1. Bubuka
The EBYTE E34-DTU-2G4D20 is a robust 100mW wireless data transceiver operating in the 2.4GHz to 2.518GHz frequency band. It facilitates data transmission and reception via RS232 and RS485 serial ports, simplifying wireless application integration. This module is engineered for high-speed, full-duplex communication, supporting simultaneous bidirectional data flow and file transfers. It features data encryption and compression to enhance security and transmission efficiency. Designed for industrial environments, the E34-DTU-2G4D20 operates within a wide voltage range of 8V to 28V and adheres to international design specifications including FCC, CE, and CCC.
Gambar 1: Hareupeun view of the EBYTE E34-DTU-2G4D20 wireless data transceiver, showing RS232, RS485, DC-IN, and antenna ports.
2. Fitur konci
- Reliable nRF24L01P+ Chip: Utilizes original nRF24L01P+ chips for enhanced reliability and performance.
- Kinerja luhur: Features 100mW (20dBm) transmit power, meeting European industrial standards.
- Industrial Grade Durability: Equipped with temperature compensators for frequency stability (±1.5PPM) and an operating temperature range of -40℃ to +85℃.
- Desain mantap: Housed in an aluminum alloy case for excellent heat dissipation, shielding, electromagnetic compatibility, and strong anti-interference capabilities.
- Fitur panyalindungan: Includes power reverse, overload protection, and antenna surge protection to improve system reliability.
- Parameter anu tiasa dikonpigurasikeun: Allows programming of parameters such as transmit power, frequency, air data rate, and address.
- Full-Duplex Communication: Supports simultaneous bidirectional data transmission at high baud rates.
- Kaamanan Data: Incorporates data encryption and compression for secure and efficient data transfer.
Gambar 2: Angled view of the E34-DTU-2G4D20, highlighting its compact design and robust casing.
3. Spésifikasi Téknis
| Parameter | Nilai |
|---|---|
| Rentang Frékuénsi | 2.4 GHz ka 2.505 GHz |
| Ngirimkeun Daya | 20 dBm (100 mW) |
| Jarak Pangiriman | Up to 2.0 km (line of sight) |
| Panganteur | RS232 / RS485 |
| Pasokan Voltage | 8V ka 28V DC |
| Suhu Operasi | -40 ℃ nepi ka + 85 ℃ |
| Stabilitas Frékuénsi | ± 1.5 PPM |
| Produsén | EBYTE |
| Modél | E34-DTU-2G4D20 |
Gambar 3: Physical dimensions of the E34-DTU-2G4D20 module.
4. Setup jeung Instalasi
Follow these steps to set up your E34-DTU-2G4D20 wireless transceiver:
- Connect Data Interface: Connect the E34-DTU-2G4D20 to your PC, PLC, or RTU using either the RS232 or RS485 interface. Ensure proper wiring for the selected serial communication standard.
- Pasangkeun Antena: Connect a 50Ω antenna or a dummy load to the ANT port on the transceiver. A suitable antenna is crucial for optimal wireless performance.
- Sasayogian tanaga: Provide power to the module via the DC-IN port. The module accepts a voltage range of 10V to 28V DC. You can use a regulated power supply or a compatible power adapter.
- Pamasangan supir (upami diperyogikeun): If connecting to a PC, download and install the necessary drivers from the EBYTE official website to ensure proper recognition of the serial port.
- Initial Testing (Optional): For quick verification of functionality, use a serial port debugging assistant software.
- Download and install a serial port debugging assistant.
- Connect the radio, antenna, and power supply to your computer.
- Open the debugging assistant, select the corresponding serial port number, and configure it to send and receive test data.
Gambar 4: Connection diagram illustrating how to connect the E34-DTU-2G4D20 to a PC/PLC/RTU, antenna, and power supply.
Gambar 5: Screenshot demonstrating quick visualization tests for data reception and sending using serial port software.
5. Modeu Operasi
The E34-DTU-2G4D20 supports various operating modes, configurable via the M0 and M1 pins (typically DIP switches or jumpers). Understanding these modes is crucial for optimal performance in different applications.
| Modus | M0 | M1 | Katerangan |
|---|---|---|---|
| Mode 0: General Mode | ON | ON | Standard operating mode for serial open, wireless open, and transparent data transmission. |
| Mode 1: Wake-up Mode | ON | Pareum | Wake-on-Air transmit mode. Packets include wake-up codes to activate receiving modules. |
| Mode 2: Battery Saving Mode | Pareum | ON | Wake-on-Air receive mode. Designed to save power by only receiving data when woken up. This mode does not support transmission. |
| Mode 3: Sleeping Mode | Pareum | Pareum | The module enters a low-power sleep state. It can still receive parameter setting commands. |
Gambar 6: Illustration of full-duplex high-speed transmission, showing simultaneous data flow between two E34-DTU modules.
6. Pangropéa
To ensure the longevity and optimal performance of your E34-DTU-2G4D20 transceiver, consider the following maintenance guidelines:
- Kaayaan Lingkungan: Operate the module within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures, direct sunlight, or high moisture.
- Kabersihan: Keep the module free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
- Sambungan: Periodically check all cable connections (RS232/RS485, antenna, power) to ensure they are secure and free from damage.
- Perawatan Antenna: Ensure the antenna is properly installed and not obstructed. Avoid bending or damaging the antenna.
- Sasayogian tanaga: Use only power supplies that meet the specified voltage sareng sarat ayeuna pikeun nyegah karusakan.
7. Cara ngungkulan
If you encounter issues with your E34-DTU-2G4D20, refer to the following common troubleshooting steps:
- Henteu aya kakuatan:
- Verify the power supply is connected correctly and providing the specified voltage (8V-28V DC).
- Pariksa kabel kakuatan pikeun karuksakan nanaon.
- Pastikeun sumber kakuatan aktip.
- No Data Transmission/Reception:
- Confirm that the RS232 or RS485 connections are secure and correctly wired.
- Check the antenna connection and ensure it is a 50Ω antenna.
- Verify that both transceivers are configured to the same frequency, air data rate, and address.
- Ensure the operating mode (M0, M1 settings) is appropriate for your application (e.g., not in sleeping mode if expecting to transmit).
- Check the serial port settings (baud rate, parity, data bits, stop bits) in your software to match the module's configuration.
- For PC connections, ensure the correct serial port driver is installed and the COM port is selected in your application.
- Poor Signal Quality or Short Range:
- Ensure the antenna is positioned optimally and not obstructed by metal objects or walls.
- Check for potential sources of interference in the 2.4GHz band.
- Verify the transmit power setting of the module.
- Modul Panas teuing:
- Pastikeun ventilasi anu cekap di sakitar modul.
- Pastikeun suhu ambient aya dina rentang operasi anu ditangtukeun.
- Pariksa lamun catu daya voltage is within the acceptable limits.
8. Garansi jeung Rojongan
EBYTE products are designed for reliability and performance. For specific warranty details, please refer to the documentation included with your purchase or visit the official EBYTE website. For technical support, product inquiries, or assistance with troubleshooting beyond this manual, please contact EBYTE customer service through their official channels.
Pabrikan: EBYTE
Resmi Websitus: www.ebyte.com
Gambar 7: Product box label showing manufacturer information and certifications.
