Bissell Pet Stain Eraser Cordless Portable Carpet Cleaner, Model 20037 - Instruction Manual

Produk Leuwihview

The Bissell Pet Stain Eraser Cordless Portable Carpet Cleaner, Model 20037, is designed for convenient and effective removal of pet stains and messes from various surfaces. Its cordless design allows for easy use on carpets, upholstery, stairs, area rugs, and auto interiors. The device utilizes a spray, scrub, and suction method to clean, and comes with a ready-to-use formula for instant and permanent stain removal.

Parentah Setup

1. Ngecas Alat: Before first use, fully charge the unit. The device requires 1 Lithium Ion battery (included) and has a charge time of approximately 4 hours. The charging port is typically located on the handle.
2. Filling the Solution Tank: The cleaner uses a ready-to-use formula that does not require mixing with water. Locate the solution tank, typically a removable compartment on the unit. Open the cap and fill the tank with the appropriate Bissell cleaning formula up to the indicated fill line. Securely close the cap and reinsert the tank into the device.

Parentah Operasi

1. Daya Hurung: Press and hold the power button to turn on the device. The power indicator lights will illuminate.
2. Applying Solution: Position the nozzle over the stained area. Press the spray button to dispense the cleaning solution onto the stain. Allow the solution to penetrate the stain for a few moments as recommended by the formula instructions.
3. Scrubbing and Suction: Gently scrub the stained area with the built-in brush on the nozzle. While scrubbing, apply downward pressure and slowly pull the device across the stain to suction up the dirty solution. Repeat this process until the stain is removed and the area is as dry as possible. The transparent nozzle allows you to see the dirty water being extracted.
4. Wewengkon Sasaran: This portable cleaner is effective on various surfaces including carpets, upholstery, stairs, area rugs, and auto interiors.

Pangropéa

1. Ngosongkeun Tangki Cai Kotor: After each use, or when the dirty water tank reaches its 'Full' line, remove it from the device. Open the designated spout and empty the dirty water.
2. Cleaning the Nozzle and Brush: The transparent nozzle and brush can accumulate dirt and debris. Detach the nozzle and rinse it thoroughly under running water. The brush can also be removed for separate cleaning if necessary. Ensure all components are clean before reassembling.
3. Pangeringan hawa: Allow all tanks and removable parts to air dry completely before reassembling the unit and storing it.

Pamérésan masalah

• No Suction or Leaking: Ensure all tanks and removable parts, especially the nozzle, are correctly and securely attached. A loose component can lead to reduced suction or leaks.
• Ngurangan Umur Batré: Ensure the device is fully charged for the recommended 4 hours. Battery performance can decrease over time with prolonged use.
• Kinerja beberesih goréng: Check if the solution tank is filled correctly and the nozzle/brush are free from obstructions. For stubborn stains, pre-treat the area before using the cleaner.

spésifikasi

Garansi sareng Rojongan

For specific warranty information, product registration, or technical support, please refer to the documentation included with your product or visit the official Bissell website. Contacting Bissell customer service directly can provide the most accurate and up-to-date support details.