Okin 6 Button Control Handset User Manual

1. Produk Langkungview

The Okin 6 Button Control Handset is designed for use with power recliners and lift chairs, specifically those equipped with two motors. This handset provides intuitive control over the chair's movements, allowing for adjustment of various positions. It features a durable design with a 5-pin round plug for direct connection to the motor.

Fitur konci:

• OEM 4 or 6-button hand control handset manufactured by Okin.
• Features a 90-degree 5-pin connection for direct plug-in to the motor.
• Equipped with dedicated up and down buttons for controlling two separate motors.
• Broad compatibility with various brands including Okin, Catnapper, Tranquil Ease, Limoss, Golden, Mega Motion, Pride, Med, KD, and Bride Lift Chairs and Power Recliners.
• Total cord length is approximately 6.6 feet, providing ample ngahontal.

Figure 1: The Okin 6 Button Control Handset, showing the ergonomic design, control buttons, coiled cord, and the 90-degree 5-pin connector.

2. Émbaran Kasalametan penting

Please read and understand all safety instructions before installing or operating the control handset. Failure to follow these instructions may result in injury or damage to the product or furniture.

• Always ensure the chair is fully assembled and stable before use.
• Do not exceed the maximum weight capacity of the chair as specified by the chair manufacturer.
• Exercise caution when operating the chair's motors to prevent pinching or injury. Keep hands and feet clear of moving parts.
• Keep the handset away from liquids and extreme temperatures.
• Do not attempt to disassemble or repair the handset yourself. Contact qualified service personnel for repairs.

3. Setup jeung Instalasi

This handset is designed for simple plug-and-play installation. Ensure your power recliner or lift chair is compatible with a 5-pin round plug connection.

1. Pegatkeun Daya: Before beginning installation, unplug your recliner or lift chair from the wall outlet to prevent accidental operation.
2. Panggihan Port Sambungan: Identify the existing handset's connection port, typically located near the motor or power supply unit under the chair. If replacing an old handset, carefully disconnect it.
3. Sambungkeun Handset Anyar: Align the 5-pin round plug of the Okin handset with the corresponding port on your chair's motor. The 90-degree angle of the plug is designed for easy insertion. Gently push until the connection is secure. Do not force the plug.
4. Kabel Aman: Route the handset's cord in a way that it will not be pinched or tangled by the chair's moving parts. Use cable ties if necessary to keep it tidy and secure.
5. Mulangkeun Daya: Once the handset is securely connected and the cabling is managed, plug your recliner or lift chair back into the wall outlet.

angka 2: Tutup-up view of the 5-pin connector, illustrating the connection type for the Okin handset.

4. Parentah Operasi

The Okin 6 Button Control Handset provides straightforward operation for your power recliner or lift chair.

• Fungsi Tombol: The handset features multiple buttons, typically arranged in pairs. Each pair controls a specific motor or function of the chair. For a two-motor chair, one pair of buttons will control the backrest movement (recline/incline), and another pair will control the leg rest movement (raise/lower).
• Operating the Chair:
  • Pencét jeung tahan tombol "Naék" button for the desired section (e.g., backrest or leg rest) to move it upwards or outwards.
  • Pencét jeung tahan tombol "Turun" button for the desired section to move it downwards or inwards.
  • Release the button to stop movement at any desired position.
• Kasaluyuan: This handset is designed to be fully compatible with a wide range of power recliners and lift chairs that utilize a 5-pin connection and two motors. If your chair has different motor configurations or connection types, this handset may not be suitable.

5. Pangropéa sarta perawatan

Proper care will extend the life of your Okin 6 Button Control Handset.

• beberesih: Wipe the handset with a soft, dry cloth. For stubborn dirt, a slightly damp lawon bisa dipaké, tapi pastikeun teu aya Uap anu asup kana alat. Ulah make pembersih atawa pangleyur anu abrasif.
• Panyimpenan: When not in use, store the handset in a safe place where it will not be stepped on, dropped, or exposed to excessive heat or cold.
• Perawatan kabel: Avoid kinking, twisting, or placing heavy objects on the cord. Regularly inspect the cord and plug for any signs of damage. If damage is found, discontinue use and replace the handset.

6. Cara ngungkulan

If you experience issues with your Okin 6 Button Control Handset, refer to the following common problems and solutions:

7. Spésifikasi produk

8. Garansi jeung Rojongan

For information regarding warranty coverage, please refer to the documentation provided with your purchase or contact the seller directly. Okin products are generally known for their reliability.

If you require further assistance, technical support, or need to inquire about replacement parts, please contact the retailer from whom you purchased the handset or visit the official Okin brand store for more information:

Nganjang ka Okin Store on Amazon