1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your KICKER car audio system. This system includes a KICKER 48DCWR122-RS Dual 12" CompR Series Subwoofer Enclosure, a KICKER 46CXA8001 Mono Amplifier, and a Harmony Audio HA-AK8 Amplifier Installation Kit. Please read this manual thoroughly before attempting installation or operation to ensure proper function and safety.
Pancegahan Kasalametan:
- Salawasna pegatkeun terminal négatif batré kandaraan sateuacan ngamimitian padamelan listrik naon waé.
- Pastikeun sadaya kabel dihubungkeun sareng diamankeun kalayan leres pikeun nyegah karusakan atanapi korsleting.
- Use appropriate personal protective equipment during installation.
- Taroskeun pamasang audio mobil profésional upami anjeun henteu yakin ngeunaan bagian mana waé tina prosés pamasangan.
2. Eusi Paket
Pastikeun yén sadaya item aya dina pakét anjeun:
- 1 x KICKER 48DCWR122-RS Dual 12" CompR Series Subwoofer Enclosure
- 1 x KICKER 46CXA8001 Car Audio Class D Mono Amppangagung
- 1 x Harmony Audio HA-AK8 Car Stereo Complete 8 Gauge AmpLifier Pasang Kit
Gambar 2.1: Hareupeun view of the KICKER Dual 12 inch CompR Subwoofer Enclosure. This image shows the two 12-inch subwoofers mounted in a black carpeted enclosure with the KICKER logo.
Gambar 2.2: Top view of the KICKER 46CXA8001 Mono Amppangangkat. The amplifier is a compact black unit with the KICKER logo and model number CXA800.1 visible.
Figure 2.3: Harmony Audio HA-AK8 8 Gauge Amplifier Installation Kit components. This image displays various cables, a fuse holder, terminals, and zip ties included in the installation kit.
3. Setup & Instalasi
Proper installation is crucial for optimal performance and safety. It is recommended to have this system installed by a qualified professional.
3.1 Subwoofer Enclosure Placement
The KICKER 48DCWR122-RS enclosure is designed for freestanding placement. Choose a secure location in your vehicle, typically the trunk or cargo area, where it will not shift during driving. Ensure adequate ventilation around the enclosure.
Gambar 3.1: Tukangeun view of the KICKER Dual 12 inch CompR Subwoofer Enclosure. This view shows the rear panel, typically where the speaker terminals are located for connection to an amppangagung.
3.2 Amplifier Installation (KICKER 46CXA8001)
Gunung nu amplifier in a location that provides good air circulation and is protected from moisture and excessive heat. Common locations include under a seat, in the trunk, or attached to the subwoofer enclosure.
3.2.1 Power Wiring (HA-AK8 Kit)
- Power Cable (+12V): Connect the 8-gauge power cable from the HA-AK8 kit to the vehicle's positive battery terminal. Install the fuse holder (included in HA-AK8 kit) as close to the battery as possible (within 18 inches) to protect the vehicle's electrical system. Route the power cable to the ampLifier urang + 12V terminal.
- Ground Cable (GND): Connect the 8-gauge ground cable from the HA-AK8 kit to a clean, unpainted metal surface on the vehicle's chassis. Ensure a solid, low-resistance connection. Connect the other end to the amplifier's GND terminal. The ground cable should be as short as possible, ideally less than 3 feet.
- Remote Turn-On Cable (REM): Connect a thin gauge wire (typically blue) from your head unit's remote output to the ampterminal REM lifier urang. Kawat ieu ngahurungkeun amplifier sareng mareuman sareng unit sirah anjeun.
3.2.2 Masukan Sinyal
The 46CXA8001 amplifier supports both high-level (speaker level) and low-level (RCA) inputs. Use the appropriate input type based on your head unit's outputs.
- Input Tingkat Rendah: If your head unit has RCA outputs, connect them to the ampjacks input RCA lifier urang.
- Input Tingkat Tinggi: If your head unit does not have RCA outputs, use the speaker-level inputs. Refer to the amplifier's specific wiring diagram for connecting speaker wires directly to the amppangagung.
3.2.3 Kaluaran Speaker
Connect the subwoofer enclosure's speaker terminals to the amplifier's SPEAKER output terminals. Ensure correct polarity (+ to + and - to -) for optimal sound. The 48DCWR122-RS enclosure is wired for a 2 Ohm load.
Figure 3.2: Connection side of the KICKER 46CXA8001 Mono Amplifier. This image shows the power (GND, REM, +12V) and speaker output terminals on one side of the amppangagung.
4. Parentah Operasi
Once the system is installed, follow these steps for initial setup and operation:
4.1 Mimiti Power-Up
- Mariksa deui sadaya sambungan kabel.
- Reconnect the vehicle's battery negative terminal.
- Hurungkeun unit sirah anjeun. The amplifier should power on (indicated by an LED).
4.2 Amplifier Settings (KICKER 46CXA8001)
The 46CXA8001 amplifier features several adjustable controls:
- Kontrol Gain: Atur gain pikeun cocog jeung voltase kaluarantage of your head unit. Start with the gain at minimum and slowly increase it until you hear distortion, then back off slightly. This is not a volume control.
- Low Pass Crossover (LPF): Variable from 50-200Hz. Set this to filter out frequencies above your desired subwoofer range. A common starting point is 80-100Hz.
- Saringan Subsonik: Fixed at 25Hz. This filters out extremely low frequencies that the subwoofer cannot reproduce efficiently, protecting it from damage.
- KICKER EQ Boost: Variable to +12dB, centered at 40Hz. Use this to fine-tune the bass response to your preference. Use sparingly to avoid distortion.
5. Pangropéa
Regular maintenance ensures the longevity and performance of your KICKER system.
- beberesih: Tetep dina amplifier and subwoofer enclosure clean and free of dust and debris. Use a soft, dry cloth. Do not use liquid cleaners directly on components.
- Sambungan: Pariksa sacara berkala sadaya sambungan daya, ground, remote, sareng speaker pikeun mastikeun éta aman sareng bébas tina korosi.
- Ventilasi: Pastikeun amplifier's heatsink fins are not obstructed to allow for proper cooling.
6. Cara ngungkulan
If you experience issues with your system, refer to the following common problems and solutions:
6.1 Taya Daya / Amplifier Henteu Hurungkeun
- Pariksa sekering: Verify the fuse in the HA-AK8 kit's fuse holder is intact. Replace if blown.
- Sambungan Daya: Ensure the +12V power cable is securely connected to the battery and amppangagung.
- Sambungan taneuh: Confirm the ground cable has a solid connection to the chassis and amppangagung.
- Ngahurungkeun Jauh: Check that the remote wire is connected to both the head unit and amplifier, and that the head unit is powered on.
6.2 No Sound from Subwoofer
- Sambungan Speaker: Verify speaker wires are correctly connected to both the amplifier and subwoofer enclosure, with correct polarity.
- Masukan Sinyal: Ensure RCA or high-level input cables are securely connected to both the head unit and amppangagung.
- AmpKeuntungan Lifier: Ningkatkeun amplifier's gain control slightly.
- Setélan Head Unit: Pariksa setélan kaluaran sareng volume subwoofer head unit.
6.3 Sora menyimpang
- Setélan gain: Ngurangan ampkontrol gain lifier. Éta tiasa disetel teuing luhur.
- Tingkat Input: Ensure the head unit's volume is not excessively high, causing the input signal to clip.
- Crossover Setting: Adjust the LPF setting on the amppangagung.
6.4 Amplifier Overheating
- Ventilasi: Pastikeun amplifier has adequate airflow and is not covered.
- Impedansi: Verify the subwoofer's impedance matches the amplifier's capabilities (the 48DCWR122-RS is 2 Ohm, which the 46CXA8001 supports).
- Setélan gain: Ngurangan amplifier's gain.
7. Spésifikasi
7.1 KICKER 48DCWR122-RS Dual 12" CompR Series Subwoofer Enclosure
- Penanganan kakuatan: 1000 Watt RMS / 2000 Watt Puncak
- Recommended Power Range: 500 - 1000 Watts RMS
- Impedansi nominal: 2 ohm
- Tanggapan Frékuénsi: 25 - 500Hz
- Sensitipitas: 98dB
- Bahan congcot: Polipropilén
- Bahan Sakuliling: Ribbed Santoprene
- Pangwangunan kandang: MDF (Medium Density Fiberboard) with extensive internal bracing
- Jenis Kandang: Ported, Front-facing port
- Ukuran (Perkiraan):
- Box Top Depth: 14"
- Box Bottom Depth: 17 1/4"
- Box Height: 16"
- Box Width: 32 3/8"
7.2 KICKER 46CXA8001 Car Audio Class D Mono Amppangagung
- Kaluaran Daya RMS:
- 600 Watts x 1 @ 2 Ohm
- 800 Watts x 1 @ 1 Ohm
- Kaluaran Kakuatan Puncak:
- 1200 Watts x 1 @ 2 Ohm
- 1600 Watts x 1 @ 1 Ohm
- Tanggapan Frékuénsi: 25Hz - 200Hz
- Rasio Sinyal pikeun Noise: 95dB
- Sensitipitas Input:
- High level: 250mV-10V
- Low level: 125mV-5V
- Aktif Crossover: 12dB/octave, variable 50-200Hz, low pass only
- Saringan Subsonik: 24dB/octave high-pass fixed @ 25Hz
- KICKER EQ Boost: Variable to +12dB, centered @ 40Hz
- Ukuran (Perkiraan): 8-1/8" Length x 2-3/8" Height x 7-3/16" Width
8. Jaminan & Dukungan
KICKER products are engineered for performance and reliability. For specific warranty information regarding your KICKER 48DCWR122-RS subwoofer enclosure and 46CXA8001 amplifier, please refer to the warranty card included with your product or visit the official KICKER website. For support with the Harmony Audio HA-AK8 installation kit, please refer to Harmony Audio's documentation.
If you require technical assistance or have questions not covered in this manual, please contact KICKER customer support or your authorized KICKER dealer.
