Bearware B081HCF7WR

Buku Panduan Colokan Termostat Digital Bearware (Modél B081HCF7WR)

1. Bubuka

1.1 Produk Leuwihview

The Bearware Digital Thermostat Plug is designed for temperature-controlled switching of heating and cooling appliances. It allows you to set a desired room temperature, and the device will automatically turn connected appliances on or off to maintain that temperature. This programmable thermostat is suitable for use with various electric heaters, air conditioners, and other temperature-sensitive devices.

1.2 Fitur konci

  • Kontrol Suhu: Regulates temperature between 1°C and 45°C with an accuracy of ±0.5°C.
  • Layar LCD ageung: Features a clear 5 cm LCD for easy reading of time, temperature, and mode settings.
  • Bisa diprogram: Offers flexible programming options for daily schedules and temperature settings.
  • Anti-frost Function: Automatically activates heating if the room temperature drops below 2°C to prevent freezing.
  • Mode Ganda: Supports both heating and cooling modes.
  • Operasi gampang: Simple button interface for setting time, temperature, and programs.

1.3 Eusi pakét

  • Bearware Digital Thermostat Plug
  • Instruksi Manual

2. Parentah Kasalametan

Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or injury.

  • Alat ieu kanggo dianggo di jero rohangan wungkul.
  • Do not expose the device to moisture, direct sunlight, or extreme temperatures.
  • Ensure the device is properly plugged into a grounded outlet.
  • Ulah overload stop kontak listrik.
  • Ulah ngabongkar atanapi nyobian ngalereskeun alat sorangan. Kontak personil mumpuni pikeun layanan.
  • Jauhkeun tina jangkauan barudak.
  • Cabut colokan alat tina stop kontak sateuacan beberesih.

3. Komponén produk

Familiarize yourself with the components of your Bearware Digital Thermostat Plug:

Hareupeun view of the Bearware Digital Thermostat Plug, showing the display and control buttons.

Gambar 1: Hareupeun view of the Bearware Digital Thermostat Plug, showing the display and control buttons. The display shows current time, day, room temperature, and set temperature. Buttons include Power, Set, OK, Up, and Down.

  • Layar LCD: Shows current time, day, room temperature, set temperature, and operating mode icons.
  • Tombol Daya (⏻): Ngahurungkeun atanapi mareuman alat.
  • Tombol SET: Enters programming mode and confirms selections.
  • Tombol OK: Confirms settings during programming.
  • Up Arrow Button (▲): Ningkatkeun nilai atanapi navigasi ménu.
  • Tombol Panah Ka handap (▼): Ngurangan nilai atanapi navigasi ménu.
  • Integrated Socket: For connecting your heating or cooling appliance.

4. Setup jeung Konfigurasi Awal

4.1 Mimiti Power-Up

  1. Plug the Bearware Digital Thermostat Plug into a standard wall outlet.
  2. The display will light up, and the device will be in standby mode or show default settings.

4.2 Nyetél Waktos sareng Poé

To ensure accurate scheduling, set the current time and day:

Quick start guide diagram for the Bearware Digital Thermostat Plug, illustrating time setting, mode selection, and timer programming.

Gambar 2: Quick start guide diagram showing steps for time setting, heating/cooling mode selection, manual temperature setting, and timer programming.

  1. Pencét jeung tahan tombol SET button for approximately 3 seconds until the clock symbol on the display starts blinking.
  2. Ngagunakeun éta Panah Ka Luhur (▲) or Panah Ka Handap (▼) tombol pikeun nyaluyukeun menit. Pencét OK pikeun mastikeun.
  3. The hour display will start blinking. Use the Panah Ka Luhur (▲) or Panah Ka Handap (▼) buttons to adjust the hours. Press OK pikeun mastikeun.
  4. The day of the week will start blinking. Use the Panah Ka Luhur (▲) or Panah Ka Handap (▼) buttons to select the current day. Press OK pikeun mastikeun.
  5. The device will automatically exit the time setting menu after a few seconds, or you can briefly press the Kakuatan (⏻) tombol pikeun kaluar.

5. Modeu Operasi

5.1 Heating and Cooling Mode Selection

The thermostat can operate in either heating or cooling mode. By default, the device is set to heating mode.

  1. Pencét jeung tahan tombol Panah Ka Luhur (▲) button for approximately 3 seconds to enter the basic settings menu.
  2. Ngagunakeun éta Panah Ka Luhur (▲) or Panah Ka Handap (▼) buttons to toggle between the heating mode (indicated by a PANAS icon, typically a flame) and cooling mode (indicated by a COOL icon, typically a snowflake).
  3. After 5 seconds of inactivity, the setting will be saved, and the device will return to the main display.
  4. In Modeu pemanasan, the connected appliance will turn on if the room temperature is below the set target temperature.
  5. In Modeu tiis, the connected appliance will turn on if the room temperature is above the set target temperature.

5.2 Kontrol Suhu Manual

To set a specific target temperature manually:

  1. Pencét sakeudeung SET button until the manual mode icon (a hand with an index finger) appears on the display.
  2. Ngagunakeun éta Panah Ka Luhur (▲) or Panah Ka Handap (▼) buttons to adjust the desired target temperature.
  3. The connected heating or cooling appliance will switch on or off according to the selected mode and the newly set temperature.
  4. To exit manual mode, briefly press the SET tombol deui.

5.3 Programmable Timer Mode (ON/OFF Times)

You can program specific ON and OFF times for your connected appliance:

  1. Pencét jeung tahan tombol SET button for approximately 3 seconds to enter the time setting menu.
  2. Pencét éta SET button once briefly to activate the ON time setting. The 'ON' symbol will blink.
  3. Ngagunakeun éta Panah Ka Luhur (▲) or Panah Ka Handap (▼) buttons to set the desired ON hour, then press OK.
  4. Ngagunakeun éta Panah Ka Luhur (▲) or Panah Ka Handap (▼) buttons to set the desired ON minute, then press OK.
  5. Pencét éta SET button twice briefly to activate the OFF time setting. The 'OFF' symbol will blink.
  6. Ngagunakeun éta Panah Ka Luhur (▲) or Panah Ka Handap (▼) buttons to set the desired OFF hour, then press OK.
  7. Ngagunakeun éta Panah Ka Luhur (▲) or Panah Ka Handap (▼) buttons to set the desired OFF minute, then press OK.
  8. The device will automatically save the settings and exit the menu after a few seconds.

5.4 Anti-frost Function

The thermostat includes an anti-frost function to protect your space from freezing temperatures. If the room temperature drops below 2°C, the device will automatically activate the connected heating appliance to raise the temperature above the freezing point, preventing damage from cold.

6. Pangropéa

6.1 beberesih

  1. Sok cabut colokan alat tina stop kontak samemeh beberesih.
  2. Wipe the exterior of the thermostat with a soft, dry cloth.
  3. Ulah nganggo pembersih abrasif, pangleyur, atanapi bahan kimia anu keras, sabab ieu tiasa ngaruksak permukaan.
  4. Pastikeun teu aya cairan anu asup kana alat.

6.2 Panyimpenan

If storing the device for an extended period, unplug it and store it in a cool, dry place away from direct sunlight and extreme temperatures.

7. Cara ngungkulan

If you encounter issues with your Bearware Digital Thermostat Plug, refer to the following common problems and solutions:

  • Henteu aya tampilan:
    • Ensure the thermostat is securely plugged into a working power outlet.
    • Check if the power outlet itself is functional by plugging in another device.
  • Bacaan Suhu Lepat:
    • Ensure the thermostat is not placed near heat sources (e.g., direct sunlight, appliances) or cold drafts, which can affect its sensor.
    • Allow some time for the sensor to stabilize after initial plug-in or relocation.
  • Appliance Not Switching On/Off:
    • Verify that the thermostat is in the correct operating mode (heating or cooling) for your appliance.
    • Check that the set target temperature is appropriate for the desired action (e.g., for heating, set temperature higher than room temperature).
    • Ensure the connected appliance is switched on and functioning correctly.
    • Review your programmed ON/OFF times if using timer mode.
  • Tombol teu responsif:
    • Try unplugging the device from the wall outlet for a few seconds and then plugging it back in to reset it.

Lamun masalah persists sanggeus nyobian solusi ieu, mangga ngahubungan rojongan customer.

8. Spésifikasi Téknis

Dimensional drawing of the Bearware Digital Thermostat Plug, illustrating its length, width, and depth.

Gambar 3: Dimensions of the Bearware Digital Thermostat Plug, showing measurements in millimeters.

  • Jumlah modél: B081HCF7WR
  • Sasayogian tanaga: 200-240 V ~ AC / 50 Hz
  • Max. Beban: 16 A
  • Rentang Suhu anu tiasa disaluyukeun: 1°C - 45°C
  • Akurasi Kontrol Suhu: ±1°C (as per specifications, A+ content states ±0.5°C)
  • Sénsor Suhu: NTC
  • Self-Consumption Power: 1.3 W
  • Input: 1x Type E plug
  • Kaluaran: 1x Type F female socket
  • Jenis colokan: EU (Euro)
  • tampilan: 5 cm (2 inch) LCD
  • Ukuran (L x W x H): Kira-kira 14 x 3 x 8 cm
  • beurat: Kira-kira 246 g
  • warna: Bodas

9. Garansi jeung Rojongan

Kanggo inpormasi garansi atanapi dukungan téknis, mangga tingali bungkus produk atanapi hubungi produsén langsung. Simpen resi pameseran anjeun salaku bukti pameseran.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.