Buku Panduan Pangguna Kaméra Mikro iBeam Hideung Sudut Tetep

1. Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Émbaran Kasalametan

• Sok pegatkeun sambungan batré kendaraan sateuacan ngamimitian pamasangan listrik.
• Ensure all wiring is properly insulated and secured to prevent short circuits or damage.
• Ulah ngahalangan supir urang view or interfere with vehicle controls during installation.
• Taroskeun ka pamasangan profésional upami anjeun henteu yakin ngeunaan bagian mana waé tina prosés pamasangan.
• This product is intended as an aid and should not replace safe driving practices.

3. Eusi Paket

Pastikeun yén sadaya item aya dina bungkusan:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Diiringkeun kabel
• Manual Pitunjuk (dokumén ieu)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Produk Langkungview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Gambar: A close-up view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Fitur konci:

• Desain kompak: Small footprint for discreet installation.
• Tahan cai: IP68 rated for reliable performance in various weather conditions.
• Sénsor Gambar: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view atawa hareup view).
• Pamasangan: Features an 8MM threaded bolt for secure mounting.

5. Setup jeung Instalasi

Follow these steps for proper installation of your iBeam Micro Camera:

1. Pilih Lokasi Pasang: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Nyiapkeun Permukaan Pemasangan: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Pasang kaméra: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Sambungan Wiring:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Fungsi Uji: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Wiring Aman: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Parentah Operasi

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Oriéntasi Gambar: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Pangropéa

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• beberesih: Périodik ngabersihan lénsa kaméra ku lemes, damp lawon pikeun ngaleungitkeun kokotor, lebu, atanapi bintik cai anu tiasa ngahalangan view. Do not use abrasive cleaners.
• Pamariksaan: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Ulah ngumbah nganggo tekanan tinggi: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Cara ngungkulan

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Pabrikan: Metra Electronics Corp