MoKo B07ZLP253T

MoKo Smart Plug Mini WiFi Outlet Instruction Manual

Brand: MoKo | Model: B07ZLP253T

Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your MoKo Smart Plug Mini WiFi Outlet (Model B07ZLP253T). Please read this manual thoroughly before using the device to ensure proper functionality and safety.

MoKo Smart Plug Mini WiFi Outlet

Image: MoKo Smart Plug Mini WiFi Outlet, showing its compact design and standard US plug type.

Guide Setup

Follow these steps to set up your MoKo Smart Plug:

  1. Download the "Smart Life" App: Milarian pikeun "Smart Life" in your mobile app store (Android 4.4+ or iOS 8+ required) and install it.
  2. Ngadaptar/Log: Buka aplikasi teras daptarkeun akun énggal atanapi lebet nganggo akun anu tos aya.
  3. Colokkeun Colokan Pinter: Insert the MoKo Smart Plug into a standard wall outlet.
  4. Reset Alat: Press and hold the button on the smart plug until the indicator light blinks rapidly. This indicates it's in pairing mode.
  5. Tambahkeun Alat dina App: In the "Smart Life" app, tap the "+" icon to add a new device. Select "Electrical" then "Socket (Wi-Fi)".
  6. Confirm Blinking Light: Confirm that the indicator light on the smart plug is blinking rapidly in the app.
  7. Nyambung ka Wi-Fi: Lebetkeun nami jaringan Wi-Fi 2.4GHz sareng kecap akses anjeun. Catetan: The smart plug only supports 2.4GHz Wi-Fi networks. 5.0GHz networks are not supported.
  8. papasangan: The app will begin connecting to the smart plug. Keep your phone, router, and the device as close as possible during this process.
  9. Parantosan: Once connected, the app will confirm "Device added successfully". You can then rename the device for easier control.

Video: Step-by-step guide on how to set up and pair the MoKo Smart Plug with the Smart Life application.

MoKo Smart Plug with two units in an outlet

Image: Two MoKo Smart Plugs installed in a standard duplex wall outlet, demonstrating their compact size.

Operasi

1. Jauh Control via App

Once connected, you can control your appliances from anywhere using the "Smart Life" app. Simply tap the power icon to turn devices on or off.

Smart Life app interface for remote control

Image: Screenshot of the Smart Life app showing the remote control interface with options for scene, timer, group, share, and monitor functions.

2. Kontrol sora

The MoKo Smart Plug is compatible with Amazon Alexa and Google Assistant. Link your "Smart Life" account to your voice assistant app to enable hands-free control.

Kontrol sora sareng Amazon Alexa sareng Asisten Google

Image: Illustration of voice control functionality with Amazon Alexa and Google Assistant, showing a smart speaker and a lamp.

3. Fungsi Penjadwalan sareng Timer

Set schedules for your devices to turn on or off automatically at specific times. You can also set a countdown timer for temporary control.

Timing management for smart plug

Image: Diagram illustrating various timing management scenarios for smart plugs, such as turning on bedroom lights at 8:00 AM or turning off a bedside lamp at 9:00 PM.

4. Pangimeutan énergi

The smart plug provides current measurement and monitoring, allowing you to track the electrical consumption of connected devices through the app.

Energy monitoring interface in Smart Life app

Image: Screenshot of the Smart Life app displaying energy monitoring data, including current, power, voltage, and total kWh consumption.

5. Group Control and Device Sharing

Manage multiple smart plugs simultaneously by creating groups. You can also share control of your devices with family members.

Group control and device sharing features

Image: Visual representation of group control and device sharing features within the Smart Life app, showing multiple devices grouped and a family sharing screen.

Pangropéa

To ensure the longevity and safe operation of your MoKo Smart Plug, follow these maintenance guidelines:

Pamérésan masalah

If you encounter issues with your MoKo Smart Plug, refer to the following common solutions:

MasalahSolusi
Device not connecting to Wi-Fi / Blinking light not fast enough.
  • Pastikeun jaringan Wi-Fi anjeun 2.4GHz. Jaringan 5.0GHz teu dirojong.
  • Press and hold the button on the smart plug for 5-10 seconds until the indicator light blinks rapidly.
  • Ensure your mobile device is connected to the same 2.4GHz Wi-Fi network.
  • Pindahkeun colokan pinter leuwih deukeut kana router Wi-Fi anjeun nalika setelan.
  • Try "AP Mode" in the Smart Life app if "EZ Mode" fails.
Alat sering dipegatkeun tina Wi-Fi.
  • Check your Wi-Fi signal strength at the smart plug's location.
  • Ensure your router is functioning correctly and not overloaded.
  • Update the smart plug's firmware via the Smart Life app if available.
  • Consider reducing the number of devices on your 2.4GHz network.
Device not responding to app or voice commands.
  • Verify the smart plug is powered on and connected to Wi-Fi (indicator light solid blue).
  • Pariksa sambungan internét anjeun.
  • Pastikeun aplikasi "Smart Life" diénggalan kana vérsi pangénggalna.
  • For voice control, confirm your "Smart Life" account is correctly linked to Alexa or Google Assistant.
  • Try restarting the smart plug by unplugging and re-plugging it.
Smart plug fails when connecting high-power appliances.
  • The smart plug has a maximum load current of 16A resistive. Do not exceed this limit.
  • Pariksa wattage/amperage of the connected appliance. If it exceeds 16A, use a different outlet or a smart plug designed for higher loads.
  • The device has current overload protection, which may trip if the load is too high.

spésifikasi

FiturRincian
merekMoKo
ModélB07ZLP253T
Peunteun ayeuna16 Amps (Resistive Max)
Wattage1920W
Protokol konektipitasWi-Fi (2.4GHz wungkul)
Tipe ControllerAmazon Alexa, Android, Google Assistant, IFTTT, SmartThings, iOS
Métode kontrolJauh
BahanFlame Retardant PC, Copper
Ukuran barang (L x W x H)2.91 x 2.64 x 2.32 inci
Item Beurat2.29 ons
WarnaBodas
SertifikasiFCC/ROHS certified

Garansi sareng Rojongan

For warranty information or technical support, please refer to the official MoKo websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Sarat jaminan spésifik tiasa béda-béda dumasar daérah sareng lokasi pameseran.

Anjeun tiasa nganjang ka Toko MoKo di Amazon pikeun émbaran leuwih produk jeung sumber rojongan.

Dokumén Patali - B07ZLP253T

Praview MOKO M117 Series WIFI Smart Colokkeun Produk spésifikasi
Spésifikasi produk komprehensif pikeun MOKO M117 Series WIFI Smart Plug, ngajéntrékeun fitur-fiturna, aplikasi di imah pinter, kantor, laboratorium, sareng sistem tatasurya, spésifikasi téknis, sareng sumber pangembangan.
Praview Pituduh Konfigurasi Aplikasi MOKO LW005-MP
Pituduh ieu nyayogikeun pitunjuk lengkep ngeunaan cara ngonpigurasikeun colokan pinter MOKO LW005-MP LoRaWAN nganggo aplikasi MKLoRa. Pituduh ieu ngawengku pamasangan, sambungan, parameter LoRaWAN, setélan umum, konfigurasi Bluetooth, sareng inpormasi alat.
Praview MOKO H3 Bluetooth Beacon: Lembar Data sareng Spésifikasi Téknis
Lembar data lengkep pikeun MOKO H3 Bluetooth Beacon, anu nampilkeun akselerometer 3-sumbu, kompatibilitas iBeacon/Eddystone, umur batré anu panjang, sareng parameter anu tiasa dikonfigurasi pikeun aplikasi IoT. Ngawengku karakteristik fisik, pernyataan FCC, sareng dukungan téknis.
Praview Pituduh Pangguna LW003-B PRO - MOKO Bluetooth-LoRaWAN Bridge
Pituduh pangguna anu lengkep pikeun MOKO LW003-B PRO, sasak Bluetooth-LoRaWAN pikeun pelacakan aset sareng pangawasan lingkungan. Ngawengku spésifikasi anu lengkep, konfigurasi, protokol komunikasi, sareng patuh FCC.
Praview MOKO MK01-KIT Evaluasi Board Guide pamaké
User guide for the MOKO MK01-KIT evaluation board, detailing its features, circuit design, functional blocks, power supply options, pin assignments, switch configurations, and package contents. Supports MOKO MK01 series Bluetooth modules.
Praview MOKO MK105 Bluetooth Gateway Colokkeun Manual Pamaké
User manual for the MOKO MK105 Bluetooth Gateway Plug, detailing setup, configuration, and operation via the Mokoscanner mobile application. Learn how to connect to Wi-Fi, configure MQTT servers (EMQTT, AWS), scan BLE devices, set filters, perform OTA updates, and manage device settings.