Klipsch SUB-120

Klipsch Synergy Black Label Sub-120 Subwoofer Instruction Manual

1. Bubuka

This manual provides essential information for the proper installation, operation, and maintenance of your Klipsch Synergy Black Label Sub-120 front-firing 12” subwoofer. Designed to deliver powerful bass, this subwoofer features 200 watts of continuous power and 400 watts of dynamic power, driven by an all-digital amplifier for accurate sound reproduction. It is compatible with most AV receivers, enhancing any home theater setup with deep, thundering bass.

Klipsch Synergy Black Label Sub-120 Subwoofer, front view with copper cone visible

Figure 1: Klipsch Synergy Black Label Sub-120 Subwoofer, showcasing its front-firing design and distinctive copper cone.

Klipsch Synergy Black Label Sub-120 Subwoofer with grille attached

Figure 2: Klipsch Synergy Black Label Sub-120 Subwoofer with its strong, flexible, and removable grille in place.

2. Émbaran Kasalametan penting

Please read all safety instructions before operating this product. Keep this manual for future reference. Adhere to all warnings on the product and in the operating instructions.

  • Sumber Daya: Only connect the subwoofer to a power supply of the type described in the operating instructions or as marked on the appliance.
  • Ventilasi: Ensure proper ventilation. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Panas: Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
  • Cai sareng Uap: Ulah nganggo alat ieu caket cai atanapi dina lingkungan anu lembab teuing.
  • beberesih: Ngabersihan ngan ku kaén garing.
  • Palayanan: Entong nyobian ngalayanan produk ieu nyalira. Rujuk sadayana ngalayanan ka tanaga jasa anu mumpuni.

3. Naon dina Box

Saatos ngabongkar bungkusan, mangga pariksa yén sadaya item di handap ieu kalebet:

  • Klipsch Synergy Black Label Sub-120 Subwoofer
  • Kabel listrik
  • Manual Pitunjuk (dokumén ieu)

Note: Connection wires (e.g., RCA cables) are not included and must be purchased separately.

4. Setélan

4.1 Panempatan Subwoofer

For optimal performance and bass response, it is recommended to place your Klipsch Sub-120 subwoofer in a corner of the room. Corner placement utilizes the room's acoustics to enhance bass output and provide a more immersive audio experience.

4.2 Sambungan

The Klipsch Sub-120 offers flexible connection options to integrate with almost any AV receiver or stereo system.

  • Input LFE (Efek Frékuénsi Leutik): For receivers with a dedicated subwoofer output (LFE or SUB OUT), connect a single RCA cable from the receiver's subwoofer output to the LFE input on the subwoofer. This is the recommended connection for home theater systems.
  • Line In (Stereo RCA Inputs): If your receiver does not have an LFE output, connect stereo RCA cables from your receiver's pre-out (left and right) to the corresponding Line In (L/R) inputs on the subwoofer.
Close-up of the Klipsch Sub-120 back panel showing Line In and LFE inputs

Gambar 3: Detil view of the Line In and LFE input connections on the subwoofer's rear panel.

4.3 Sambungan Daya

Once audio connections are made, connect the provided power cord to the subwoofer's power input and then to a suitable wall outlet (100-240V, 50/60Hz 2A).

5. Ngoperasikeun Subwoofer

The Klipsch Sub-120 features several controls on its rear panel to fine-tune its performance to your listening environment and preferences.

Klipsch Sub-120 back panel showing all controls and connections

Figure 4: Rear panel of the Klipsch Sub-120, illustrating the location of all controls and inputs.

5.1 Kontrol Leuwihview

  • GAIN (Volume) Control: Saluyukeun tingkat kaluaran sakabéh subwoofer nu. Mimitian ku setting anu handap sareng laun-laun ningkat dugi ka bass nyampur mulus sareng speaker utama anjeun.
  • LOW-PASS (Crossover) Control: This knob sets the upper frequency limit for the subwoofer. Frequencies above this setting will not be reproduced by the subwoofer. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is 80Hz, but it can be adjusted between 40Hz and 120Hz.
  • PHASE Switch (0°/180°): This switch adjusts the phase of the subwoofer's output relative to your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass response in your listening position.
  • ON/AUTO/OFF Switch:
    • ON: Subwoofer tetep hurung terus.
    • Otomatis: The subwoofer automatically turns on when an audio signal is detected and enters standby mode after a period of inactivity.
    • Pareuman: Subwooferna dipareuman.

6. Pangropéa

To ensure the longevity and optimal performance of your Klipsch Sub-120 subwoofer, follow these simple maintenance guidelines:

  • beberesih: Use a dry, soft cloth to wipe down the cabinet. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
  • Perawatan grille: The subwoofer features a removable grille. If cleaning is necessary, gently remove the grille and use a soft brush or vacuum cleaner with a brush attachment to remove dust.
  • Ventilasi: Pariksa sacara périodik yén liang ventilasi bersih tina lebu sareng runtah pikeun nyegah panas teuing.
  • Panyimpenan: Upami nyimpen subwoofer kanggo waktos anu lami, pegatkeun sambungan tina listrik teras simpen di tempat anu tiis sareng garing, langkung saé dina bungkus aslina.

7. Cara ngungkulan

If you encounter issues with your Klipsch Sub-120 subwoofer, refer to the following common problems and solutions:

MasalahMungkin Cukang lantarananaSolusi
Taya Sora ti Subwoofer
  • Kabel listrik teu nyambung atanapi stop kontak teu aktip.
  • Subwoofer is in OFF mode or AUTO mode without signal.
  • Audio cable not connected or faulty.
  • Receiver's subwoofer output is disabled or volume is too low.
  • Check power connections and wall outlet.
  • Set ON/AUTO/OFF switch to ON or ensure audio signal is present for AUTO mode.
  • Verify audio cable connections; try a different cable.
  • Check receiver settings for subwoofer output and volume.
Bass menyimpang atanapi teu jelas
  • GAIN (volume) set too high.
  • LOW-PASS (crossover) set incorrectly.
  • Setélan fase anu salah.
  • Masalah panempatan subwoofer.
  • Reduce the GAIN control on the subwoofer.
  • Adjust the LOW-PASS control to blend with main speakers.
  • Toggle the PHASE switch (0°/180°) to find the best sound.
  • Ékspérimén sareng panempatan subwoofer anu béda.
Subwoofer Not Turning On Automatically
  • ON/AUTO/OFF switch not set to AUTO.
  • Input signal too low to trigger auto-on.
  • Ensure the switch is set to AUTO.
  • Increase the output level from your receiver's subwoofer output.

8. Spésifikasi

Detailed technical specifications for the Klipsch Synergy Black Label Sub-120 Subwoofer:

FiturRincian
Ngaran modélSUB-120
Tipe SpeakerSubwoofer
Diaméter Subwoofer12 inci
Jenis WooferSpun copper front-firing Cerametallic woofers
Daya Terus-terusan200 Watt
Daya dinamis400 Watt
Amplifier TipeDigital Amppangagung
Réspon FrékuénsiUp to 20 KHz (adjustable via Low-Pass filter)
Téhnologi konektipitasWired (RCA Line In/LFE)
Métode kontrolManual (Gain, Low-Pass, Phase, Power)
Ukuran produk (D x W x H)19.25" x 14" x 16"
Item Beurat36.4 pon
WarnaHideung
BahanWood cabinet, Copper woofer
Sumber DayaKabel Listrik
Dianjurkeun MangpaatHome Theater, Televisions, Gaming Consoles, Streaming Devices
Diagram showing the dimensions of the Klipsch Sub-120 Subwoofer: 16 inches H, 14 inches W, 19.25 inches D

Figure 5: Dimensions of the Klipsch Synergy Black Label Sub-120 Subwoofer.

9. Garansi jeung Rojongan

9.1 Émbaran jaminan

The Klipsch Synergy Black Label Sub-120 Subwoofer comes with a Garansi kawates. For specific terms, conditions, and duration of the warranty, please refer to the warranty card included with your product or visit the official Klipsch websitus.

9.2 Rojongan Palanggan

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Klipsch Customer Support. Contact information can typically be found on the Klipsch official websitus atanapi dina bungkusan produk.

Sumberdaya Online: Visit the official Klipsch websitus kanggo FAQ, pendaptaran produk, sareng sumber daya dukungan tambahan.

Dokumén Patali - SUB-120

Praview Buku Panduan Pangguna Klipsch Synergy Black Label: Setelan sareng Operasi
Buku pituduh lengkep pikeun spiker Klipsch Synergy Black Label, kalebet setelan, panempatan rohangan, sambungan, sareng pitunjuk kaamanan pikeun modél sapertos F-300, F-200, B-200, B-100, C-200, SUB 120, sareng SUB 100.
Praview Manual Pamaké Subwoofers Rujukan Klipsch
Buku pituduh pikeun subwoofer Seri Referensi Klipsch, kalebet modél R-10SW sareng R-12SW. Nyayogikeun pitunjuk setelan, sambungan, kontrol, sareng perawatan pikeun kinerja audio anu optimal.
Praview Manual Pamaké Subwoofer Rujukan Klipsch R-120SWi
Manual pamaké pikeun Klipsch R-120SWi Reference Subwoofer, ngawengku inspeksi, positioning, kadali, sambungan kabel jeung nirkabel, perawatan, sarta pendaptaran produk. Diajar kumaha nyetél sareng nganggo subwoofer Klipsch anjeun pikeun pagelaran audio anu optimal.
Praview Manual Pamaké Subwoofers Rujukan Klipsch
Manual pamaké resmi pikeun subwoofers Klipsch Rujukan (R-8SW, R-10SW, R-12SW). Diajar ngeunaan setelan, sambungan, kadali, posisi, jeung miara sistem sora Klipsch Anjeun.
Praview Klipsch REFERENCE Teater 5.1 Manual Pamilik
Buku pituduh ieu nyadiakeun pitunjuk kaamanan penting, pituduh setelan, sareng detil operasional pikeun sistem spiker Klipsch REFERENCE Theatre 5.1. Diajar ngeunaan panempatan spiker, sambungan kabel, setelan subwoofer, jeung parentah perawatan.
Praview Speaker Klipsch Synergy Series: Buku Panduan & Garansi pikeun nu Boga
Buku panduan lengkep pikeun nu boga sareng inpormasi garansi pikeun loudspeaker Klipsch Synergy Series, kalebet modél SB-1, SC.5, sareng SS.5. Ngawengku setelan, kaamanan, spésifikasi, sareng garansi terbatas.