designated power button on your controller or app.
- Pilihan Warna: Select from 16 million RGB colors using the color wheel or preset buttons on your controller/app.
RGB color display capabilities.
- Pangaluyuan Lampu Bodas: Adjust the white light color temperature from warm white (2700K) to daylight white (6000K).
Adjustable white light color temperatures.
- Kontrol kacaangan: Dim or brighten the light output to your desired level.
- Modes/Scenes: Many controllers offer pre-programmed dynamic modes or the ability to create custom scenes.
- App/Voice Control: If using a WiFi controller, you may be able to control the strip via a smartphone app or voice assistants.
Example of indoor application and app control.
6. Pangropéa
- beberesih: Ensure the LED strip is powered off and cool before cleaning. Gently wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or excessive moisture.
- Pamariksaan: Periodically inspect the strip for any signs of damage, loose connections, or adhesive degradation.
- Panyimpenan: If storing the LED strip, ensure it is rolled neatly and kept in a dry, cool environment away from direct sunlight and extreme temperatures.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Strip LED teu hurung. | No power to the strip/controller. Kabel salah. Catu daya atanapi kontroler anu rusak. | Pariksa naha catu daya parantos dicolokkeun sareng nampi daya. Verify all wiring connections between the strip, controller, and power supply are correct and secure. Test the power supply and controller with another compatible device if possible. |
| Incorrect colors or white light. | Incorrect wiring to the controller. Controller settings are wrong. | Ensure the R, G, B, WW, DW, and 12V+ wires are connected to the correct terminals on the controller. Refer to your controller's manual to ensure it is set to the correct output mode for RGBCCT strips. |
| Bagian stripna teu hurung. | Damage to the strip. Incorrect cut. | Inspect the non-working section for physical damage. If a section was cut incorrectly (not at the designated marks), it may be permanently damaged. |
| Perekatna teu nahan. | Surface not properly cleaned. Beungeutna keropos atanapi henteu rata. | Ensure the surface is thoroughly cleaned and dry before application. For porous or uneven surfaces, consider using additional mounting clips or stronger adhesive. |
8. Garansi jeung Rojongan
8.1 Émbaran Garansi:
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty duration and terms, please refer to the documentation provided with your purchase or contact the seller directly.
8.2 Rojongan Palanggan:
If you encounter any issues or have questions not covered in this manual, please contact the seller or manufacturer for assistance. When contacting support, please have your product model number (FLSDR-RGBCCT-1350) and purchase information readily available.
