Waveshare RS485 to Ethernet Converter User Manual

1. Bubuka

The Waveshare RS485 to Ethernet Converter (Model: RS485 TO ETH) is a device designed to facilitate communication between RS485 serial devices and an Ethernet network. It enables seamless data exchange, allowing RS485 devices to be integrated into modern IP-based systems. This manual provides essential information for the proper setup, operation, and maintenance of the converter.

Figure 1: Waveshare RS485 to Ethernet Converter with included power adapter. This image displays the Waveshare RS485 to Ethernet Converter unit alongside its power adapter. The converter features a black casing with green labels indicating DC 5V power input, Ethernet port, and RS485 screw terminals (A+, B-, GND). The power adapter is a standard wall plug type.

2. Produk Langkungview jeung Fitur

The Waveshare RS485 to Ethernet Converter is built with a focus on performance and reliability. Key features include:

M0 series 32-bit ARM processor for fast and efficient operation.
10/100M Auto-MDI/MDIX Ethernet interface, compatible with both cross-over and straight-through cables.
Configurable RS485 baud rate from 600bps to 230.4Kbps, supporting None, Odd, Even, Mark, and Space parity options.
Multiple working modes: TCP Server, TCP Client, UDP Server, UDP Client, and HTTPD Client (supports GET and POST).
Flexible configuration options via webpage, AT commands, serial protocol, and network protocol.
Support for customized heartbeat and registration packets for connection verification and device identification.
Bisa disaluyukeun webpage for module configuration.
RFC2217-like protocol support for devices with changing serial settings.
KeepAlive mechanism for detecting broken connections and automatic re-connection.
Time-out reboot (no-data reboot) for long-term stable connections, with configurable reboot time.
DNS domain name resolution and configurable DNS server.
DHCP support for auto-obtained IP or static IP configuration.
Firmware upgradable via the network.
Hardware and software options for restoring to factory settings.
Customizable MAC address.

3. Setélan

Follow these steps to set up your Waveshare RS485 to Ethernet Converter:

Sambungan Daya: Connect a DC 5V power supply to the DC 5V input jack on the converter. The recommended input voltage nyaéta 5.0-7.0V.
Sambungan Ethernet: Connect an Ethernet cable from the converter's RJ45 port to your network switch or router. The converter supports 10/100M Auto-MDI/MDIX.
Sambungan RS485: Connect your RS485 device to the green screw terminal block. Ensure correct polarity for A+ (positive), B- (negative), and GND (ground).
Konfigurasi awal: The device comes with default network settings. These are typically printed on a label on the bottom of the unit.

Figure 2: Bottom label of Waveshare RS485 to Ethernet Converter showing default network settings. The bottom of the converter unit displays a label with essential network configuration details: Model: RS485 TO ETH, Username: admin, Default IP: 192.168.0.7, Password: admin, MAC address, and Input power requirements (DC5-7V/500mA). The manufacturer's website, www.waveshare.net, is also listed.

For detailed setup instructions and advanced configurations, refer to the official Waveshare product wiki at www.waveshare.net.

4. Modeu Operasi

The converter supports various operating modes to suit different application requirements:

TCP Server: The converter listens for incoming TCP connections from clients.
TCP Client: The converter initiates a TCP connection to a specified server.
UDP Server: The converter listens for incoming UDP packets.
UDP Client: The converter sends UDP packets to a specified destination.
HTTPD Client: The converter can act as an HTTP client, supporting GET and POST requests.

5. Konfigurasi

The Waveshare RS485 to Ethernet Converter offers multiple methods for configuration:

Webpage Configuration: Access the converter's built-in web interface using its IP address (default: 192.168.0.7) in a web browser. Use the default username 'admin' and password 'admin' for login.
AT Paréntah: Configure the device using AT commands sent via the serial port.
Protokol Serial: Utilize a dedicated serial protocol for configuration.
Protokol Jaringan: Configuration can also be performed over the network using specific protocols.

Ngaronjatkeun firmware: The device's firmware can be updated over the network, ensuring access to the latest features and improvements.

Pabrik Reset: The converter can be restored to its factory default settings via both software commands and a hardware reset button (Reload button).

6. Parangkat lunak

Waveshare provides supporting software to assist with the use and configuration of the converter:

Module Configuration Software: A dedicated application for configuring the converter's parameters.
TCP/UDP Testing Tool: Software for testing TCP and UDP communication.
VCOM Virtual Serial Port Software: Allows the Ethernet port to be mapped as a virtual serial port on a computer.

Example code for various platforms (e.g., host computer socket, VB, C++, Delphi, Android, iOS) is also available from the manufacturer.

7. Spésifikasi

Figure 3: Technical specifications and dimension diagram for Waveshare RS485 to Ethernet Converter. A detailed diagram presenting the technical specifications for Ethernet, RS485, Power, and Environment, along with precise dimensions of the converter unit in millimeters. Key measurements like length, width, and height are indicated.

Waveshare RS485 to Ethernet Converter Specifications
Kategori	Parameter	Nilai
Ethernet	Panyambung	RJ45
	Laju Komunikasi	10/100Mbps
	Protection panganteur	1.5KV electromagnetic isolation
	Protokol	IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
	TX/RX Cache	6Kbyte / 4Kbyte
RS485	Panyambung	Screw terminal (A+, B-, GND)
	Bit Data	5 bit, 6 bit, 7 bit, 8 bit
	Eureun Bit	1, 2
	Parity Cék	Teu aya, Ganjil, Bahkan, Markus, Spasi
	Baudrat	600bps-230.4Kbps
	Protection panganteur	2KV ESD protection, RS485 pull up/down resistors: 2.2KΩ
Kakuatan	Sasayogian tanaga	5.0-7.0V (5V recommended)
	Operasi Ayeuna	150mA (@5V)
	Konsumsi Daya	<1W
	Protection panganteur	Reverse-proof, ESD protection, anti-surge
Lingkungan	Suhu Operasi	-25~75°C
Lingkungan	Suhu Panyimpenan	-40~105°C
Diménsi	Unit (L x W x H)	63.59mm x 41.13mm x 25.47mm (approximate, excluding mounting tabs)

8. Cara ngungkulan

If you encounter issues with your Waveshare RS485 to Ethernet Converter, consider the following:

Henteu aya sambungan jaringan: Verify that the Ethernet cable is securely connected and that your network infrastructure (router/switch) is functioning correctly. Check the converter's network indicator lights.
Teu Bisa Aksés Web panganteur: Ensure your computer's IP address is in the same subnet as the converter's default IP (192.168.0.7). If the IP has been changed, try to recall the new IP or perform a factory reset.
RS485 Communication Failure: Double-check the RS485 wiring for correct A+ and B- polarity. Ensure the baud rate, data bits, stop bits, and parity settings on the converter match those of your RS485 device.
Masalah kakuatan: Confirm that the power adapter is correctly connected and providing the specified DC 5V (5.0-7.0V) power.
Protokol Modbus: Please note that this converter does henteu natively support Modbus protocol. If your application requires Modbus, additional software or gateway solutions may be necessary.
Instabilitas Umum: If the device experiences intermittent issues, consider performing a factory reset and reconfiguring it. Ensure the operating environment is within specified temperature ranges.

For more in-depth troubleshooting guides and technical support, visit the official Waveshare websitus.

9. Pangropéa

To ensure the longevity and reliable operation of your converter:

Jaga alat tetep beresih sareng leupas tina lebu. Anggo kaén anu lemes sareng garing pikeun beberesih.
Operate the device within the specified environmental conditions (temperature and humidity).
Hindarkeun alat pikeun kalembaban anu kaleuleuwihan atanapi suhu anu ekstrim.
Pastikeun ventilasi anu pas di sabudeureun unit pikeun nyegah overheating.

10. Garansi jeung Rojongan

For information regarding product warranty, technical support, and additional resources, please refer to the official Waveshare websitus:

www.waveshare.net

The website provides comprehensive documentation, software downloads, and contact information for customer assistance.

	Waveshare RS232/485 to WiFi PoE Ethernet (B) Serial Server User Manual Explore the Waveshare RS232/485 to WiFi PoE Ethernet (B) User Manual, a comprehensive guide for the serial server that converts RS232/485 to TCP/IP network interfaces, enabling bidirectional data transmission via WiFi and Ethernet.
	Manual Pangguna Waveshare UART KA ETH (B): Panduan Konverter Serial ka Ethernet Manual pangguna anu lengkep pikeun modul Waveshare UART TO ETH (B), anu ngajelaskeun fitur-fiturna salaku konverter UART ka Ethernet, gerbang IoT, gerbang Modbus, sareng server serial pikeun aplikasi industri.
	Waveshare RS485 to WiFi/ETH MQTT Communication User Manual Comprehensive user manual for the Waveshare RS485 to WiFi/ETH module, guiding users through software and hardware preparation, network configuration, and establishing MQTT communication with platforms like EMQX.
	Waveshare RS485 TO ETH (B) User Manual - Industrial RS485 to Ethernet IoT Gateway Comprehensive user manual for the Waveshare RS485 TO ETH (B), an industrial serial device server and IoT gateway. Learn about its features, applications, configuration, and how to connect RS485 devices to Ethernet for Modbus, MQTT, and cloud integration.
	Waveshare RS232/485 TO WIFI ETH (B) User Manual: Setup, Features, and Applications Comprehensive user manual for the Waveshare RS232/485 TO WIFI ETH (B) serial server. Learn about its features, hardware and network setup, data transmission, various working modes, and application scenarios for industrial and IoT communication.
	RS232 / RS485 mun Ethernet & PoE Ethernet gateway spésifikasi Téknis This document provides detailed specifications, hardware and software features, and testing procedures for the Waveshare RS232/RS485 to Ethernet and PoE Ethernet gateways. These devices function as serial servers, Modbus gateways, and MQTT gateways for industrial data acquisition and IoT connectivity.