KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

Bubuka

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Hareupeun view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

Gambar: Hareupeun view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Setup jeung Programming

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Léngkah-léngkah Pemrograman:

  1. Open the driver's side door of your vehicle.
  2. Insert the key into the ignition and turn it to the ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. Pencét tombol kontrol tujuh kali. Dina eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the Konci button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. Leupaskeun tombol kontrol.
  7. Hurungkeun konci ignition kana Pareum posisi jeung cabut eta.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Video: Sakedapview of KeylessOption Key Fob Remotes for Viper systems.

Parentah Operasi

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

Angled view of the KeylessOption Key Fob, showing the side profile and button layout.

Gambar: Angled view of the KeylessOption Key Fob, highlighting its ergonomic design.

Pangropéa

Ngagantian batré:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Carefully separate the two halves of the remote casing using a small flat-head screwdriver or a prying tool.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Insert the new battery with the correct orientation.
  4. Tempelkeun remot casing ngahiji deui kalawan aman.
Balik deui view of the KeylessOption Key Fob, showing the smooth casing.

Gambar: Balik view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

Pamérésan masalah

spésifikasi

merekKeylessOption
Nomer modélEZSDEI7141 474V
Alat nu cocogViper Aftermarket Alarm System
ID FCCEZSDEI7141
Jumlah Kancing4 (Lock, Unlock, Aux, Panic)
Item Beurat0.634 ons
Ukuran Paket6.77 x 4.65 x 0.47 inci

Garansi sareng Rojongan

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption websitus.

KeylessOption Warranty Card

Image: KeylessOption Warranty Card, included with each purchase.

Dokumén Patali - EZSDEI7141 474V

Praview Directed 474T 1-Way 4-Button Remote Control
Replacement 1-Way 4-Button Remote Control for Directed systems and compatible Avital, Clifford, and other brands. Features include CR2032 battery, 434Mhz frequency, and 1/4-mile range.
Praview Remote Control Compatibility and Replacement Guide
A comprehensive reference guide detailing remote control models, part numbers, date codes, and compatible replacement remotes across various brands including Automate, Clifford, Viper, and many others. Includes a section for FCC ID cross-referencing.