VIVOTEK AW-GTS-287A L2 Plus Managed Switch

1. Bubuka

The VIVOTEK AW-GTS-287A is a high-performance L2 Plus Managed Switch designed for demanding network environments. It features 20x Gigabit Ethernet SFP ports, 4x Combo Gigabit Ethernet ports, and 4x 1G/10G SFP+ uplink ports, providing flexible connectivity options for enterprise networks and service providers. This switch supports advanced L2 Plus and L3 features, including Static Route, to optimize network performance and management.

2. Eusi Paket

Pariksa yén pakét anjeun ngandung barang-barang ieu:

• VIVOTEK AW-GTS-287A L2 Plus Managed Switch
• Power Cord (AC)
• Rak Gunung Kit
• Documentation (Quick Installation Guide)
• Console Cable (RJ45 to DB9)

Note: The 'Comb' item listed in some specifications typically refers to a combination of accessories or a specific type of connector, often included with networking equipment.

3. Produk Langkungview

Hareupeun view of the VIVOTEK AW-GTS-287A L2 Plus Managed Switch, showing the various SFP, Combo GE, and SFP+ ports, along with LED indicators.

The AW-GTS-287A is equipped with a robust set of features for advanced network management. It includes 20x GE SFP ports for fiber connectivity, 4x Combo GE ports (supporting either RJ45 or SFP), and 4x 1G/10G SFP+ ports for high-speed uplinks. The switch also features dual power supply units (100~240V AC and 24~72V DC) for enhanced reliability and redundant power options.

4. Setélan

4.1. Instalasi fisik

1. Pamasangan rak: Securely attach the provided rack mount brackets to the sides of the switch using the included screws. Mount the switch into a standard 19-inch equipment rack.
2. Penempatan Desktop: If not rack-mounting, ensure the switch is placed on a stable, flat surface with adequate ventilation around all sides.

4.2. Sambungan Daya

The AW-GTS-287A supports dual power inputs for redundancy:

• Daya AC: Connect the AC power cord to the AC power inlet on the rear panel of the switch and then to a grounded AC power outlet (100~240V AC).
• Kakuatan DC: Connect a 24~72V DC power source to the DC power terminal block on the rear panel, ensuring correct polarity.

The switch will power on automatically once connected to a power source.

4.3. Sambungan jaringan

• Palabuhan SFP: Insert compatible Gigabit SFP transceivers into the 20x GE SFP ports for fiber optic connections.
• Combo GE Ports: Use either RJ45 Ethernet cables for copper connections or SFP transceivers for fiber connections in the 4x Combo GE ports. Note that only one interface (RJ45 or SFP) can be active per combo port at a time.
• Port Uplink SFP+: Insert compatible 1G or 10G SFP+ transceivers into the 4x SFP+ ports for high-speed uplink connections to core switches or servers.
• Port konsol: Connect a console cable (RJ45 to DB9) from the switch's console port to a computer for command-line interface (CLI) access and initial configuration.

5. Parentah Operasi

The VIVOTEK AW-GTS-287A is a managed switch, configurable via a web-based graphical user interface (GUI) or a command-line interface (CLI) through the console port or Telnet/SSH.

5.1. Konfigurasi awal

1. Ngaksés CLI: Connect via the console port. Use a terminal emulator (e.g., PuTTY, Tera Term) with settings: 115200 bps, 8 data bits, no parity, 1 stop bit, no flow control.
2. Ngaksés ka Web GUI: By default, the switch may have a pre-assigned IP address (refer to the Quick Installation Guide for specifics). Configure your computer's IP address to be in the same subnet, then open a web panyungsi teras lebetkeun alamat IP saklar.

5.2. Key Features and Management Functions

• L2 Plus Features: Supports Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control, IGMP/MLD snooping, GARP VLAN Registration Protocol (GVRP), and sFlow for advanced traffic management and network segmentation.
• Keunggulan L3: Includes Static Route functionality, enabling efficient routing between different IP subnets without requiring a dedicated router for simple routing needs.
• Dynamic Port Link Aggregation: Combine multiple physical ports into a single logical link to increase bandwidth and provide link redundancy. The switch supports up to 14 trunk groups, with up to 16 ports in each group.
• Kaamanan: Implement port security, access control lists (ACLs), and authentication mechanisms to protect your network.
• Ngawaskeun: Utilize SNMP, RMON, and port mirroring for network monitoring and diagnostics.

6. Pangropéa

6.1. Kaperawatan Umum

• Simpen saklar dina lingkungan anu bersih sareng bébas kekebul.
• Pastikeun ventilasi ditangtoskeun pikeun nyegah overheating. Ulah meungpeuk bukaan ventilasi.
• Bersihkeun bagian luar ku kaén anu lembut sareng garing. Entong nganggo pembersih cair atanapi aerosol.

6.2. Apdet firmware

Pariksa sacara berkala petugas VIVOTEK websitus pikeun apdet firmware. Apdet firmware tiasa nyayogikeun fitur énggal, paningkatan kinerja, sareng patch kaamanan. Turutan pitunjuk anu disayogikeun sareng pakét apdet firmware kalayan saksama.

6.3. Configuration Backup

Regularly back up the switch's configuration settings to an external device. This allows for quick restoration of settings in case of a device failure or misconfiguration.

7. Cara ngungkulan

7.1. Taya Daya

• Verify that the power cord(s) are securely connected to both the switch and the power outlet.
• Pariksa sumber kakuatan pikeun fungsionalitas.
• Ensure the power supply units are functioning correctly (check LED indicators if available).

7.2. Taya Konéktipitas Jaringan

• Check the link/activity LEDs on the connected ports. If off, verify cable connections and transceiver functionality.
• Ensure connected devices are powered on and configured correctly.
• Verify VLAN configurations and IP settings on the switch and connected devices.
• Check for any port-specific configurations (e.g., port shutdown, speed/duplex mismatch).

7.3. Unable to Access Web GUI/CLI

• Confirm the switch's IP address and ensure your management station is in the same subnet.
• Check firewall settings on your management station.
• If using CLI via console, verify console cable connection and terminal emulator settings.
• Try resetting the switch to factory defaults (refer to the Quick Installation Guide for the specific procedure, which usually involves a reset button).

8. Spésifikasi

9. Émbaran jaminan

The VIVOTEK AW-GTS-287A L2 Plus Managed Switch is sold with Taya Garansi as per the provided product specifications. Please consult your reseller or distributor for any specific return or service policies they may offer.

10. Rojongan

For technical assistance, product inquiries, or further information, please contact your authorized VIVOTEK reseller or visit the official VIVOTEK websitus pikeun sumber daya dukungan, FAQ, sareng detail kontak.