Bubuka
The Easy One Touch 5 Dash and Windshield Mount is the next generation top car mount in the U.S. Featuring the Patented Easy One Touch Mechanism, you can lock and release smartphones quickly with a one handed motion. Recognized for superior quality and sleek design, the new Easy One Touch 5 series features a new finish that complements modern automotive interiors. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your iOttie car mount.
Image: The iOttie Easy One Touch Signature Dashboard & Windshield Universal Car Mount with a smartphone attached.
Fitur konci
- EASY ONE TOUCH MECHANISM: Press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. The mount’s arms will close automatically, holding your device securely while you drive. Mount or remove your phone in seconds with the patented Easy One Touch Mechanism.
- kasaluyuan lega: New larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size.
- MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located near the bottom foot.
- TELESCOPIC ARM: The improved telescopic arm now extends from 5 inches to 8 inches (as opposed to the Easy One Touch 4 which only extended to 6.5inch) and pivots 260 degrees. This enables a myriad of customized viewing angles while you’re on the road.
- Suku Handap anu Tiasa Diatur: You can easily and securely adjust the bottom foot by squeezing the spring button.
Setup sareng Instalasi
Pilihan Pamasangan
The iOttie Easy One Touch mount offers versatile mounting options for both your dashboard and windshield. Choose the best location for optimal visibility and accessibility.
Pamasangan Kaca Depan
For vehicles with curved or textured dashboards, mounting on the windshield is recommended to ensure a secure suction. Clean the windshield surface thoroughly before application.
Image: The iOttie mount securely attached to a vehicle's windshield, providing a clear view keur supir.
Pamasangan Dashboard
For flat, smooth dashboards, the mount can be directly applied. Ensure the surface is clean and free of debris for maximum adhesion.
Image: The iOttie mount positioned on a vehicle's dashboard, demonstrating its adjustable arm and secure placement.
Suction Cup Preparation
The enhanced suction cup features a sticky gel formula for a stronger hold. For optimal performance, ensure the suction cup is clean. If it loses stickiness, rinse it with warm water and air dry.
Image: Diagram illustrating the enhanced suction cup with its sticky gel formula for improved grip.
Image: A hand rinsing the suction cup under running water, demonstrating the cleaning process to restore stickiness.
Instalasi Video
Video: An official demonstration of how to install the iOttie Easy One Touch Dashboard & Windshield Car Phone Mount, showcasing fitur sarta betah pamakéan na.
Parentah Operasi
Gampang Hiji Toel Mékanisme
To secure your phone, simply press the locking side arms and place your device against the trigger button. The arms will automatically close, holding your phone firmly. To release, squeeze the side arms again.
Image: A diagram illustrating the Easy One Touch Mechanism, showing how to engage and release the phone with a single motion.
Pangaluyuan Panangan Teleskopik
The telescopic arm extends from 5 to 8 inches, allowing you to position your phone at the ideal distance. Loosen the telescopic knob, extend or retract the arm, and then tighten the knob to secure.
Image: Diagram showing the improved telescopic arm and its extension range for customized viewdina sudut.
ViewPangaturan Sudut
The mount pivots 260 degrees, providing a wide range of viewing angles. Adjust the pivot knob to set your preferred angle for navigation or hands-free calls.
Image: A visual representation of the mount's 260-degree pivot capability, allowing for flexible phone positioning.
Magnetic Cord Organizer
Keep your charging cables tidy and out of the way using the integrated magnetic tab located near the bottom foot of the mount.
Gambar: Deukeut view of the magnetic cord organizer tab on the mount, designed to keep charging cables neat.
Pangropéa
Cleaning the Suction Cup
If the suction cup becomes dirty or loses its stickiness, simply rinse it with warm water and allow it to air dry completely. Do not use harsh chemicals or abrasive materials, as this may damage the gel.
Pamérésan masalah
| Masalah | Solusi |
|---|---|
| Mount not sticking to dashboard/windshield. | Ensure surface is clean and dry. Rinse suction cup with warm water and air dry if it has lost stickiness. For textured dashboards, consider windshield mounting. |
| Phone not securely held in cradle. | Ensure the phone is placed firmly against the trigger button to activate the Easy One Touch mechanism. Adjust the bottom foot to properly support the phone. |
| Telescopic arm is loose. | Tighten the telescopic knob to secure the arm in place. |
| Dudukanna murag dina suhu anu ekstrim. | High temperatures can affect suction. Re-apply the mount to a clean surface. Consider mounting on the windshield if dashboard temperatures are too high. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Dimensi produk | 6.5 x 4.2 x 4 inci |
| Item Beurat | 7.2 ons |
| Nomer Modél Item | Dasbor & Kaca Depan |
| Warna | Hideung |
| Produsén | iOttie |
| Alat nu cocog | Smartphones (iPhone, Samsung, LG, Google, OnePlus, etc.) |
| Tipe Pamasangan | Dasbor, Kaca hareup |
| Fitur husus | Adjustable, Telescopic Arm, Magnetic Cord Organizer |
Garansi sareng Rojongan
iOttie products are designed for durability and performance. For specific warranty details and support inquiries, please refer to the official iOttie website or the warranty card included with your purchase. A digital version of the user manual is also available for download:
