DeWalt DXPMRCH6-800 6-Port Charger Instruction Manual

1. Bubuka

The DeWalt DXPMRCH6-800 is a robust 6-port charging station designed for efficient and simultaneous charging of up to six compatible DeWalt DXPMR800 or DXPMR300 two-way radios. This manual provides essential information for the safe and effective use of your charger.

Naon anu aya dina Kotak:

• 1 x DeWalt DXPMRCH6-800 6-Port Charger Unit
• 1 x Power Adapter with 1.8m Cable

2. Émbaran Kasalametan

Mangga baca jeung ngarti sagala parentah kaamanan saméméh ngagunakeun carjer. Gagalna nuturkeun parentah ieu bisa ngakibatkeun shock listrik, seuneu, atawa tatu serius.

• Sumber Daya: Use only the provided power adapter. Ensure the power outlet voltage cocog sareng spésifikasi adaptor.
• Lingkungan: Do not expose the charger to water, rain, or excessive moisture. This product is not waterproof. Operate in a dry, indoor environment.
• Ventilasi: Ensure adequate ventilation around the charger. Do not cover the charger or block any ventilation openings.
• Kasaluyuan: This charger is designed exclusively for DeWalt DXPMR800 and DXPMR300 two-way radios. Do not attempt to charge other devices.
• Ruksakna: Do not use the charger if the power cord, adapter, or charger unit is damaged. Contact customer support for assistance.
• Pembongkaran: Do not attempt to disassemble, modify, or repair the charger. This will void the warranty and may cause harm.
• Barudak: Jauhkeun carjer tina jangkauan barudak.

3. Setélan

Follow these steps to set up your DeWalt 6-Port Charger:

1. Ngabongkar: Sacara saksama miceun sadaya komponén tina bungkusan.
2. panempatan: Place the charger on a stable, flat, and dry surface, away from direct sunlight or heat sources. The 1.8-meter power cable allows for flexible placement.
3. Sambungkeun Kakuatan: Insert the power adapter cable into the DC input port on the back of the charger. Plug the other end of the power adapter into a standard electrical outlet.
4. Daya Hurung: The charger is now ready for use. There is no separate power switch; it powers on automatically when connected to an outlet.

4. Parentah Operasi

Charging your DeWalt two-way radios is a straightforward process:

1. Insert Radios: Gently slide a compatible DeWalt DXPMR800 or DXPMR300 two-way radio into an available charging slot on the charger. Ensure the radio is seated firmly and correctly.
2. Monitor ngecas: Each charging port features an individual LED indicator.
• Padet Beureum LED: Indicates the radio is currently charging.
• LED héjo padet: Indicates the radio's battery is fully charged.
• Kedip-kedip LED Beureum: May indicate a charging error or an incompatible battery/radio. Refer to the Troubleshooting section.
3. Waktu Ngecas: The charger is designed for fast charging, capable of fully charging up to six units in approximately 5 hours. Actual charging time may vary based on battery level and condition.
4. Remove Radios: Once the LED indicator turns solid green, the radio is fully charged and can be removed from the charging slot.

5. Pangropéa

Pangropéa anu leres mastikeun umur panjang sareng kinerja optimal carjer anjeun.

• beberesih: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners, solvents, or abrasive materials.
• Panyimpenan: Upami teu dianggo, simpen carjer di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Pamariksaan: Periodically inspect the power cord and charger unit for any signs of damage. If damage is found, discontinue use and contact customer support.

6. Cara ngungkulan

Upami anjeun mendakan masalah sareng carjer anjeun, tingal masalah sareng solusi umum ieu:

• No LED Indicator / Charger Not Powering On:
  • Ensure the power adapter is securely plugged into both the charger and a working electrical outlet.
  • Test the electrical outlet with another device to confirm it has power.
  • Check the power adapter cable for any visible damage.
• Radio Not Charging (Solid Red LED Not Appearing):
  • Ensure the radio is correctly seated in the charging slot and making proper contact with the charging terminals.
  • Verify that the radio's battery is properly installed and not fully discharged to a point where it cannot initiate charging.
  • Try a different charging slot to rule out an issue with a specific port.
• Kedip-kedip LED Beureum:
  • This typically indicates a charging error. Remove the radio, wait a few moments, and reinsert it.
  • Ensure the radio and its battery are compatible with the charger.
  • If the issue persists, the radio's battery may be faulty or at the end of its lifespan.

If these steps do not resolve the issue, please contact DeWalt customer support.

7. Spésifikasi

8. Garansi jeung Rojongan

Garansi Saumur Hirup Wates:

The DeWalt DXPMRCH6-800 6-Port Charger comes with a limited lifetime warranty. This warranty covers defects in materials and workmanship under normal use. Please refer to the official DeWalt warranty policy for full terms and conditions.

Rojongan Palanggan:

For technical assistance, warranty claims, or further information, please visit the official DeWalt website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty services.