1. Bubuka
This manual provides essential information for the safe and effective use of the TURCK WKB 3T-4 Cable Assembly. This product is a high-quality industrial cable designed for reliable electrical connections in various applications. Please read this manual thoroughly before installation and operation.
Figure 1: TURCK WKB 3T-4 Cable Assembly featuring a right-angle 1/2-20UNF female connector. The cable is yellow and the connector housing is metallic.
2. Émbaran Kasalametan
Always observe the following safety precautions to prevent injury or damage to the product and connected equipment:
- Pegatkeun Daya: Ensure all power to the system is disconnected before installing, removing, or performing any maintenance on the cable assembly.
- Penanganan anu leres: Do not bend, twist, or pull the cable excessively. Avoid sharp edges or abrasive surfaces that could damage the cable jacket.
- Kaayaan Lingkungan: Use the cable within its specified voltage, current, and temperature ratings. While rated for indoor/outdoor use, protect connections from direct water ingress unless specifically designed for submersible applications.
- Personil anu mumpuni: Installation and maintenance should only be performed by qualified personnel familiar with electrical systems and safety procedures.
- Pariksa sateuacan dianggo: Before each use, visually inspect the cable and connector for any signs of damage, wear, or corrosion. Do not use if damage is observed.
3. Produk Langkungview jeung Komponén
The TURCK WKB 3T-4 Cable Assembly is designed for robust industrial connectivity. Key features include:
- Tipe Panyambung: Right Angle 1/2-20UNF Female Connector.
- Konfigurasi Kawat: 3-wire cable.
- Panjang kabel: 4 meters (4M).
- Peunteun listrik: 4 Amperes (4A), 250 Volts (250V).
- Cable Jacket: AWM PVC (Appliance Wiring Material, Polyvinyl Chloride) for durability and flexibility.
- warna: Black cable jacket.
- Pamakéan: Cocog jeung duanana aplikasi indoor jeung outdoor.
4. Setup jeung Instalasi
Follow these steps for proper installation of the cable assembly:
- Persiapan: Ensure the mating male connector on your device or system is clean and free of debris. Verify that the system is powered off and de-energized.
- Alignment: Carefully align the right-angle female connector of the WKB 3T-4 cable assembly with the corresponding male connector.
- Sambungan: Gently push the connector together until it seats firmly. The right-angle design allows for connections in confined spaces.
- Sambungan Aman: Rotate the threaded coupling nut on the female connector clockwise until it is hand-tight. Do not overtighten, but ensure a secure connection to prevent accidental disconnection or ingress of contaminants.
- Routing kabel: Route the cable in a manner that avoids sharp bends, kinks, or areas where it could be pinched, cut, or exposed to excessive heat or abrasion. Use cable ties or clamps if necessary to secure the cable path.
- Verifikasi: After installation, visually inspect the connection to ensure it is fully seated and secured.
5. Parentah Operasi
The TURCK WKB 3T-4 Cable Assembly functions as a passive electrical conduit, transmitting power and/or signals between connected devices. Once properly installed, its operation is dependent on the connected equipment.
- Ensure the cable is not subjected to stresses beyond its design limits (e.g., excessive pulling force, sharp impacts).
- Verify that the connected devices are operating within the cable's specified voltage and current ratings (4A, 250V).
- The right-angle design is particularly useful for applications where space is limited or where the cable needs to run parallel to a surface immediately after the connection point.
6. Pangropéa
Regular maintenance helps ensure the longevity and reliable performance of your cable assembly:
- beberesih: Periodically clean the exterior of the cable and connector with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring the connector pins are dry before re-connecting.
- Pamariksaan: Regularly inspect the cable jacket for cracks, cuts, abrasions, or discoloration. Check the connector for bent pins, corrosion, or loose components.
- Integritas sambungan: Periodically check the tightness of the connector's coupling nut to ensure it remains secure.
- Panyimpenan: When not in use, store the cable in a clean, dry environment, away from extreme temperatures and direct sunlight. Avoid coiling the cable too tightly.
7. Cara ngungkulan
This section addresses common issues you might encounter with the cable assembly.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| No power/signal transmission | Sambungan leupas Kabel/konektor anu ruksak Incorrect wiring (external to cable) | Ensure connector is fully seated and coupling nut is tight. Inspect cable for visible damage; replace if damaged. Verify wiring of connected devices. |
| sambungan intermittent | Sambungan leupas Corrosion on pins Karusakan kabel internal | Tighten coupling nut. Clean connector pins carefully (with power off). Replace cable if internal damage is suspected. |
| Connector difficult to mate | Kasalahan Uing dina panyambungna Bent pins | Ensure correct orientation and alignment. Clean connector thoroughly. Inspect for bent pins; if found, cable may need replacement. |
8. Spésifikasi
Detailed technical specifications for the TURCK WKB 3T-4 Cable Assembly:
| Atribut | Nilai |
|---|---|
| Nomer modél | WKB 3T-4 |
| merek | TURCK |
| Tipe Panyambung | Right Angle 1/2-20UNF Female |
| Konfigurasi Kawat | 3 Kawat |
| Panjang kabel | 4 Meters (4M) |
| Peunteun ayeuna | 4 Amperes (4A) |
| Voltage Peunteun | 250 Volts (250V) |
| Bahan Jaket Kabel | AWM PVC |
| Warna | Hideung |
| Pamakéan jero rohangan / outdoor | Jero rohangan, Luar |
| Wangun | Buleud |
| Tanggal Sadia munggaran | 30 April 2020 |
9. Garansi jeung Rojongan
TURCK products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official TURCK websitus atanapi ngahubungan distributor otorisasi Anjeun.
For technical support, product inquiries, or assistance with troubleshooting beyond the scope of this manual, please contact TURCK customer service or your local TURCK representative. Contact information can usually be found on the official TURCK websitus (www.turck.com).
