THERMOS 12oz Stainless Steel Direct Drink Bottle Instruction Manual

Bubuka

The THERMOS 12oz Stainless Steel Direct Drink Bottle is designed for convenient beverage transport and temperature retention. Utilizing THERMOS vacuum insulation technology, this bottle keeps beverages hot for up to 9 hours or cold for up to 18 hours. Its design includes a push-button lid with a locking ring for secure closure and a smooth-flow drinking spout for comfortable use. The bottle is also designed for easy cleaning, with dishwasher-safe components and a lid that disassembles for thorough washing.

Figure 1: THERMOS 12oz Stainless Steel Direct Drink Bottle (Stainless)

Fitur

• Téhnologi Insulasi Vakum THERMOS: Provides maximum temperature retention for hot or cold beverages.
• Konstruksi stainless steel awét: Ngajamin umur panjang sareng tahan korosi.
• Sweat-Proof Exterior: Prevents condensation from forming on the outside of the bottle.
• Push Button Lid with Locking Ring: Securely seals the bottle to prevent spills and leaks.
• Smooth Flow Lid: Designed for comfortable and controlled drinking.
• Cup Holder Compatible: Fits most standard automobile cup holders for convenience on the go.
• Dishwasher Aman: For easy and hygienic cleaning.
• Disassemblable Lid Components: Allows for thorough cleaning of all lid parts.

Setup jeung pamakéan munggaran

1. Ngabongkar: Remove all packaging materials and labels from the bottle.
2. Bersihan awal: Before first use, wash all parts of the bottle and lid thoroughly with warm, soapy water. Rinse completely.
3. Majelis tutup: Ensure all lid components are correctly assembled after cleaning. The smooth flow spout should be securely in place.
4. ngeusian: Fill the bottle with your desired beverage. Do not overfill; leave space for the lid.
5. Tutup Aman: Screw the lid on tightly to ensure a leak-proof seal. Engage the locking ring to prevent accidental opening.

Parentah Operasi

Muka tutupna

1. Buka konci: Slide the locking ring (typically a small lever or button) to the unlocked position.
2. Pencét Tombol: Press the push button on the lid. The lid will spring open, revealing the drinking spout.

Figure 2: Lid in open position, ready for drinking.

Nginum

Once the lid is open, you can drink directly from the smooth-flow spout. The design helps control the flow of liquid for comfortable sipping.

Nutup Udung

1. Tutup Tutup: Push the lid down firmly until it clicks shut.
2. Konci: Slide the locking ring back to the locked position to prevent accidental opening and ensure a secure seal.

Ingetan suhu

• Ngajaga inuman panas nepi ka 9 jam.
• Ngajaga inuman tiis nepi ka 18 jam.
• For best results with hot beverages, pre-heat the bottle with hot water for 5-10 minutes before filling.
• For best results with cold beverages, pre-chill the bottle with cold water for 5-10 minutes before filling.

Pangropéa jeung beberesih

Regular cleaning is essential to maintain hygiene and the performance of your THERMOS bottle.

Dishwasher beberesih

• The bottle and lid components are dishwasher safe (top rack recommended).
• For thorough cleaning, disassemble the lid before placing it in the dishwasher.

Ngabersihan Manual

1. Disassemble Lid: To disassemble the lid, press the tab set on the upper inside of the lid and press the drink spout down to remove the inside piece. Carefully separate all removable parts.
2. nyeuseuh: Wash all parts with warm water and a mild dish soap. Use a bottle brush for the interior of the bottle and a small brush for intricate lid parts.
3. Bilas: Bilas sadaya komponén sacara saksama ku cai bersih.
4. garing: Keun sadaya bagian dugi ka garing sadayana sateuacan dipasang deui pikeun nyegah bau atanapi jamur.
5. Pasang deui: Carefully reassemble the lid components, ensuring all seals are properly seated.

Figure 3: Disassembled lid components for cleaning.

Pamérésan masalah

• Retensi Suhu Lemah:
  • Ensure the lid is securely closed and the locking ring is engaged.
  • Verify that the lid components are correctly assembled and the silicone gasket is properly seated.
  • Pre-heat or pre-chill the bottle as recommended in the Operating Instructions.
• Bocor:
  • Check that the lid is screwed on tightly and the locking ring is engaged.
  • Inspect the silicone gasket and other lid components for any damage or misalignment. Replace if necessary.
  • Ensure the bottle is not overfilled.
• Difficulty Opening/Closing Lid:
  • Ensure the locking ring is fully disengaged before attempting to open the lid.
  • Clean the lid components thoroughly to remove any residue that might be causing sticking.

spésifikasi

Garansi sareng Rojongan

For detailed warranty information and customer support, please refer to the official THERMOS websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun salaku bukti pameseran.

Pabrikan: Termos