Buku Panduan Pangguna Mixer DJ Numark Scratch sareng SoundSwitch DMX Micro Interface

Bubuka

This manual provides essential information for the setup, operation, and maintenance of your Numark Scratch 2-channel DJ Mixer and the included SoundSwitch DMX Micro Interface. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your experience.

Eusi pakét

• Numark Scratch DJ Mixer
• SoundSwitch DMX Micro Interface
• Kabel USB
• Adaptor kakuatan
• Software Download Cards (Serato DJ Pro, SoundSwitch)
• Manual pangguna (dokumén ieu)
• Manual Kasalametan & Garansi

Image: The Numark Scratch DJ Mixer shown alongside the SoundSwitch DMX Micro Interface and a DMX cable, representing the complete package contents.

Disetél

Follow these steps to set up your Numark Scratch mixer and SoundSwitch DMX Micro Interface.

1. Sambungan Daya: Connect the included power adapter to the Numark Scratch mixer and then to a power outlet.
2. USB Connection (Mixer): Connect the Numark Scratch mixer to your computer using a USB cable. This connection enables control of Serato DJ Pro and audio routing.
3. Input audio: Connect your turntables or media players to the LINE/PHONO inputs on the rear panel. Ensure the PHONO/LINE switch for each channel is set correctly according to your source.
4. Kaluaran Audio: Connect the MASTER output (XLR or RCA) to your sound system. Connect the BOOTH output (RCA) to your booth monitors if applicable.
5. Input mikropon: If using a microphone, connect it to the MIC input on the front panel.
6. Headphone: Connect your headphones to the 1/4" or 1/8" headphone jacks on the front panel.
7. SoundSwitch DMX Micro Interface Connection: Connect the SoundSwitch DMX Micro Interface to an available USB port on your computer.
8. DMX Lighting Connection: Connect a standard DMX cable from the SoundSwitch DMX Micro Interface to your DMX-compatible lighting fixtures.
9. Pamasangan parangkat lunak: Install Serato DJ Pro and SoundSwitch software on your computer. Follow the instructions provided with your software download cards.

Gambar: Hiji sudut view of the Numark Scratch DJ Mixer, illustrating its overall design and various connection points on the rear and top panels.

Parentah Operasi

Numark Scratch Mixer Controls

Gambar: Detil close-up view of the Numark Scratch mixer's top panel, highlighting the various knobs, faders, performance pads, and effect controls.

• Gain Knobs: Saluyukeun tingkat input pikeun unggal saluran.
• EQ Knobs (Treble, Mid, Bass): Control the high, mid, and low frequencies for each channel.
• Filter Knobs: Apply high-pass or low-pass filters to each channel.
• Saluran Faders: Control the volume of each channel.
• InnoFader Crossfader: The central fader for blending between channels. Features reverse and slope controls for customization.
  • Saklar Balik: Flips the crossfader's left/right assignment.
  • Kontrol Lamping: Adjusts the crossfader's curve from a smooth blend to a sharp cut.
• FX Select Buttons: Choose from 6 direct access effects (Echo, Delay, Flanger, Reverb, V. Echo, Phaser).
• Paddle Launch Triggers: Activate and hold selected effects.
• Dry/Wet FX Control: Adjust the intensity of the applied effect.
• Loop Knobs: Create instant loops of various lengths.
• Bantalan Kinerja: Access cue points, rolls, and samples within Serato DJ Pro. Use the Modeu Pad button to cycle through different functions.
• Jilid Master: Controls the overall output level to your main sound system.
• Volume Booth: Controls the output level to your booth monitors.
• Headphone Cue/Mix: Adjusts the balance between the cued channel and the master output in your headphones.
• Keuntungan Headphone: Adjusts the overall volume of your headphones.

SoundSwitch DMX Micro Interface Operation

The SoundSwitch DMX Micro Interface integrates with Serato DJ Pro to synchronize lighting effects with your music.

Image: The Numark Scratch mixer displayed with 'SoundSwitch Ready' text, emphasizing its compatibility and seamless integration with the SoundSwitch lighting software.

• Integrasi Software: Once connected and SoundSwitch software is running, the interface will automatically detect and control your DMX lighting fixtures.
• Pencahayaan otomatis: SoundSwitch can analyze your music and generate automated lighting scenes.
• Custom Lighting Displays: Use the SoundSwitch software to design and program custom lighting sequences that respond to your DJ performance.
• Indikator LED biru: The blue LED on the interface indicates a successful connection and data transmission.

Pangropéa

Proper maintenance ensures the longevity and optimal performance of your equipment.

• beberesih: Use a soft, dry cloth to clean the exterior of the mixer and interface. Avoid abrasive cleaners or solvents.
• Perlindungan lebu: Keep the unit covered when not in use to prevent dust accumulation.
• Manajemén Kabel: Pastikeun sadaya kabel disusun rapih sareng henteu kakeunaan tegangan supados henteu ruksak.
• Panyimpenan: Simpen unit dina tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Crossfader Maintenance: The InnoFader is designed for durability. If cleaning is required, consult a qualified technician or refer to specific InnoFader maintenance guidelines.

Pamérésan masalah

Upami anjeun mendakan masalah, tingal solusi umum ieu:

spésifikasi

Émbaran jaminan

Numark products are designed for reliability and performance. This product is covered by a limited warranty. For detailed warranty terms and conditions, please refer to the separate Warranty and Safety Manual included with your product or visit the official Numark websitus.

penting: Keep your proof of purchase. It will be required for any warranty service.

Ngarojong

For technical support, product registration, or to download the latest software and drivers, please visit the official Numark support websitus:

www.numark.com/support

You can also find frequently asked questions (FAQs) and community forums on the support page.