Edision HDMI Modulator Xtend Lite

1. Produk Langkungview

The Edision HDMI Modulator Xtend Lite is a versatile single-channel HDMI to DVB-T MPEG4 Full High Definition modulator. It is designed to convert HDMI signals from various sources into a digital terrestrial DVB-T MPEG4 signal, allowing distribution over coaxial cable to multiple televisions. Its compact design and intuitive controls make it suitable for both horizontal and vertical installations.

Key features include an integrated HDMI-loop output for local monitoring, a USB port for quick configuration data transfer, and a FAST PRE-CONFIG function with 50 selectable IDs for easy setup in multi-unit installations. It supports IR control over coaxial cable with an optional accessory.

2. Eusi Paket

Punten parios yén sadaya barang anu didaptarkeun di handap kalebet kana pakét anjeun:

• Edision HDMI Xtend Modulator
• IR Tx cable jack
• Universal 5V / 2.0A EU / UK Power Supply Unit
• Pituduh Pamaké (manual ieu)

Image: Contents of the Edision HDMI Modulator Xtend Lite package, showing the modulator unit, IR Tx cable, and power adapter.

Image: The retail packaging for the Edision HDMI Modulator Xtend Lite, highlighting its features and contents.

3. Fitur Produk

• HDMI-loop output for connecting to a local TV and vieweusi.
• Optional IR CONTROL over COAX system (EDI-Rx) can be connected.
• Terrestrial digital signal RF mixing input.
• Input Signal: HDMI.
• Output Signal: up to FULL HIGH DEFINITION (1080i, up to 1080p @ 30FPS), terrestrial digital DVB-T signal, MPEG4.
• Aspect Ratio support: 16:9 wide screen, 4:3 letter box, 4:3 pan scan.
• Power source: Corded Electric.

4. Panel hareup Leuwihview

Image: Front panel of the Edision HDMI Modulator Xtend Lite, showing buttons, LED display, and dimensions.

1. Tombol konci: Used to lock/unlock the front panel controls.
2. Tombol Menu/OK: Accesses the menu and confirms selections.
3. Tombol Kénca/Katuhu: Navigates ngaliwatan pilihan ménu.
4. Tombol Naék / Turun: Navigates ngaliwatan pilihan ménu.
5. tampilan LED: Shows the RF channel name and menu information.
6. Power identification LED: Nunjukkeun status kakuatan.
7. Display lock identification LED: Indicates if the display is locked.
8. HDMI output & input signal identification LED: Indicates HDMI signal presence.

5. Sambungan Leuwihview

Image: Rear panel of the Edision HDMI Modulator Xtend Lite, showing all input and output ports.

1. RF IN: RF LOOP input (50-2400 MHz).
2. RF kaluar: RF output Signal (Terrestrial DVB-T).
3. IR OUT: Infrared connection with the Jack to IR Tx cable.
4. port USB: For CONFIG DATA function (USB 2.0 HOST, Fat32 support).
5. HD IN: input HDMI.
6. HD OUT: HDMI output (HDMI-loop).
7. Ground point: For grounding the unit.
8. DC 12V/2A: Connection for external power supply.

6. Setélan

Follow these steps to set up your Edision HDMI Modulator Xtend Lite:

1. Sambungkeun Kakuatan: Connect the provided 5V/2.0A power adapter to the DC 12V/2A port (8) on the rear panel and plug it into a power outlet. The Power identification LED (6) on the front panel should illuminate.
2. Sambungkeun Sumber HDMI: Connect your HDMI source (e.g., satellite receiver, camera, DVD player) to the HD IN port (5) using an HDMI cable.
3. Sambungkeun Kaluaran RF: Connect the RF OUT port (2) to your TV's antenna input or to your home's coaxial distribution system.
4. Local TV Connection (Optional): Upami anjeun hoyong view the content on a local TV, connect the HD OUT port (6) to an HDMI input on your local TV.
5. IR Control (Optional): If using the IR CONTROL over COAX system, connect the IR Tx cable jack to the IR OUT port (3).
6. RF Input (Optional): If you have an existing terrestrial digital signal you wish to mix, connect it to the RF IN port (1).

7. Parentah Operasi

Once connected, the modulator will begin processing the HDMI input. Use the front panel buttons to navigate and configure settings.

• Konfigurasi Saluran: Press the MENU/OK button (2) to access the main menu. Use the Left/Right (3) and Up/Down (4) buttons to navigate through options such as output channel, frequency, and modulation parameters. Press MENU/OK to confirm selections.
• FAST PRE-CONFIG: The device comes with 50 pre-configured IDs. This feature allows for quick setup, especially when multiple modulators are used in the same installation. Refer to the on-screen menu for selecting these IDs.
• CONFIG DATA Function: For advanced configuration or to load specific settings, use the USB port (4). You can extract configuration data to a USB drive or upload new settings from a USB drive to the modulator. This function supports Fat32 formatted USB drives.
• Konci Panel hareup: Use the Lock button (1) to prevent accidental changes to settings. The Display lock identification LED (7) will indicate the lock status.

8. Aplikasi Example

The diagram below illustrates a typical application scenario for the Edision HDMI Modulator Xtend Lite, demonstrating how it can distribute an HDMI source to multiple TVs via a DVB-T coaxial network.

Image: Application example showing the modulator connecting an HDMI source (STB, PC, CCTV, TV Box) to a main TV via HDMI loop and distributing the signal to multiple TVs (TV1, TV2, TV3, TV4) via DVB-T coaxial cable, potentially mixing with an existing RF signal.

In this setup, an HDMI source (such as a Set-Top Box, PC, CCTV system, or TV Box) is connected to the modulator's HDMI input. The modulator then outputs the signal as a DVB-T channel via the RF OUT port, which can be connected to a coaxial distribution network to feed multiple televisions. An existing terrestrial RF signal can also be fed into the RF IN port to be mixed with the modulated HDMI signal. The HDMI LOOP OUT allows for local monitoring on a main TV.

9. Cara ngungkulan

• Henteu aya sinyal dina TV:
  • Ensure the modulator is powered on and the Power LED is lit.
  • Verify the HDMI source is active and connected correctly to the HD IN port.
  • Check the coaxial cable connection from RF OUT to your TV/distribution system.
  • Perform a channel scan on your TV to find the new DVB-T channel.
  • Ensure the output channel frequency on the modulator does not conflict with existing channels in your area.
• Kualitas Gambar/Sora Goréng:
  • Check the quality of the HDMI input signal.
  • Adjust the RF output level in the modulator's settings.
  • Ensure proper impedance matching in your coaxial network.
  • For advanced users, verify FEC (Forward Error Correction) and GI (Guard Interval) settings, which might require using the CONFIG DATA function via USB for precise adjustments.
• Front Panel Buttons Unresponsive:
  • Check if the Lock button (1) is engaged. Press it to unlock the controls.
• Kontrol IR Henteu Jalan:
  • Ensure the IR Tx cable is securely connected to the IR OUT port (3).
  • Verify the optional IR CONTROL over COAX system (EDI-Rx/Tx) is correctly installed and configured.

10. Spésifikasi

11. Garansi jeung Rojongan

This Edision HDMI Modulator Xtend Lite comes with a two (2) year warranty ti tanggal beuli. Punten tahan bukti pameseran anjeun pikeun klaim garansi.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your local Edision dealer or visit the official Edision websitus pikeun inpo kontak.