FISCHER Bicycle Lift Plus 50386 Instruction Manual

1. Produk Langkungview

The FISCHER Bicycle Lift Plus 50386 provides a space-saving solution for storing bicycles and e-bikes. Designed for ceiling mounting, it utilizes a rope roller system to safely lift and lower your bike, freeing up floor space in garages or basements. This lift is suitable for ceilings up to 4 meters high and can support a load of up to 30 kg.

fitur konci ngawengku:

• Space-saving storage: Ideal for cellars and garages, allowing bikes to be stored overhead.
• High load capacity: Supports up to 30 kg, suitable for most standard bicycles and e-bikes.
• Paint protection: Features rubber-coated mounting hooks to prevent scratches on your bicycle frame.
• Operasi gampang: Includes a practical handle for comfortable lifting and lowering.
• jangkungna adjustable: Accommodates ceiling heights up to 4 meters.

Figure 1: FISCHER Bicycle Lift Plus installed. This image shows the complete ceiling lift system with both mounting plates, pulleys, and hooks in a lowered position, ready to receive a bicycle.

2. Émbaran Kasalametan

Mangga baca sagala parentah taliti saméméh instalasi tur pamakéan. Paranti nuturkeun parentah ieu bisa ngakibatkeun karuksakan harta atawa tatu pribadi.

• Batesan Beurat: Do not exceed the maximum load capacity of 30 kg (66 lbs). Overloading can cause the lift to fail.
• Permukaan dipasang: Ensure the ceiling or mounting surface is structurally sound and capable of supporting the weight of the lift and the bicycle. Consult a professional if unsure.
• Pamasangan: Proper installation is critical. Use all provided mounting hardware and follow the installation steps precisely.
• Clearance: Ensure adequate clearance around the bicycle when it is lifted to prevent accidental contact with walls, vehicles, or other objects.
• Inspeksi tali: Regularly inspect the rope for wear, fraying, or damage. Replace the rope immediately if any damage is observed.
• Hook Security: Always ensure the bicycle is securely seated in both hooks before lifting.
• Barudak jeung Pets: Keep children and pets away from the lift during operation.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Bicycle lift mechanism (includes two ceiling mounting plates with pulleys)
• Two bicycle hooks with integrated pulleys
• Tali
• Nanganan
• Mounting material (screws, anchors)
• Buku pituduh

4. Setup jeung Instalasi

The FISCHER Bicycle Lift Plus is designed for quick and easy ceiling mounting. Ensure you have appropriate tools (drill, screwdriver, measuring tape, pencil) and that your ceiling can support the weight.

1. Nangtukeun Lokasi Pasang: Choose a location on your ceiling that provides sufficient space for your bicycle to be lifted without obstruction. The two mounting plates should be positioned to align with the length of your bicycle.
2. Tandaan liang bor: Hold the first mounting plate against the ceiling and mark the drill holes. Repeat for the second mounting plate, ensuring they are parallel and at an appropriate distance for your bike.
3. liang bor: Drill pilot holes at the marked locations. Use appropriate drill bits for your ceiling material (wood, concrete, etc.).
4. Install Mounting Plates: Securely attach both mounting plates to the ceiling using the provided screws and anchors. Ensure they are firmly fixed.
5. Pasang Kait: Connect the two bicycle hooks to the pulleys on the mounting plates.
6. Thread the Rope: Carefully thread the rope through the pulley system as illustrated in the diagram or video. Ensure the rope runs smoothly and is not tangled. Attach the handle to the end of the rope.

Figure 2: Ceiling Mounting Plate and Hooks. This image provides a detailed view of one of the ceiling mounting plates with its integrated pulleys and the attached bicycle hook, illustrating how the components connect.

5. Parentah Operasi

Follow these steps to safely lift and lower your bicycle:

1. Prepare the Hooks: Lower the hooks using the rope and handle until they are within easy reach.
2. Position the Bicycle: Carefully position your bicycle so that the front and rear sections of the frame can be securely placed into the rubber-coated hooks.
3. Secure the Bicycle: Ensure the bicycle frame rests firmly and evenly within both hooks. The rubber coating helps prevent scratches.
4. Lift the Bicycle: Hold the rope handle firmly and pull downwards to engage the lifting mechanism. The rope roller system will assist in lifting the bicycle smoothly. Guide the bicycle as it ascends to prevent swinging.
5. Secure at Height: Once the bicycle reaches the desired height, secure the rope by tying it off or using the integrated rope cleat (if present) to prevent accidental lowering.
6. Lower the Bicycle: To lower, carefully release the rope from its secured position and slowly allow the bicycle to descend, controlling the speed with the handle.

Figure 3: Rubber-Coated Hooks. This image shows a bicycle frame securely held by the rubber-coated hook, emphasizing the design feature that protects the bike's paintwork from scratches.

Figure 4: Operating Handle. This image displays the ergonomic handle, which provides a comfortable grip for controlling the rope during the lifting and lowering of the bicycle.

6. Pangropéa

Regular maintenance ensures the longevity and safe operation of your FISCHER Bicycle Lift Plus:

• Inspeksi tali: Periodically check the entire length of the rope for any signs of wear, fraying, cuts, or knots. Replace the rope if any damage is found.
• Inspeksi katrol: Ensure all pulleys rotate freely and are not obstructed. Clean any dust or debris that may accumulate.
• Hardware dipasang: Annually check all screws and anchors for tightness. Retighten if necessary. Inspect the ceiling for any signs of stress or damage around the mounting points.
• Hook Condition: Verify that the rubber coating on the hooks is intact and not worn through. This protects your bicycle's finish.
• Lubrication: Apply a small amount of silicone spray or light lubricant to the pulley axles if they begin to squeak or show resistance.

7. Cara ngungkulan

8. Spésifikasi

9. Garansi jeung Rojongan

For specific warranty information, please refer to the documentation included with your purchase or contact FISCHER customer service directly. The manufacturer typically provides a warranty against defects in materials and workmanship.

If you encounter any issues or have questions regarding the installation, operation, or maintenance of your FISCHER Bicycle Lift Plus, please contact FISCHER customer support:

• Pabrikan: FISCHER
• Websitus: www.fischer-fahrrad.de (Please note: This is a general link to the brand's website and may not be specific to support in your region. Refer to your product packaging for regional contact details.)