1. Bubuka
Thank you for choosing the AOPUTTRIVER AP-816B Handheld Anemometer. This device is designed for accurate and real-time measurement of wind speed, temperature, and wind chill. Its compact and portable design makes it suitable for a wide range of applications, from outdoor sports to professional equipment testing.
2. Émbaran Kasalametan
- Ulah ngalaan alat ka suhu ekstrim atawa sinar panonpoé langsung pikeun période berkepanjangan.
- Hindarkeun ngaragragkeun alatna atanapi mangaruhan kana tabrakan anu kuat.
- Jauhkeun alat ieu tina cai sareng kalembaban anu luhur pikeun nyegah karusakan.
- Pastikeun pamasangan sareng pembuangan batré anu leres numutkeun peraturan lokal.
- Entong nyobian ngabongkar atanapi ngarobih alat, sabab ieu bakal ngabatalkeun garansi sareng tiasa nyababkeun karusakan.
3. Eusi Paket
Upon opening your AOPUTTRIVER AP-816B package, please verify that all items listed below are present and in good condition:
- AOPUTTRIVER AP-816B Handheld Anemometer
- CR2032 3V Battery (pre-installed or included separately)
- Lanyard
- Manual pangguna (dokumén ieu)
Image: The AP-816B Anemometer with its display showing wind speed and temperature, alongside the included lanyard and a CR2032 battery.
4. Produk Langkungview
Familiarize yourself with the components of your AP-816B Anemometer:
Image: A detailed diagram of the AP-816B Anemometer, highlighting key components such as the 7-blade fan wheel, windchill sensor, LCD display, MODE button, ℃/℉ key, and SET button.
- Fan Wheel (7 blades): Ngukur kecepatan angin.
- Windchill Sensor: Detects ambient temperature for wind chill calculation.
- Layar LCD: Shows wind speed, temperature, and other indicators. Features auto backlight for readability in low light.
- Tombol MODE: Cycles through measurement modes (MAX, AVG, CURRENT).
- ℃/℉ Key: Toggles antara unit suhu Celsius sareng Fahrenheit.
- Tombol SET: Used to select desired wind speed measurement units (m/s, Ft/min, Knots, Km/hr, Mph) and to power off the device.
- Lanyard Interface: Located at the bottom for convenient carrying.
5. Setélan
5.1 Pamasangan batré
The AP-816B Anemometer uses one CR2032 3V battery. Follow these steps to install or replace the battery:
- Teang panutup batre dina tonggong alat.
- Use a coin or a Phillips screwdriver to rotate the battery cover counter-clockwise to the 'OPEN' position.
- Carefully remove the old battery if replacing.
- Insert the new CR2032 battery with the positive (+) side facing up, aligning with the polarity indicator.
- Place the battery cover back and rotate it clockwise to the 'CLOSE' position to secure it.
Image: Visual guide demonstrating how to open the battery cover with a coin, insert the CR2032 battery, and close the cover.
5.2 Ngalampirkeun Lanyard
To prevent accidental drops and for convenient carrying, attach the included lanyard:
- Thread the thin loop of the lanyard through the lanyard interface hole at the bottom of the anemometer.
- Pass the larger end of the lanyard through the small loop you just created and pull to secure.
Video: A demonstration of how to attach the lanyard to the AP-816B Handheld Anemometer for secure handling.
6. Parentah Operasi
6.1 Daya Hurung/Pareuman
- Daya Hurung: Long press the 'MODE' button until the display lights up and the 'm/s' unit starts to flash.
- Pareum listrik: Long press the 'SET' button until the display turns off. The device also features an auto-power off function to conserve battery.
6.2 Unit Suhu Anu Robah (℃/℉)
Press the '℃/℉' key to switch between Celsius and Fahrenheit temperature displays.
6.3 Selecting Wind Speed Units
While the device is on, press the 'SET' button repeatedly to cycle through the available wind speed units: m/s, Ft/min, Knots, Km/hr, Mph. The selected unit will be displayed on the screen.
6.4 Modeu pangukuran
Press the 'MODE' button (short press) to switch between different measurement modes:
- AYEUNA: Némbongkeun laju angin sacara real-time.
- MAX: Shows the maximum wind speed recorded since power-on.
- AVG: Némbongkeun laju angin rata-rata anu kacatet saprak dihurungkeun.
Image: The anemometer's display showing various measurement indicators including MAX, AVG, current wind speed, and wind chill temperature.
6.5 Nyokot Pangukuran
Hold the anemometer so that the fan wheel faces directly into the wind. The LCD will instantly display the wind speed and temperature. If the temperature drops below 0℃ (32℉), the wind chill symbol will appear on the LCD.
Gambar: Examples of the anemometer's application, including gliding, surfing, and flying activities, demonstrating its versatility.
7. Spésifikasi
Image: A table summarizing the features and detailed specifications of the AP-816B Anemometer, including wind speed range, resolution, threshold, and accuracy for various units.
| Fitur | Katerangan |
|---|---|
| merek | AOPUTTRIVER |
| Nomer modél | AP-816B |
| Bahan | palastik |
| Ukuran barang (L x W x H) | 4.45 x 1.57 x 0.59 inci |
| Item Beurat | 2.39 ons |
| Rentang Angin Angin | 0.3~30 m/s (±5% of rdg) |
| Rentang Suhu | -10℃~45℃ (14℉~113℉) (±2℃) |
| Resolusi | 0.1 m/s; 0.2℃ |
| Jenis Batré | CR2032 3V (1pc) |
| Kalembaban Operasi | ≤90%RH |
| Suhu Panyimpenan | -40 ℃ ~ 60 ℃ (-40 ℉ ~ 140 ℉) |
| Fitur | Wind chill indication, LCD backlight, Low battery warning, Auto/Manual power off |
8. Pangropéa
- beberesih: Ngusap alat ku kaén anu lemes sareng garing. Ulah make cleaners abrasive atawa pangleyur.
- Panyimpenan: When not in use for extended periods, remove the battery to prevent leakage. Store the device in a cool, dry place.
- Fan Wheel: Ensure the fan wheel is free from obstructions (dust, debris) for accurate readings. Do not force the fan wheel to spin.
9. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Alat teu hurung | Batré lemah atanapi pareum; Pamasangan batré anu salah | Replace the battery (CR2032). Ensure correct polarity (+ side up). |
| Pamacaan kecepatan angin anu teu akurat | Fan wheel obstructed; Device not facing wind directly; Damaged sensor | Clear any debris from the fan wheel. Ensure the device is pointed directly into the wind. If problem persists, contact support. |
| Tampilanna taram atawa kedip-kedip | batré lemah | Ganti batréna. |
| No temperature reading or incorrect reading | Sensor obstruction or damage | Ensure the windchill sensor area is clear. If problem persists, contact support. |
10. Garansi jeung Rojongan
AOPUTTRIVER provides a 2-year warranty and lifetime technical support for the AP-816B Handheld Anemometer. If you encounter any product problems or require assistance, please do not hesitate to contact our customer service team. We are committed to providing professional gear at a fair cost, obsessively tested products, and world-class customer service.
For support, please visit the official AOPUTTRIVER store on Amazon or refer to the contact information provided with your purchase.
