SAMOTECH SM309-S Zigbee Dimmer Instruction Manual

1. Bubuka

This manual provides comprehensive instructions for the installation, setup, and operation of the SAMOTECH SM309-S Zigbee Dimmer. This device is designed to integrate seamlessly into your smart home ecosystem, offering advanced lighting control capabilities.

2. Émbaran Kasalametan

• Pamasangan ngan ukur kedah dilakukeun ku tukang listrik anu mumpuni.
• Pastikeun kakuatan dipegatkeun dina breaker circuit saméméh instalasi atawa perawatan.
• Ulah ngaleuwihan peringkat beban maksimum anu ditangtukeun dina bagian spésifikasi.
• Alat ieu kanggo dianggo di jero rohangan wungkul.
• Beroperasi dina vol anu ditangtukeuntagrentang e (100-240VAC).

3. Fitur Produk

• New model based on the latest Zigbee 3.0 protocol.
• Compatible with Philips Hue, Homekit, Echo Plus, Hubitat, Home Assistant (ZHA, deConz, Conbee, Raspbee), and other universal Zigbee gateways.
• Requires a neutral wire for operation.
• Supports 100-240VAC wide input and output voltage.
• Supports resistive, capacitive, or inductive loads.
• Requires a retractive switch (push button) to operate.
• Single channel output, up to 400W.
• Innovative minimum dimming level and startup brightness setting function.
• Input and Output with Screw Terminals for safe and reliable connections.
• Can directly pair to a compatible Zigbee remote via Touchlink without a coordinator.
• Supports Zigbee green power and can bind a maximum of 20 Zigbee green power remotes.
• Supports self-forming Zigbee network without a coordinator and can add other devices to the network.

4. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• 1 x SAMOTECH SM309-S Zigbee Dimmer Module
• 1 x Manual Instruksi (Dokumén ieu)

5. Spésifikasi

Gambar 1: Hareupeun view of the SAMOTECH SM309-S Zigbee Dimmer Module, showing terminals and reset button.

6. Pamasangan

6.1 Diagram Wiring

penting: Ensure power is OFF at the circuit breaker before proceeding with any wiring.

Figure 2: Basic wiring diagram for connecting the SM309-S module to a dimmable LED light. This setup shows the neutral (N) and live (L) connections from the mains, and the output (L, N) to the dimmable light.

Figure 3: Wiring diagram illustrating the connection of the SM309-S module with an external push-button switch and a dimmable LED light. The push button connects to the 'PUSH' terminals (A1-A2) for manual control.

6.2 Léngkah-léngkah Instalasi

1. Pareuman catu daya utama dina pemutus sirkuit.
2. Connect the Live (L) and Neutral (N) wires from your mains supply to the corresponding 'L' and 'N' input terminals on the SM309-S module.
3. Connect the Live (L) and Neutral (N) wires of your dimmable light fixture to the 'L' and 'N' output terminals on the SM309-S module.
4. If using an external push-button switch, connect the switch to the 'A1' and 'A2' terminals. This allows for local manual control.
5. Securely place the module within a suitable electrical box or enclosure, ensuring proper ventilation and adherence to local electrical codes.
6. Balikkeun kakuatan dina circuit breaker.

7. Setup jeung papasangan

7.1 Pairing with a Zigbee Gateway (e.g., Philips Hue, Home Assistant)

1. Ensure your Zigbee gateway is in pairing mode. Refer to your gateway's specific instructions for this step.
2. Power on the SM309-S module.
3. Press and hold the 'Reset' button on the SM309-S module for approximately 5 seconds until the connected light blinks, indicating it's in pairing mode.
4. The module should appear in your gateway's device list. Follow the on-screen prompts to complete the pairing process.
5. Once paired, you can control the dimmer via your smart home app.

Figure 4: Screenshot of the Philips Hue app displaying the SM309-S module recognized as a "Hue white light" with model "SM309".

Figure 5: Screenshot of a smart home app (likely Amazon Alexa) showing brightness control for a connected light, indicating successful integration.

7.2 Touchlink Pairing with a Zigbee Remote

The SM309-S supports Touchlink pairing with compatible Zigbee remotes without needing a central coordinator.

1. Bring the Zigbee remote close to the SM309-S module (within 10 cm).
2. Initiate Touchlink pairing on your Zigbee remote (refer to the remote's manual for specific instructions).
3. The connected light will blink to confirm successful pairing.

7.3 Setting Minimum Dimming Level and Startup Brightness

The SM309-S allows for customization of dimming behavior:

• Minimum Dimming Level: Press and hold the 'Min.Set' button until the light reaches your desired minimum brightness. Release the button to set. This prevents flickering at very low levels.
• Caang ngamimitian: The module will typically remember the last brightness setting. Some gateways may offer options to set a default startup brightness.

8. Parentah Operasi

8.1 Manual Control (via Push Button)

• Pencét pondok: Toggle the light ON/OFF.
• Pencét Panjang: Dim the light up or down. Release and press again to reverse dimming direction.

8.2 Smart Control (via Zigbee Gateway/App)

Once paired with a compatible Zigbee gateway, you can control the dimmer using its associated mobile application or voice commands (if integrated with a voice assistant like Alexa or Google Assistant).

• Turn lights ON/OFF.
• Adjust brightness levels from 0-100%.
• Include in scenes, routines, and automations within your smart home system.

9. Pangropéa

• The SM309-S module requires no routine maintenance.
• To clean the device, ensure power is off and wipe with a dry, soft cloth. Do not use liquid cleaners.
• Periodically check wiring connections for tightness, especially after initial installation.

10. Cara ngungkulan

11. Garansi jeung Rojongan

SAMOTECH products are designed for reliability and performance. For warranty information and technical support, please refer to the official SAMOTECH websitus atanapi ngahubungan distributor lokal Anjeun. Simpen resi pameseran anjeun pikeun klaim jaminan.

Pikeun pitulung salajengna, mangga buka: www.samotech.co.uk