LoraTap Smart Roller Shutter Switch with RF Remote and Wi-Fi Control Instruction Manual

1. Bubuka

Thank you for choosing the LoraTap Smart Roller Shutter Switch. This device allows you to control your motorized roller shutters, blinds, or curtains via Wi-Fi using a smartphone application, an RF remote control, or voice commands through smart assistants like Amazon Alexa and Google Home. It also features a programmable timer function for automated operation. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Émbaran Kasalametan

• Pamasangan listrik: Pamasangan ngan kedah dilakukeun ku tukang listrik anu mumpuni atanapi jalmi anu ngartos pisan ngeunaan kabel listrik.
• Pegatkeun daya: Always disconnect power at the circuit breaker before performing any electrical work.
• Voltage: Pastikeun vol operasitage of your motor matches the switch's specifications (240 Volts).
• Kasaluyuan motor: This switch is compatible only with 4-wire motors (Live, Neutral, Up, Down). A neutral wire is required for operation.
• Kapasitas beban: Ulah ngaleuwihan kapasitas beban maksimum 600 Watts.
• Pamakéan jero rohangan wungkul: Alat ieu dirancang pikeun dianggo di jero rohangan dina lingkungan garing.

3. Eusi Paket

• LoraTap Smart Roller Shutter Switch (Model HU-XI-179)
• RF Remote Control (battery included)
• Pamasangan screws
• Terminal Blok
• Manual pamaké

4. Spésifikasi

5. Setélan

5.1. Electrical Installation and Wiring

penting: Ensure power is disconnected at the main circuit breaker before starting any wiring. This switch requires a neutral wire for operation.

Gambar 5.1: Diagram Kabel
Follow this wiring diagram carefully for correct installation. The switch requires connection to a 4-wire motor (Live, Neutral, Up, Down).

Figure 5.2: Motor Compatibility Note
This switch is compatible only with motors that have 4 wires (Live, Neutral, Up, Down). A neutral wire is essential for operation. Maximum load capacity is 600W.

1. Pareuman catu daya utama dina pemutus sirkuit anjeun.
2. Remove your existing switch (if any).
3. Connect the wires to the LoraTap switch according to the wiring diagram (Figure 5.1):
   • L (Input Live): Connect to your household live wire.
   • N (Input Neutral): Connect to your household neutral wire.
   • L1 (Output Up): Connect to the motor's 'Up' wire.
   • L2 (Output Down): Connect to the motor's 'Down' wire.
   • N (Output Neutral): Connect to the motor's neutral wire.
4. Mount the switch securely into the wall box.
5. Balikkeun kakuatan dina circuit breaker.

5.2. Wi-Fi Network Requirements

The LoraTap Smart Roller Shutter Switch operates on a 2.4GHz Wi-Fi network. It is not compatible with 5GHz Wi-Fi networks or combined 2.4GHz/5GHz networks unless your router allows for separate 2.4GHz configuration.

Figure 5.3: Wi-Fi Signal Range
For optimal Wi-Fi performance, ensure the switch is installed within 10 meters of your 2.4GHz Wi-Fi router.

5.3. App Pairing (Smart Life / Tuya App)

To enable smart control features, you need to pair the switch with the Smart Life or Tuya app.

Figure 5.4: Easy Pairing Process
Follow these steps to pair your switch with the Smart Life or Tuya app.

1. Download the "Smart Life" or "Tuya Smart" app from the App Store (iOS) or Google Play Store (Android).
2. Daptar atanapi lebet kana akun anjeun.
3. Pastikeun smartphone Anjeun disambungkeun ka jaringan Wi-Fi 2.4GHz.
4. On the app's home screen, tap the "+" icon (or "Add Device").
5. Select "Curtain Switch" or similar device type from the list.
6. Follow the in-app instructions to put the switch into pairing mode (usually by pressing and holding a button on the switch until an indicator light flashes rapidly).
7. Confirm the indicator light is flashing rapidly in the app.
8. Lebetkeun kecap akses jaringan Wi-Fi 2.4GHz anjeun.
9. Wait for the device to connect. Once successfully added, you can rename the device.

6. Parentah Operasi

6.1. Kontrol Toél Manual

The switch features a responsive touch panel for direct control.

Figure 6.1: Touch Panel and RF Remote Control
Operate the switch using the responsive touch panel directly or via the included RF remote control.

• Panah Naék: Touch to open the roller shutter.
• Panah Turun: Touch to close the roller shutter.
• Tombol Reureuh: Touch to stop the roller shutter at its current position.

6.2. Kadali Jarak Jauh RF

The included RF remote control provides convenient wireless operation.

Figure 6.2: Remote Compatibility and Dimensions
The RF remote is compatible only with LoraTap switches featuring the 'RF+Wi-Fi' marking. Dimensions of the switch and remote are provided for installation planning.

• The remote is typically pre-paired with the switch. If not, refer to the pairing instructions in the remote's separate manual or contact support.
• Use the Up, Down, and Pause buttons on the remote to control the roller shutter.

6.3. App Control (Smart Life / Tuya App)

After successful pairing, you can control your roller shutters from anywhere using the app.

Figure 6.3: Remote Control via App
Control your roller shutters remotely from anywhere using the Smart Life or Tuya application on your smartphone.

• Open the Smart Life or Tuya app and select your roller shutter switch.
• Use the virtual buttons to open, close, or pause the roller shutter.
• Partial Opening/Closing: The updated switch allows you to set the motor's running time in the app to achieve partial opening or closing (e.g., 30% or 50%). Adjust this setting in the device's control interface within the app.

6.4. Kontrol Sora (Alexa / Google Home)

Integrate your switch with Amazon Alexa or Google Home for hands-free control.

angka 6.4: Pamaduan Control Sora
Integrate with Amazon Alexa or Google Home for convenient voice control of your roller shutters.

1. In the Smart Life/Tuya app, go to the device settings and link your Amazon Alexa or Google Home account.
2. Panggihan alat anyar dina aplikasi Alexa atanapi Google Home anjeun.
3. Anggo paréntah sora sapertos:
   "Alexa, open [Device Name]"
   "Hey Google, close [Device Name]"
   "Alexa, stop [Device Name]"

6.5. Fungsi Timer

Automate your roller shutters by setting schedules in the app.

Figure 6.5: Timer Function Setup
Set custom schedules and timers through the app to automatically open or close your roller shutters at specific times.

• In the Smart Life/Tuya app, select your device and navigate to the "Schedule" or "Timer" section.
• Add new schedules, specifying the time, action (open/close), and repetition days.

7. Pangropéa

• beberesih: Wipe the glass panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Sambungan: Pariksa sacara berkala sambungan listrik pikeun pageuh, khususna saatos dipasang awal.
• Pembaruan firmware: Keep the Smart Life/Tuya app updated to receive the latest features and security patches for your device.
• Batré jauh: Replace the remote control battery (Type C Lithium metal) when its performance degrades.

8. Cara ngungkulan

• Switch Teu Ngabales:
  • Pariksa lamun catu daya utama hurung.
  • Pariksa sadaya sambungan kabel aman sareng leres numutkeun diagram.
  • Ensure the motor is a 4-wire type and a neutral wire is connected.
• Masalah Sambungan Wi-Fi:
  • Confirm your Wi-Fi network is 2.4GHz. The switch does not support 5GHz.
  • Ensure the switch is within 10 meters of your Wi-Fi router.
  • Check your Wi-Fi password for accuracy during pairing.
  • Try restarting your Wi-Fi router and the switch.
  • If pairing fails, try resetting the switch (refer to app instructions for specific reset procedure, usually holding a button for several seconds until indicator flashes differently).
• Jarak Jauh RF Teu Jalan:
  • Pariksa batré kadali jauh jeung ngaganti lamun perlu.
  • Ensure the switch has the "RF+Wi-Fi" marking for compatibility.
  • If the remote was previously working, it might need re-pairing. Refer to the remote's manual for pairing instructions.
• Kontrol Sora Teu Gawé:
  • Verify that the Smart Life/Tuya account is correctly linked to your Alexa or Google Home account.
  • Ensure the device is discovered and enabled in your smart assistant app.
  • Anggo nami alat anu sami sareng anu dikonfigurasi dina aplikasi Smart Life/Tuya.

9. Garansi jeung Rojongan

The LoraTap Smart Roller Shutter Switch comes with a garansi 3 taun ti tanggal pameseran. Garansi ieu ngawengku cacad manufaktur sareng mastikeun produk bébas tina cacad dina bahan sareng padamelan dina panggunaan normal.

For technical support, troubleshooting assistance, or warranty claims, please contact LoraTap customer service through the retailer where you purchased the product or visit the official LoraTap websitus pikeun inpo kontak.

Sertifikasi: This product is CE and RoHS certified, ensuring compliance with European safety, health, and environmental protection requirements.