Bubuka
The Pro-Ject T1 Phono SB Turntable is a high-fidelity, European-built belt-drive turntable designed to deliver exceptional audio performance. This model features an integrated phono preamplifier and electronic speed control, ensuring a seamless and high-quality listening experience for your vinyl collection.
Key features include a factory-pre-set tonearm and cartridge for easy installation, an 8mm thick bead-blasted glass platter for stable playback, and precise electronic selection for both 33 1/3 and 45 RPM speeds. The built-in phono preamp is bypassable, offering flexibility for connection to various audio systems.
Gambar: A close-up view of the Pro-Ject T1's 8mm thick bead-blasted glass platter.
Naon dina Box
Saatos ngabongkar bungkusan, pastikeun sadaya komponén ieu aya:
- Pro-Ject T1 Phono SB Turntable
- Panutup lebu
- Ortofon OM5e Phono Cartridge (pre-mounted)
- Sambungkeun-Éta Kabel Audio Kualitas Luhur
- Setup jeung Adjustment Pakakas
- 15 V DC Power Supply
Image: The Pro-Ject T1 Phono SB Turntable in Piano Black, showcasing its sleek design and glass platter.
Disetél
The T1 Phono SB turntable is designed for easy setup, with the tonearm and Ortofon OM5e cartridge pre-installed and adjusted at the factory. Follow these steps to get started:
- panempatan: Simpen meja putar dina permukaan anu stabil sareng rata, jauh tina sinar panonpoé langsung, sumber panas, sareng geteran anu kuat.
- Pamasangan panutup debu: Carefully attach the dust cover hinges to the designated slots on the turntable plinth.
- Pamasangan piring: Place the glass platter onto the sub-platter spindle. Ensure it sits flush and rotates freely.
- Pamasangan sabuk: Gently stretch the drive belt around the sub-platter and the motor pulley. For 33 1/3 RPM, use the smaller diameter of the pulley. For 45 RPM, use the larger diameter.
- Sambungan Audio: Connect the supplied Connect-It E audio cable from the turntable's output to your amplifier's phono input (if using the internal preamp) or a line-level input (if bypassing the internal preamp and using an external phono stage). Ensure the ground wire is connected to your ampterminal taneuh lifier pikeun ngaleutikan hum.
- Sambungan Daya: Connect the 15V DC power supply to the turntable's power input and then plug it into a wall outlet.
Image: The Pro-Ject T1 Phono SB Turntable with its protective dust cover open, ready for operation.
Parentah Operasi
Operating your Pro-Ject T1 Phono SB turntable is straightforward:
- Daya Hurung: Locate the power button, typically on the underside or side of the plinth. Press it to turn on the turntable. The platter will begin to rotate.
- Pilihan Speed: Use the electronic speed control button to switch between 33 1/3 RPM and 45 RPM. The indicator light will confirm the selected speed.
- Maén Rékor:
- Teundeun catetan dina piring.
- Angkat tonearm ngagunakeun uas cueing.
- Sacara saksama posisikeun tonearm di luhur alur awal piringan anu dipikahoyong.
- Turunkeun tuas isyarat lalaunan supados stylus tiasa turun kana piringan hitam.
- Ngeureunkeun Playback:
- Angkat tonearm ngagunakeun uas cueing.
- Return the tonearm to its rest and secure it with the tonearm clip.
- Press the power button to turn off the turntable.
- Phono Praamp Bypass: The T1 Phono SB has a built-in phono preamp. If you wish to use an external phono stage, consult your turntable's specific model documentation for instructions on how to bypass the internal preamp. This usually involves a switch on the rear panel.
Gambar: A lengkep view of the T1's tonearm and the pre-mounted Ortofon OM5e phono cartridge.
Pangropéa
Pangropéa rutin mastikeun umur panjang sareng kinerja optimal turntable anjeun:
- Cleaning the Platter and Plinth: Use a soft, lint-free cloth to gently wipe the glass platter and the turntable plinth. Avoid abrasive cleaners.
- Stylus beberesih: Periodically clean the stylus using a dedicated stylus brush, brushing gently from back to front.
- Panutup lebu: Keep the dust cover closed when the turntable is not in use to protect it from dust and debris. Clean the dust cover with a soft, damp lawon.
- Sabuk drive: Inspect the drive belt periodically for wear or stretching. Replace if necessary to maintain accurate speed.
- Hindarkeun Cairan: Do not spill any liquids on the turntable. If a spill occurs, immediately disconnect power and clean thoroughly.
Pamérésan masalah
If you encounter issues with your turntable, refer to the following common solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| No power/Platter not spinning | Power cable not connected, power outlet faulty, power button off. | Check power connections, try a different outlet, ensure power button is pressed. |
| Teu aya sora atanapi volume handap | Audio cables incorrect, amplifier input wrong, phono preamp bypass switch set incorrectly. | Ensure audio cables are securely connected to the correct inputs (Phono or Line), verify phono preamp setting. |
| Sora humming | Ground wire not connected, proximity to other electronics. | Connect the ground wire to your amppangangkat. Pindahkeun turntable tina alat éléktronik lianna. |
| Kacepetan puter anu salah | Wrong speed selected, drive belt issue. | Verify speed setting (33 1/3 or 45 RPM). Check if the drive belt is properly seated and not worn. |
If the issue persists after attempting these solutions, please contact customer support or refer to the warranty information for service options.
spésifikasi
| Fitur | Rincian |
|---|---|
| merek | Pro-Ject |
| Ngaran modél | T1 Phono SB |
| Laju rotasi maksimum | 45 rpm |
| Fitur husus | Pra-dipasangamp, Belt Drive |
| Bahan | Plastic (Plinth), Glass (Platter) |
| Item Beurat | 7.14 kg |
| Warna | Piano Hideung |
| Alat nu cocog | Desktop, Headphone, Laptop, MP3 Player, Personal Computer, Smartphone, Speaker, Tablet |
| Siklus | Motor AC |
| Format Sinyal | Analog |
| Voltage | 15 Volt (DC) |
| Sumber Daya | Kabel Listrik |
| Rasio Signal-to-Noise | 75 dB |
| Téhnologi konektipitas | Dikabel |
| Ukuran barang (L x W x H) | 13.19 "L x 16.34" W x 3.94" H |
| Produsén | Sistem Audio Pro-Ject |
| UPC | 844682009681 |
| GTIN | 00844682009681 |
Garansi sareng Rojongan
The Pro-Ject T1 Phono SB Turntable comes with a garansi 2 taun covering parts and labor. The included Ortofon OM5e Phono Cartridge has a separate garansi 90 poé.
For technical support, service, or warranty claims, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems websitus kanggo inpormasi kontak. Mangga simpen bukti pameseran anjeun kanggo validasi garansi.