1. Bubuka
This manual provides essential information for the proper installation, operation, and maintenance of the TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor. This inductive sensor is designed for non-contact detection of metallic objects.
Mangga baca heula buku panduan ieu kalawan saksama sateuacan nganggo produk ieu pikeun mastikeun operasi anu aman sareng efisien.
2. Émbaran Kasalametan
WARNING: Failure to follow these safety instructions may result in personal injury or equipment damage.
- Pastikeun daya dicabut sateuacan dipasang, dipasang kabel, atanapi diropéa.
- Only qualified personnel should install and service this device.
- Entong ngalangkungan vol anu ditetepkeuntage jeung ratings ayeuna.
- Protect the sensor from mechanical impact and excessive vibration.
- Do not modify the sensor. Unauthorized modifications may void the warranty and compromise safety.
3. Produk Langkungview
The TURCK NI3-EG08K-AP6X-V1131 is an inductive proximity sensor with the following key features:
- model: NI3-EG08K-AP6X-V1131
- Range Sensing: 3 mm
- Perumahan: M8x1 Barrel, 8mm stainless steel full threading short barrel
- Jenis Kaluaran: Normally Open (NO) PNP
- Operasi Voltage: 10-30 VDC
- Sambungan: M8 Male Connector (Picofast 3-Pin QD Connector)
- Indikator: 1 LED for operational status
This sensor is designed for reliable detection of metallic targets in industrial environments.
4. Setup jeung Instalasi
4.1 Pamasangan
- Select a mounting location where the sensor is protected from physical damage and excessive heat.
- Mount the M8x1 barrel sensor using appropriate mounting hardware, ensuring it is securely fastened.
- Maintain adequate clearance around the sensor head to prevent interference from surrounding metallic objects, especially for flush-mountable sensors. Refer to the sensor's datasheet for specific mounting distances.
4.2 Kabel
The sensor features a 3-pin M8 male connector. Follow the standard wiring color code for PNP sensors:
- Pin 1 (Brown): +VDC (10-30VDC)
- Pin 3 (Blue): 0VDC (Ground)
- Pin 4 (Black): Output (PNP, Normally Open)
Connect the sensor to the control system according to the wiring diagram provided by the system manufacturer. Ensure all connections are secure and properly insulated.
5. Operasi
Once properly installed and wired, apply power to the sensor. The integrated LED indicator will provide status feedback:
- LED ON: Indicates that a metallic object is within the sensing range and the output is active (PNP output is high).
- LED pareum: Indicates no metallic object is detected within the sensing range and the output is inactive (PNP output is low).
The sensor operates by generating an electromagnetic field. When a metallic object enters this field, it causes a change in oscillation, triggering the output. The 3mm sensing range ensures reliable detection for small to medium-sized metallic targets.
6. Pangropéa
The TURCK NI3-EG08K-AP6X-V1131 sensor is designed for minimal maintenance. However, regular inspection can prolong its lifespan and ensure reliable operation.
- beberesih: Periodically clean the sensor face to remove dust, dirt, or debris that may accumulate and affect sensing performance. Use a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Pamariksaan: Check wiring and connections for any signs of damage, corrosion, or loose contacts. Ensure the sensor is securely mounted and not subjected to excessive vibration.
- Kaayaan Lingkungan: Pastikeun lingkungan operasi tetep dina kisaran suhu sareng kalembaban anu ditangtukeun.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Sensor not detecting objects / LED always OFF |
|
|
| Sensor always ON / LED always ON |
|
|
| Deteksi intermiten |
|
|
8. Spésifikasi
| Parameter | Nilai |
|---|---|
| Nomer modél | NI3-EG08K-AP6X-V1131 |
| Produsén | Turck |
| Range Sensing | 3 mm |
| Tipe Perumahan | M8x1 Barrel, 8mm stainless steel full threading short barrel |
| Tipe Kaluaran | PNP, Biasana Buka (NO) |
| Operasi Voltage | 10-30 VDC |
| Sambungan | M8 Male Connector (Picofast 3-Pin QD) |
| Indikator | 1 LED |
| ASIN | B0898TS8W2 |
| Tanggal Kahiji Sadia | 27 Méi 2020 |
9. Garansi jeung Rojongan
For specific warranty information, please refer to the documentation provided with your purchase or contact Turck customer support directly. General warranty terms typically cover defects in materials and workmanship for a specified period from the date of purchase.
For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Turck customer service or your authorized distributor. Have your model number (NI3-EG08K-AP6X-V1131) ready when contacting support.
Turck Official Websitus: www.turck.com
