Parentah Kasalametan penting
Please read and understand all instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- PERHATOSAN: To avoid electric shock, always unplug the lamp from the power outlet before cleaning or changing the bulb.
- Do not use with a damaged cord or plug. If the cord or plug is damaged, discontinue use immediately and contact customer service.
- Ulah neuleumkeun lamp in water or any other liquid. This product is not waterproof.
- Pastikeun bohlam wattage does not exceed the maximum specified (60W). Using a higher wattage bulb can cause overheating and fire.
- This product is designed for indoor use only. Do not use outdoors or in wet locations.
- Jauhkeun tina bahan anu gampang kaduruk.
Eusi pakét
Pastikeun yén sadaya komponén aya sareng henteu ruksak:
- Feit Electric Gray Industrial Style Table Cube Lamp Dasar (1)
- Note: Bulb is not included and must be purchased separately.
Image: The Feit Electric CUBE1 Industrial Style Table Lamp Base shown in its retail packaging. The packaging highlights "Vintage Industrial Style" and "e26 MEDIUM BASE", indicating the bulb type.
Setup sareng Instalasi
Follow these steps to set up your new lamp dasar:
- Buka bungkus Lamp Dasar: Taliti miceun lamp base from its packaging and place it on a clean, stable surface.
- Pilih bohlam: Choose an E26 (medium) base bulb (not included) with a maximum wattage of 60W. For optimal performance and energy savings, an LED bulb is recommended.
- Pasang bohlam: Pastikeun lamp is unplugged. Gently screw the chosen bulb clockwise into the lamp socket until it is snug. Do not overtighten, as this can damage the socket or the bulb.
- Posisi Lamp: Teundeun lamp base on a stable, flat, and dry surface indoors, away from direct sunlight or heat sources.
- Nyambung ka Daya: Colokkeun lamp's power cord into a standard 120V AC electrical outlet. Ensure the plug is fully inserted.
Image: The Feit Electric CUBE1 lamp base with an Edison-style LED bulb already installed, demonstrating the appearance once assembled and ready for use.
Parentah Operasi
The Feit Electric CUBE1 lamp base features a convenient in-line mechanical on/off switch for simple operation.
- Ngahurungkeun: Locate the mechanical switch on the power cord. Press the switch to the "ON" position to illuminate the bulb.
- Pareuman: Press the switch to the "OFF" position to turn off the bulb.
Gambar: A close-up view of the black in-line mechanical on/off switch located on the braided electrical cord of the lamp, used for controlling power.
Pangropéa
Perawatan anu leres bakal mastikeun umur panjang anjeunamp dasar.
- beberesih: Sok cabut colokan lamp from the power outlet before cleaning. Wipe the lamp base with a soft, dry, non-abrasive cloth. Do not use liquid cleaners, abrasive cleaners, or solvents, as these may damage the finish.
- Ngagantian bohlam: Pastikeun lamp is unplugged and the bulb has cooled completely before attempting to replace it. Screw out the old bulb counter-clockwise and screw in a new E26 base bulb (max 60W) clockwise.
Pamérésan masalah
Lamun sapatemon masalah sareng l Anjeunamp, tingali tabel di handap ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lamp henteu hurung. | 1. Lamp teu dicolokkeun. 2. Bohlam leupas atawa kaduruk kaluar. 3. Power outlet is not functioning. 4. In-line switch is in the "OFF" position. | 1. Ensure the power cord is securely plugged into a working electrical outlet. 2. Tighten the bulb or replace it with a new, working E26 bulb. 3. Test the outlet with another appliance or check your home's circuit breaker. 4. Press the in-line switch to the "ON" position. |
| Lamp kedip-kedip. | 1. Bohlam leupas. 2. Bulb is incompatible or faulty. 3. catu daya teu stabil. | 1. Cabut colokan lamp sarta tighten bohlam. 2. Try a different E26 bulb. 3. Colokkeun lamp kana outlet béda. |
spésifikasi
Key technical details for the Feit Electric CUBE1 Lamp Dasar:
| Fitur | Rincian |
|---|---|
| Nomer modél | KUBUS 1 |
| merek | Feit Listrik |
| Ukuran produk (D x W x H) | 5.42" x 6.98" x 4" |
| Bahan Dasar | Beton |
| Jenis Dasar Bulb | E26 (Sedeng) |
| Wat maksimumtage | 60 watt |
| Pindah Tipe | In-line Mechanical On/Off |
| Sumber Daya | Kabel Listrik |
| Lingkungan Pamakéan | Di jero rohangan wungkul |
Garansi sareng Rojongan
This Feit Electric product is backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Feit Electric websitus.
For technical assistance, troubleshooting not covered in this manual, or to inquire about warranty service, please contact Feit Electric Customer Service:
- Feit Listrik Websitus: www.feit.com
- Contact Us Page: www.feit.com/contact-us/
- Feit Electric Amazon Store: Nganjang ka Toko