1. Bubuka
The TRENDnet TC-NTP1 Inline PoE Tester is a compact tool designed for network professionals. It provides accurate testing for various Power over Ethernet (PoE) technologies, including 4PPoE, PoE+, PoE, and passive PoE. This device operates inline between a PoE source (PSE) and a PoE device (PD), offering real-time data on wattage, jilidtage, jeung amperage. It is compatible with IEEE 802.3af/at/bt PoE devices up to 100W and non-standard passive PoE devices ranging from 11V to 60V.
2. Fitur konci
- PoE Technology Support: Tests 4PPoE, PoE+, PoE, and passive PoE.
- Pangimeutan sacara real-time: Némbongkeun wattage, jilidtage, jeung amperage of the connected PoE device.
- Multiple Testing Modes: Includes T-mode for PSE device testing, N-mode for non-standard passive PoE, and I-mode for inline PoE testing.
- Operasi ramah-pamaké: Battery-free design for immediate use.
- Kasaluyuan: Supports IEEE 802.3af/at/bt PoE devices up to 100W and passive PoE from 11V – 60V.
- Step Button Functionality: Allows cycling through and locking display readouts for voltage, amperage, jeung wattage.
- Port Gigabit: Equipped with one Gigabit port for PSE connection and one Gigabit port for PoE device connection.
- NDAA Compliant: Suitable for government networking solutions (U.S. and Canada Only).
3. Eusi Paket
- TRENDnet TC-NTP1 Inline PoE Tester
- Guide Instalasi Gancang
4. Produk Langkungview
Gambar 4.1: Angled view of the TRENDnet TC-NTP1 Inline PoE Tester, showing the display and ports.
Gambar 4.2: Top view of the TC-NTP1, highlighting the LED display for Mode A (End-span) and Mode B (Mid-span) and the 'STEP' button.
Gambar 4.3: Hareupeun view of the TC-NTP1, showing the PSE (Power Sourcing Equipment) Gigabit Ethernet port.
Gambar 4.4: Handap view of the TC-NTP1, showing the product information label.
5. Setélan
- Ensure the TC-NTP1 is free from any physical damage.
- The device is battery-free and ready for use upon connection. No external power source is required for its operation.
- Identify the Power Sourcing Equipment (PSE) and the Powered Device (PD) in your network setup.
6. Parentah Operasi
6.1. Nyambungkeun Tester
- Connect the Ethernet cable from your PoE source (e.g., PoE switch or injector) to the PSE port on the TC-NTP1.
- Sambungkeun kabel Ethernet tina PD port on the TC-NTP1 to your PoE device (e.g., IP camera, access point).
- The TC-NTP1 will automatically power on and begin displaying information.
6.2. Testing Modes
The TC-NTP1 offers three distinct testing functions:
- T-mode (PSE Device Testing): This mode is used to determine the PoE type and voltage output of your Power Sourcing Equipment (PSE), such as a PoE switch or injector. Connect the PSE directly to the tester's PSE port.
- N-mode (Non-Standard Passive PoE Devices): Designed for testing non-standard passive PoE devices. This mode supports devices with voltage dibasajankeun 11V ka 60V.
- I-mode (PoE Inline Testing): For real-time monitoring, connect the tester inline between the PSE and the Powered Device (PD). This mode displays the voltage, amperage, jeung wattage being delivered to the connected PD.
6.3. Using the Step Button
The LENGKAH button on the TC-NTP1 allows you to cycle through the displayed readouts (voltage, amperage, jeung wattage). Pressing the button repeatedly will switch between these values. You can also press and hold the button to lock the display on a specific readout for continuous monitoring.
7. Spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | TC-NTP1 |
| merek | TRENDnet |
| Standar PoE | IEEE 802.3af, 802.3at, 802.3bt |
| Supported PoE Types | 4PPoE, PoE+, PoE, Passive PoE |
| Kaluaran Daya Max | Nepi ka 100W |
| Pasip PoE Voltage Rentang | 11V - 60V |
| Palabuhan | 1 x Gigabit PSE, 1 x Gigabit PD |
| tampilan | LED (Wattage, Voltage, Amperage, Polarity) |
| Sumber Daya | Battery-Free (Powered by PoE) |
| Ukuran (L x W x H) | 3.9 x 1.4 x 1 inci (99 x 36 x 25 mm) |
| Beurat | 2.82 ons (0.08 kg) |
| Suhu Operasi | 32°F nepi ka 122°F (0°C nepi ka 50°C) |
| Sertifikasi | CE, FCC |
8. Cara ngungkulan
- Henteu aya tampilan/kakuatan: Ensure the PoE source is active and providing power. The TC-NTP1 is battery-free and draws power from the PoE connection. Verify the Ethernet cables are properly connected and functional.
- Bacaan anu salah: Double-check that the cables are securely connected to the correct PSE and PD ports. Ensure the PoE source and device are compatible with the tester's supported standards.
- Device Not Powering On (PD): If the PoE device connected to the PD port is not powering on, use T-mode to test the PSE directly to confirm it is supplying power correctly. Then, use I-mode to check the inline power delivery.
- Polarity Issues: The tester indicates polarity. If a "REV" (Reverse Polarity) LED illuminates, there may be an issue with the PoE source or cabling.
9. Pangropéa
- beberesih: Anggo lawon anu lemes sareng garing pikeun ngabersihkeun alat. Entong nganggo pembersih cair atanapi aerosol.
- Panyimpenan: Simpen alat dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
- Penanganan: Handle the device with care to prevent physical damage to the ports or internal components.
10. Garansi jeung Rojongan
The TRENDnet TC-NTP1 Inline PoE Tester is backed by a 2-year TRENDnet Manufacturer Protection from the date of purchase. For technical assistance or warranty claims, please contact TRENDnet's customer support.
TRENDnet provides reliable technical support with English-speaking advisors and experts available during normal business hours. For support, visit the official TRENDnet website or refer to the contact information provided in the Quick Installation Guide.
Kanggo inpo nu leuwih lengkep, buka di Toko TRENDnet di Amazon.
