Faultless yuswa Perunggu Electronic Deadbolt Manual Pamaké

Bubuka

Thank you for choosing the Faultless Aged Bronze Electronic Deadbolt. This manual provides detailed instructions for the installation, operation, programming, and maintenance of your new electronic deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

This electronic deadbolt offers enhanced security and convenience with its keypad entry system, allowing for keyless access. It features a durable aged bronze finish and is designed for residential use.

Émbaran Kasalametan

• Do not attempt to disassemble or modify the lock. This may cause damage to the product and void the warranty.
• Anggo ngan ukur jinis batré anu ditangtukeun (4 batré AA). Ulah nyampur batré lami sareng énggal atanapi jinis batré anu béda.
• Keep all keys and access codes in a secure location to prevent unauthorized access.
• Avoid exposing the lock to extreme temperatures, direct sunlight, or excessive moisture.
• Ensure the door frame and door are properly aligned and in good condition before installation to prevent binding or malfunction.
• Produk ieu ngandung bahan kimia anu dipikanyaho Nagara California pikeun nyababkeun kanker sareng cacad kalahiran atanapi cilaka réproduktif sanés. Ngumbah leungeun sanggeus nanganan.

Eusi pakét

Punten parios yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Electronic Deadbolt Exterior Assembly (Keypad)
• Electronic Deadbolt Interior Assembly (Thumb Turn)
• Mékanisme Kait Deadbolt
• Lempeng Pamasangan
• Piring neunggeul
• Pamasangan screws
• Konci (pikeun ngaganti sacara manual)
• Manual pangguna (dokumén ieu)

Catetan: 4 batré AA diperyogikeun pikeun operasi sareng henteu kalebet dina pakét.

Setup sareng Instalasi

Before you begin, ensure your door is prepared for a standard deadbolt installation. You may need a Phillips head screwdriver and a measuring tape.

1. Install the Latch Mechanism

1. Insert the deadbolt latch into the edge bore hole of the door. Ensure the "UP" arrow on the latch is pointing upwards.
2. Pasangkeun kaitna nganggo sekrup anu disayogikeun.

2. Pasang Majelis Exterior

1. Feed the cable and spindle through the center hole of the latch mechanism.
2. Align the exterior keypad assembly with the door and press it firmly against the door surface.

3. Pasang Plate Mounting

1. Route the cable from the exterior assembly through the rectangular hole in the mounting plate.
2. Secure the mounting plate to the exterior assembly using the long screws provided, ensuring the spindle passes through the center hole of the mounting plate.

4. Pasang Majelis Interior

1. Sambungkeun kabel tina rakitan luar ka port dina rakitan interior.
2. Align the interior assembly with the mounting plate, ensuring the spindle engages with the thumb turn mechanism.
3. Secure the interior assembly to the mounting plate using the short screws provided.

5. Masang Batre

1. Cabut panutup batré dina assembly interior.
2. Insert 4 new AA alkaline batteries, observing the correct polarity (+/-).
3. Ganti panutup batré.

6. Install Strike Plate

1. Align the strike plate with the deadbolt hole on the door frame.
2. Secure the strike plate with the provided screws. Ensure the deadbolt extends smoothly into the strike plate when locked.

Gambar: Hareupeun view of the Faultless Aged Bronze Electronic Deadbolt, showing the keypad and keyhole.

Parentah Operasi

Ngonci Panto

• Ti luar: Press the "LOCK" button (if available, or a specific button for locking) or press any key for 2 seconds. The deadbolt will extend.
• Ti jero: Rotate the thumb turn on the interior assembly to the horizontal position.

Muka konci Panto

• From the outside (Keypad): Enter your valid User Code (or Master Code) followed by the "LOCK" button (or specific enter button). The deadbolt will retract.
• From the outside (Key): Insert the physical key into the keyhole and turn it to unlock.
• Ti jero: Rotate the thumb turn on the interior assembly to the vertical position.

Gambar: Angled view of the Faultless Aged Bronze Electronic Deadbolt, highlighting the keypad and finish.

Kodeu Programming

Your deadbolt supports one Master Code and up to 10 User Codes. The Master Code is used for programming and should be kept confidential. User Codes are for daily entry.

Setting the Master Code (First Time Setup)

The lock comes with a default programming code. You must change this to your unique Master Code immediately after installation.

1. Buka panutup batré dina rakitan interior.
2. Press the "Program" button (usually a small button on the interior assembly). The keypad will illuminate.
3. Enter the default Master Code (refer to a sticker on the interior assembly or quick start guide, typically 123456).
4. Press the "LOCK" button.
5. Enter your new Master Code (4-10 digits).
6. Press the "LOCK" button again to confirm. A successful tone will sound.

Nambahkeun Kodeu Pamaké

1. Pencét tombol "Program".
2. Lebetkeun Kodeu Master anjeun.
3. Press the "LOCK" button.
4. Enter a new User Code (4-10 digits).
5. Press the "LOCK" button again to confirm. A successful tone will sound.
6. Repeat for additional user codes (up to 10).

Ngahapus Konci Anggota

1. Pencét tombol "Program".
2. Lebetkeun Kodeu Master anjeun.
3. Press the "LOCK" button.
4. Lebetkeun Kodeu Pamaké anu anjeun badé pupus.
5. Press the "LOCK" button again. A successful tone will sound, and the code will be deleted.

Note: Individual user codes cannot be deleted. To remove a user code, you typically need to reset all user codes or overwrite them. Consult the specific instructions that came with your lock for advanced programming options.

Pangropéa

• Ngagantian batré: When the batteries are low, the lock may emit a series of beeps or the keypad may not illuminate as brightly. Replace all 4 AA batteries promptly. Always use new, high-quality alkaline batteries.
• beberesih: Rapihkan bagian luar konci dengan lembut, damp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
• Alignment panto: Periodically check that your door and frame are properly aligned. Misalignment can cause the deadbolt to bind, leading to excessive battery drain or malfunction.

Pamérésan masalah

spésifikasi

• merek: Overstock
• Jumlah modél: GA7X7D01AA
• UPC: 050134988286
• Jenis konci: Electronic Deadbolt with Keypad and Key Override
• Bahan: Bronze, Metal
• rengse: Perunggu Umur
• Ukuran (L x W x H): 5.8 x 4.6 x 7.5 inci
• Sumber Daya: 4 Batré AA (teu kalebet)
• Master Codes: 1
• Kodeu pamaké: Nepi ka 10
• Protokol konektipitas: Wi-Fi (as per product specifications, though typical for smart locks, this is an electronic deadbolt)
• Jenis Controller: Mechanical knob (for interior thumb turn)

Garansi sareng Rojongan

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Overstock customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, you may visit the Overstock website or contact their support line. Please have your model number (GA7X7D01AA) and UPC (050134988286) ready when contacting support.