waveshare PI4B-4GB Display Kit

waveshare 7-inch Capacitive Touch LCD Display Kit for Raspberry Pi 4 Model B User Manual

Model: PI4B-4GB Display Kit

Bubuka

This manual provides comprehensive instructions for the setup, operation, and maintenance of your waveshare 7-inch Capacitive Touch LCD Display Kit for Raspberry Pi 4 Model B. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

Eusi pakét

Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:

Contents of the Waveshare Display Kit

Image: All components included in the waveshare 7-inch Display Kit, including the LCD, Raspberry Pi 4, cables, power adapter, acrylic case parts, and a microSD card with reader.

Parentah Setup

Follow these steps to assemble and set up your display kit:

  1. Prepare the Raspberry Pi: Insert the provided MicroSD card into the Raspberry Pi 4 Model B.
  2. Mount the Raspberry Pi: Secure the Raspberry Pi 4 to the back of the 7-inch LCD display using the provided standoffs and screws. Ensure proper alignment with the display's connectors.
  3. Sambungkeun kabel tampilan:
    • Connect one end of the Micro HDMI cable to the Raspberry Pi's Micro HDMI port and the other end to the display's HDMI input.
    • Connect the USB-A to Micro USB cable from a USB 2.0 port on the Raspberry Pi to the Micro USB port on the display. This provides power for the display's backlight and enables touch functionality.
  4. Assemble the Acrylic Case: Carefully attach the acrylic case components around the assembled display and Raspberry Pi. Refer to the case assembly diagram for correct orientation.
  5. Sambungkeun Kakuatan: Plug the USB power adapter into a wall outlet and connect the USB-A to USB-C cable to the Raspberry Pi's USB-C power input.
  6. Boot Awal: The system should power on automatically. The display will show the boot sequence.
Assembled Waveshare Display Kit with Raspberry Pi

Image: The fully assembled waveshare 7-inch Display Kit, showing the Raspberry Pi 4 mounted behind the screen, connected with cables, and powered by an adapter.

Operasi

Once the display kit is powered on, the pre-installed operating system (typically Raspbian) will boot. You can interact with the system using the capacitive touch screen.

Capacitive Touch Screen in Use

Image: A hand interacting with the capacitive touch screen, demonstrating its functionality with a graphical user interface.

Sistem Operasi anu Dirojong

The waveshare 7-inch Display Kit is compatible with various operating systems for the Raspberry Pi 4 Model B:

Supported Operating Systems and Display Angles

Image: Visual representation of the display showing different viewing angles and indicating support for various operating systems like Raspbian, Ubuntu, Kali, and Windows 10 IoT.

Fitur konci

Raspberry Pi 4 Model B Board Layout and Features

Image: Detailed diagram of the Raspberry Pi 4 Model B board, highlighting its processor, RAM, various ports (USB, HDMI, Ethernet, GPIO), and wireless capabilities.

Pangropéa

Pamérésan masalah

Henteu aya kaluaran tampilan:
  • Ensure the Micro HDMI cable is securely connected to both the Raspberry Pi and the display.
  • Verify the Raspberry Pi is receiving power (check the power LED on the Pi).
  • Confirm the MicroSD card is properly inserted and contains a valid operating system image.
Touch screen not responding:
  • Check that the USB-A to Micro USB cable is connected from the Raspberry Pi to the display.
  • Ensure the operating system supports touch functionality and that necessary drivers (if any, though typically driver-free for supported OS) are loaded.
  • Restart the Raspberry Pi.
Sistem henteu boot:
  • Confirm the power supply is adequate (5V/3A recommended for Raspberry Pi 4).
  • Re-flash the operating system image onto the MicroSD card.
  • Pariksa sambungan leupas atawa komponén ruksak.

Spésifikasi teknis

Ukuran tampilan7 inci
Resolusi1024 x 600
Tipe PanelIPS
Toél TipeCapacitive (5-point with Raspbian, 1-point with others)
ProsesorBroadcom BCM2711B0, Quad-core 64-bit SoC
Ram4 GB LPDDR4
Panyimpenan16 GB MicroSD Card (included)
Konéktipitas Wireless2.4/5GHz Wi-Fi, Bluetooth 5.0
Konektipitas kabelGigabit Ethernet
Kaluaran Video2x Micro HDMI (up to 4Kp60)
Kaluaran Audio4-pole stereo audio jack
palabuhan USB2x USB 3.0, 2x USB 2.0
Input kakuatanUSB-C 5V / 3A
Dimensi (Pakét)9.06 x 6.69 x 2.76 inci
Item Beurat1.43 pon
Display Dimensions and Stand Angles

Image: Technical drawing showing the dimensions of the 7-inch display in millimeters and illustrating the two available stand angles (45° and 60°) for the acrylic case.

Garansi sareng Rojongan

For warranty information and technical support, please refer to the official waveshare websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.

Sumberdaya Online: For additional documentation, tutorials, and community support, visit the waveshare official websitus.

Dokumén Patali - PI4B-4GB Display Kit

Praview Manual Pangguna LCD HDMI (C) Waveshare 7 inci: Panduan Persiapan sareng Panggunaan
Buku pituduh ieu nungtun pangguna dina setelan sareng operasi layar LCD HDMI (C) Waveshare 7 inci, ngajelaskeun spésifikasina, metode sambungan pikeun Raspberry Pi sareng PC, sareng tip panggunaan penting pikeun kinerja anu optimal.
Praview Layar LCD DSI Waveshare 4 inci pikeun Raspberry Pi: Setelan sareng Pituduh
Pituduh lengkep pikeun layar LCD DSI Waveshare 4 inci, anu ngawengku fitur-fiturna, sambungan perangkat keras, pamasangan perangkat lunak, rotasi layar, kontrol lampu latar, sareng ngungkulan masalah pikeun Raspberry Pi.
Praview Layar LCD IPS Bunder Waveshare 5 inci 1080x1080 - Pituduh Pangguna
Jelajahi layar LCD IPS buleud Waveshare 5 inci 1080x1080. Pituduh ieu ngajelaskeun fitur, spésifikasi, sareng setelan pikeun PC Raspberry Pi sareng Windows, kalebet kalibrasi toél sareng konéktivitas.
Praview Manual Pangguna LCD HDMI (G) Waveshare 10.1 inci: Setelan, Spesifikasi, sareng Konéksi
Jelajahi Waveshare 10.1 inci HDMI LCD (G) sareng Casing. Manual pangguna ieu ngawengku spésifikasi penting, peringatan kaamanan, pituduh sambungan pikeun Raspberry Pi, Jetson Nano, sareng PC, sareng ngajawab patarosan umum.
Praview Layar LCD Toél Kapasitif Waveshare 9.3 inci 1600x600 - Spésifikasi sareng Pituduh Pangguna
Pituduh lengkep pikeun layar LCD toél kapasitif résolusi luhur Waveshare 9.3 inci 1600x600. Fitur, spésifikasi, parameter listrik, setélan EDID, sareng pitunjuk setelan lengkep pikeun kompatibilitas Raspberry Pi sareng PC.
Praview Manual Pangguna LCD RPi Waveshare 3.5 inci (A): Setelan sareng Spésifikasi
Buku pituduh lengkep pikeun modul tampilan LCD (A) RPi Waveshare 3.5 inci. Ngawengku spésifikasi, pamasangan, sambungan ka Raspberry Pi, sareng ngungkulan masalah.