Buku Panduan Pangguna Cisco Catalyst 9300 Series Switch

1. Bubuka

This manual provides essential information for the installation, operation, and maintenance of the Cisco Catalyst 9300 Series Switch, model C9300-24T-A. The Catalyst 9300 Series is designed for enterprise-class access, aggregation, and core deployments, offering advanced networking features and performance.

The C9300-24T-A is a 24-port data-only switch, part of the Network Advantage license tier, providing robust and secure network connectivity.

2. Émbaran Kasalametan

Pitunjuk Kasalametan Penting:

• Salawasna turutan kode listrik lokal jeung nasional.
• Pastikeun grounding ditangtoskeun tina alat.
• Do not operate the switch near water or in excessively humid environments.
• Use only the power supply provided or specified by the manufacturer.
• Pegatkeun sambungan kakuatan saméméh meresihan atawa ngalayanan alat.
• produk ieu dimaksudkeun pikeun pamakéan indoor wungkul.

3. Eusi Paket

Pariksa yén pakét anjeun ngandung barang-barang ieu:

• Cisco Catalyst 9300-24T-A Switch
• Kabel listrik
• Pakakas pikeun dipasang dina rak (braket, sekrup)
• Kabel Konsol (RJ-45 ka DB-9)
• Dokuméntasi (Panduan Mimitian Gancang, Inpormasi Kasalametan)

Note: Contents may vary slightly depending on the region and specific bundle.

4. Pedaran Fisik

The Cisco Catalyst C9300-24T-A switch features 24 Gigabit Ethernet network ports and supports stacking capabilities.

Gambar 4.1: Hareupeun view of the Cisco Catalyst C9300-24T-A switch, showing 24 Gigabit Ethernet ports and status indicators.

4.1 Fitur Panel hareup

• 24 x Gigabit Ethernet Network Ports: Port RJ-45 pikeun nyambungkeun alat jaringan.
• Port Uplink: Dedicated ports for connecting to higher-level network devices.
• LED Status: Indicators for system status, port status, and power.

4.2 Fitur Panel Rear

• Panyambung Daya: Pikeun nyambungkeun kabel daya AC.
• Port konsol: RJ-45 port for local management and initial configuration.
• Port USB: For external storage or console access.
• Palabuhan Tumpukan: Ports for connecting multiple switches in a stack.

5. Setup jeung Instalasi

5.1 Persiapan Loka

• Ensure adequate ventilation and airflow around the switch.
• Maintain appropriate operating temperature and humidity.
• Provide a stable, level surface or a standard 19-inch equipment rack.
• Ensure a reliable power source with proper grounding.

5.2 Rak Pamasangan

1. Pasangkeun braket rak anu disayogikeun kana sisi saklar nganggo sekrup anu kalebet.
2. Sejajarkeun saklar sareng tihang rak teras amankeun nganggo sekrup rak anu cocog.
3. Ensure the switch is level and securely fastened.

5.3 Nyambungkeun Daya

1. Sambungkeun kabel kakuatan ka konektor kakuatan AC dina panel pungkur saklar.
2. Colokkeun tungtung kabel listrik anu sanés kana stop kontak listrik anu dibumikeun.
3. The system will power on automatically. Observe the system LED for status.

5.4 Nyambungkeun Kabel Jaringan

• Connect Ethernet cables from your network devices (computers, servers, access points) to the 24 Gigabit Ethernet ports on the front panel.
• For uplink connections to other switches or routers, use the designated uplink ports.
• Ensure cables are securely seated.

5.5 Aksés Konfigurasi Awal

To perform initial configuration, connect a computer to the console port using the provided console cable. Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings:

• Laju Baud: 9600
• Bit Data: 8
• Parity: Euweuh
• Ngeureunkeun Bit: 1
• Kontrol Aliran: Euweuh

Refer to the Cisco IOS XE documentation for detailed configuration procedures.

6. Operasi

6.1 Powering on / Pareum

• Daya Hurung: Connect the power cord to a power source. The switch will automatically power on.
• Pareum listrik: Disconnect the power cord from the electrical outlet. For controlled shutdown, use the appropriate CLI commands before disconnecting power.

6.2 Indikator LED

The front panel LEDs provide visual status of the switch operation:

• Sistim LED: Indicates overall system health (e.g., green for normal, amber for warning, red for critical).
• LED Status Port: Indicate link status and activity for each network port (e.g., green for link, blinking for activity, off for no link).
• Stack LED: Indicates the status of the switch within a stack.

Refer to the Cisco documentation for a complete description of LED behavior.

7. Pangropéa

7.1 beberesih

• Ensure the switch is powered off and disconnected from the power source before cleaning.
• Use a soft, dry cloth to wipe the exterior of the switch.
• Ulah nganggo pembersih cair atanapi aerosol langsung kana saklar.
• Jaga liang ventilasi tetep bersih tina lebu sareng runtah.

7.2 Apdet firmware

Rutin pariksa rojongan Cisco website for the latest firmware (IOS XE) updates. Applying updates can improve performance, add features, and address security vulnerabilities. Follow Cisco's official procedures for firmware upgrades to avoid system disruption.

7.3 Pertimbangan Lingkungan

Maintain the operating environment within specified temperature and humidity ranges to ensure optimal performance and longevity of the switch.

8. Cara ngungkulan

This section provides solutions to common issues. For more complex problems, consult Cisco's official documentation or technical support.

8.1 Reset pabrik

Performing a factory reset will erase all configurations and restore the switch to its default settings. This procedure should only be performed if necessary and with caution. Consult Cisco documentation for the specific CLI commands to perform a factory reset for the Catalyst 9300 series.

9. Spésifikasi

10. Garansi jeung Rojongan

Produk ieu ditawarkeun salaku barang Amazon Renewed. Produk Amazon Renewed dipariksa sacara profésional sareng diuji supados tiasa dianggo sareng katingalina sapertos énggal. Éta layak pikeun digentos atanapi dibalikeun duitna dina Jaminan Amazon Renewed upami anjeun teu sugema kana pameseran anjeun.

For specific warranty details related to the Amazon Renewed program, please refer to the Amazon Renewed Guarantee documentation provided at the time of purchase or on the Amazon websitus.

For technical support related to the Cisco Catalyst 9300 Series Switch's features and configuration, please consult the official Cisco documentation available on the Cisco websitus atanapi ngahubungan rojongan teknis Cisco.