Faultless Satin nikel Electronic Deadbolt Pamaké Manual

1. Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Overstock Faultless Satin Nickel Electronic Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Émbaran Kasalametan

Always follow basic safety precautions when installing and operating electronic devices. Failure to do so may result in injury or damage to the product.

• Do not expose the deadbolt to extreme temperatures or moisture.
• Use only the specified battery type (4 AA batteries, not included).
• Jauhkeun tina jangkauan barudak.
• Ensure proper alignment during installation to prevent mechanical stress.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan.

• Electronic Deadbolt Assembly (Exterior Keypad and Interior Unit)
• Parabot Pemasangan (Sekrup, Baut)
• Piring neunggeul
• Konci (pikeun ngaganti sacara manual)
• Citakan Pamasangan

Gambar 1: Hareupeun view of the Faultless Satin Nickel Electronic Deadbolt, showing the keypad and keyhole. This image displays the sleek satin nickel finish and the numerical keypad for code entry, along with the traditional key cylinder for manual access.

4. Setup jeung Instalasi

Turutan léngkah-léngkah ieu sacara saksama pikeun pamasangan anu leres.

4.1 Persiapan Panto

1. Ensure your door meets the required thickness and backset specifications.
2. Use the provided template to mark and drill holes if necessary.

4.2 Installing the Deadbolt

1. Insert the deadbolt latch into the door edge.
2. Install the exterior keypad assembly, ensuring the cable passes through the door.
3. Connect the cable to the interior unit.
4. Secure the interior unit to the door using the provided screws.
5. Install 4 AA batteries into the battery compartment of the interior unit.
6. Test the deadbolt operation with the key and manually.

5. Parentah Operasi

5.1 Pemrograman Awal

Upon first power-up, the deadbolt will be in factory default mode. You must set a master code first.

1. Press the "Program" button on the interior unit.
2. Enter a new 4-8 digit master code.
3. Press the "Lock" button to confirm.

5.2 Nambahkeun Kodeu Pangguna

Up to 10 user codes can be programmed.

1. Pencét tombol "Program".
2. Lebetkeun kode induk.
3. Press the "Program" button again.
4. Lebetkeun kodeu pangguna anyar 4-8 angka.
5. Press the "Lock" button to confirm.

5.3 Ngonci jeung Muka konci

• Pikeun muka konci: Enter a valid user code or master code on the keypad, then press the "Lock" button. The deadbolt will retract.
• Pikeun ngonci: Press the "Lock" button on the keypad or turn the thumb-turn on the interior unit. The deadbolt will extend.
• Manual Override: Use the provided physical key to lock or unlock the deadbolt at any time.

6. Pangropéa

Regular maintenance ensures the longevity and proper function of your electronic deadbolt.

• Ngagantian batré: Replace batteries when the low battery indicator illuminates or when the deadbolt becomes unresponsive. Always use new AA alkaline batteries.
• beberesih: Clean the exterior keypad with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Lubrication: Lumasi mékanisme kait deadbolt sacara périodik ku pelumas basis silikon pikeun mastikeun operasi anu lancar.

7. Cara ngungkulan

Tingali kana bagian ieu pikeun masalah umum sareng solusina.

8. Spésifikasi

• model: Teu salah
• rengse: Satin Nikel
• Bahan: Nickel, Metal
• Sumber Daya: 4 Batré AA (teu kalebet)
• Master Code Capacity: 1
• User Code Capacity: Nepi ka 10
• Jenis konci: Electronic Deadbolt with Key Override
• Dianjurkeun pamakéan: Residential doors

9. Garansi jeung Rojongan

For warranty information or technical support, please contact Overstock customer service. Keep your purchase receipt as proof of purchase.

Inpormasi kontak: Refer to the Overstock official website or your purchase documentation for the most current support contact details.