Bubuka
The VONETS VAP11G-300 is a versatile industrial-grade mini 2.4GHz WiFi bridge, wireless repeater, and WiFi Ethernet adapter. This device is designed to convert WiFi signals to wired Ethernet connections and vice-versa, providing flexible networking solutions for various applications. It supports WiFi 802.11b/g/n standards with a maximum transfer rate of 300Mbps, making it suitable for a wide range of network devices and scenarios.
Fitur konci
- WiFi to Ethernet Conversion: Functions as an industrial mini 2.4GHz WiFi Bridge/Wireless Repeater/WiFi Ethernet Adapter, enabling conversion between WiFi and wired Ethernet.
- Konektipitas Kecepatan Tinggi: Supports WiFi 802.11b/g/n with a WiFi rate of 300Mbps, featuring one 10/100Mbps adaptive Ethernet port.
- Suplai Daya Fleksibel: Can be powered via USB or DC (5V-15V), with a 30cm power cable including male DC and USB ports, and a parallel female DC port.
- Wide Application Compatibility: Ideal for monitoring systems, electronic scales, DVRs, IP cameras, medical devices, IoT devices, video transmission, industrial PLCs, PS3, network printers, robots, and more.
- Multiple Application Methods: Supports WiFi Repeater mode (extends WiFi signal coverage), WiFi Bridge mode (smart control for IP/MAC layer transparent transmission), and WiFi AP hotspots.
- Pungsi canggih: Features WiFi hotspot auto-reconnect, two hotspot matching methods (full match and SSID/password authentication), SSA signal strength detection, motion detection, and storage for up to 100 hotspots for auto-match connection.
Produk Leuwihview
The VONETS VAP11G-300 is a compact and robust device designed for various networking needs. Below is an image illustrating the device and its primary connections.
Image: The VONETS VAP11G-300 WiFi Bridge, showing its compact blue casing, an RJ45 Ethernet cable, and a power cable with both USB and DC barrel connectors.
The device features indicator lights for hotspot connection status and Ethernet cable connection, along with a reset button for easy configuration management.
Image: Detailed diagram of the VAP11G-300 highlighting its components: DC power supply hole, Hotspot connection status light, Ethernet cable connection light, USB port, LAN port, and Reset button.
Skenario Aplikasi
The VAP11G-300 is designed to address various networking challenges, providing solutions for situations where traditional wired or wireless setups are insufficient.
Image: Visual representation of various application scenarios for the VAP11G-300, such as extending WiFi coverage in large homes, connecting wired devices like printers or gaming consoles to a wireless network, and enabling wireless monitoring tools.
This device serves as an excellent partner for a wide array of devices that require network connectivity, especially those without built-in WiFi capabilities or in environments with weak wireless signals.
Gambar: Examples of devices that can benefit from the VAP11G-300, including IoT gateways, electronic scales, POS systems, PCs, printers, robots, network switches, medical instruments, and attendance machines.
The VAP11G-300 is particularly useful for remote video surveillance applications, offering flexible solutions for connecting cameras to recorders and monitors wirelessly.
Image: Diagram illustrating three different solutions for wireless monitoring applications using the VAP11G-300, demonstrating point-to-point or multipoint wireless connectivity for video surveillance.
Modeu Operasi
The VONETS VAP11G-300 supports two primary operating modes: AP Mode and Repeater Mode, offering flexibility for different network configurations.
Image: Illustration of AP Mode and Repeater Mode. AP Mode demonstrates converting a wired Ethernet connection to a wireless access point, while Repeater Mode shows how the device extends an existing WiFi network.
Modeu AP (Modeu Aksés Point)
In AP Mode, the VAP11G-300 converts a wired network connection into a wireless access point. This is suitable for scenarios where an Ethernet cable provides internet access to a computer, and you wish to share that internet wirelessly without dialing. The device acts as a bridge, allowing wireless devices to connect to the wired network.
Repeater Mode (Wireless Signal Repeater)
Repeater Mode extends the range of an existing WiFi signal. This mode is useful for expanding network coverage, especially in areas with weak signals or dead zones. It can also convert WiFi to an RJ45 network, allowing wired devices to connect to a wireless network, effectively acting as a wireless adapter for Ethernet-only devices.
Setup jeung Konfigurasi
Setting up the VONETS VAP11G-300 involves connecting it to power and your network devices, followed by configuration via a web interface. While specific step-by-step instructions are best found in the detailed user guide, the general process is outlined below.
- Sambungan Daya: Connect the VAP11G-300 to a power source using either the USB port or the DC port. The device supports wide voltaginput ti DC5V ka 15V.
- Sambungan awal: For initial setup, it is often recommended to connect the device directly to a computer via an Ethernet cable. Ensure your computer's Ethernet port is set to DHCP to automatically obtain an IP address from the VAP11G-300.
- Antarbeungeut Konfigurasi Aksés: Buka a web browser and navigate to the device's default IP address (typically 192.168.1.254 or similar, refer to the user guide for exact details). This will open the configuration page.
- Configure Operating Mode: Dina jero web interface, select your desired operating mode (AP Mode or Repeater Mode).
- Setélan jaringan:
- For Repeater Mode: Scan for available WiFi networks, select your desired network, and enter the WiFi password.
- For AP Mode: Configure the SSID (network name) and password for the new wireless network the VAP11G-300 will create.
- Simpen sareng Larapkeun: Save your settings and apply the changes. The device may restart.
- Sambungkeun Alat: Once configured, connect your wired devices to the VAP11G-300's Ethernet port or connect your wireless devices to the VAP11G-300's WiFi network, depending on the chosen mode.
For detailed, step-by-step instructions and specific IP addresses or login credentials, please refer to the official user guide.
spésifikasi
| Atribut | Nilai |
|---|---|
| Ngaran produk | VAP11G-300 |
| Fungsi WiFi | Pangulang/Sasak |
| Frékuénsi WiFi | 2.4GHz |
| Protokol WiFi | 802.11b/g/n |
| Laju transmisi | 300Mbps |
| Warna | Biru |
| Ukuran Alat | 90 x 45 x 15 mm (kira-kira 3.54 x 1.77 x 0.59 inci) |
| Pagawean Voltage | DC5V-15V |
| Item Beurat | 2.47 ons (kira-kira 70g) |
| Dimensi produk | 37.01 x 17.72 x 5.91 inches (This seems to be package dimensions, not device) |
| Fitur husus | WiFi Hotspot signal Extender, WiFi to Ethernet, Wired to WiFi, Wireless to Wired Wifi bridge |
Note: Product dimensions listed in specifications may refer to packaging. Actual device size is approximately 90x45x15mm.
Pamérésan masalah
If you encounter issues with your VONETS VAP11G-300, consider the following common troubleshooting steps:
- Teu aya Lampu Daya/Indikator Pareum:
- Ensure the power cable is securely connected to both the device and the power source (USB port or DC adapter).
- Pariksa sumber kakuatan aktip tur nyadiakeun vol cukuptage (DC5V-15V).
- Teu Bisa Ngaksés Kaca Konfigurasi:
- Confirm your computer is directly connected to the VAP11G-300 via Ethernet.
- Ensure your computer's Ethernet adapter is set to obtain an IP address automatically (DHCP).
- Try resetting the device to factory defaults using the reset button (refer to the user guide for the exact procedure, usually involves pressing and holding for several seconds).
- Verify the correct default IP address for the device (e.g., 192.168.1.254).
- Poor WiFi Signal/Frequent Disconnections (Repeater Mode):
- Relocate the VAP11G-300 closer to your main router or access point to improve signal strength.
- Ensure there are no major obstructions (thick walls, metal objects) between the VAP11G-300 and your main router.
- Check for interference from other 2.4GHz devices (e.g., cordless phones, microwaves).
- Verify the correct WiFi password and security settings are entered in the VAP11G-300's configuration.
- Wired Device Not Connecting (AP Mode/Bridge Mode):
- Ensure the Ethernet cable is securely connected between the VAP11G-300 and your wired device.
- Verify that the wired device's network settings are configured to obtain an IP address automatically (DHCP).
- Confirm the VAP11G-300 is properly configured in the correct operating mode.
For more in-depth troubleshooting and advanced configurations, please consult the official user guide PDF provided by Vonets.
Official User Guide and Support
For comprehensive instructions, detailed setup procedures, and advanced configurations, please refer to the official user guide provided by Vonets.
Download User Guide (PDF): VONETS VAP11G-300 User Guide
A helpful video guide demonstrating the functionality and setup of the device is also available:
Video: User Video Guide for VONETS VAP11G-300, demonstrating its functions and setup.
For further assistance or inquiries, you may contact Vonets support via email:
Email dukungan: skyfoxcn@vip.163.com
Émbaran jaminan
Specific warranty terms and conditions are typically outlined in the product's official user guide or on the manufacturer's website. Please refer to these resources for detailed warranty information regarding your VONETS VAP11G-300 device.
