1. Bubuka
This manual provides detailed instructions for the installation, operation, and maintenance of your Sensea Luka 2 Rain Effect Shower System. Please read this manual carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
2. Produk Langkungview
The Sensea Luka 2 is a complete shower system designed to provide a pleasant showering experience with a timeless design. It includes a rain shower head, a hand shower, a shower bar, and a hose.
komponén:
- Rain Shower Head (Square, 25x25 cm, Chrome, ABS plastic, Swivel function)
- Hand Shower (21x2.8 cm, Chrome, ABS plastic)
- Shower Bar (Square, Chrome, Stainless steel, 30mm diameter, Adjustable height 98-120 cm)
- Shower Hose (PVC, 1.5m length, Anti-twist, Flexible, 1/2 inch inlet diameter)
- Wall Mount (Adjustable to existing holes)
- Bahan Pamasangan
Gambar 1: Complete Sensea Luka 2 Rain Effect Shower System. This image shows the full shower system including the square rain shower head, the vertical shower bar, and the hand shower attached to the bar.
3. Setup jeung Instalasi
Installation should be performed by a qualified professional if you are unsure about any steps. Ensure all components are present before beginning.
Parabot anu diperyogikeun (Teu Kalebet):
- Bor
- Pita ukur
- Tingkat
- rengkuh
- Pensil
Léngkah-léngkah pamasangan:
- Nyiapkeun Area Instalasi: Ensure the water supply is turned off. Clear the area where the shower system will be installed.
- Mount the Shower Bar:
- Position the shower bar against the wall at the desired height. The total height is adjustable from 98 cm to 120 cm.
- Mark the drilling points for the wall mounts. The fixing distance is 720 mm. The wall mounts are adjustable to adapt to existing holes.
- Bor liang teras pasangkeun colokan témbok anu cocog.
- Secure the wall mounts to the wall.
- Attach the shower bar to the secured wall mounts.
- Sambungkeun Selang Pancuran:
- Connect the 80 cm connection hose to your existing faucet (faucet not included). The inlet hose diameter is 1/2 inch (15x21).
- Connect the other end of the hose to the shower bar's water inlet.
- Pastikeun sadaya sambungan kedap pikeun nyegah bocor.
- Attach Shower Heads:
- Attach the rain shower head to the top arm of the shower bar.
- Attach the hand shower to the adjustable holder on the shower bar.
- Connect the 1.5m flexible hose to the hand shower and the outlet on the shower bar.
- Nguji Sistim: Turn on the water supply and check for any leaks. Test both the rain shower and hand shower functions.
Gambar 2: Rain shower head in operation. This image illustrates the water flow from the square rain shower head, demonstrating its effect.
4. Parentah Operasi
The Sensea Luka 2 shower system is designed for ease of use. Your existing faucet (not included) will control the water temperature and flow to the shower system.
Switching Between Shower Functions:
The system typically includes a diverter valve on the shower bar to switch water flow between the rain shower head and the hand shower. Locate this diverter and rotate or pull it to select your desired shower output.
Nyaluyukeun Jangkungna Pancuran Leungeun:
The hand shower holder is integrated into the shower bar and is height-adjustable. Simply slide the holder up or down the bar to position the hand shower at a comfortable height.
Gambar 3: Hand shower in operation. This image displays the hand shower spraying water, highlighting its functionality.
5. Pangropéa
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Sensea Luka 2 shower system.
beberesih:
- Use a soft cloth and mild soap or a non-abrasive bathroom cleaner.
- Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the chrome finish and plastic components.
- For limescale buildup on shower nozzles, gently rub them with your fingers or a soft brush to dislodge deposits. Some shower heads feature flexible silicone nozzles for easy cleaning.
- Rinse thoroughly with clean water after cleaning to remove any cleaner residue.
Perawatan Umum:
- Pariksa périodik sadaya sambungan pikeun tightness pikeun nyegah bocor.
- Ensure the shower hose is not kinked or twisted, especially the anti-twist feature.
Gambar 4: Detail of the Sensea Luka 2 shower system. This image provides a closer look at the hand shower and the adjustable holder on the main bar.
6. Cara ngungkulan
Bagian ieu ngabahas masalah umum anu anjeun tiasa pendak sareng sistem pancuran anjeun.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| tekanan cai low |
|
|
| Bocor dina sambungan |
|
|
| Water not switching between shower heads |
|
|
7. Spésifikasi
| merek | Sensea |
| Modél | Luka 2 |
| Rujukan Produsén | 80123742 Duschsystem FSL2 (AD) |
| Bahan | Stainless Steel, Brass, ABS Plastic, PVC |
| Warna | Krom (Pérak) |
| Tipe Pamasangan | Tembok Gunung |
| Total Column Height | Bisa diatur ti 98 cm nepi ka 120 cm |
| Fixing Distance | 720 mm |
| Rain Shower Head Dimensions | 25 x 25 cm (Square) |
| Hand Shower Dimensions | 21 x 2.8 cm |
| Panjang selang | 1.5 m (flexible, anti-twist) |
| Diaméter Selang Inlet | 1/2 inch (15 x 21) |
| Water Consumption (at 3 bar, 38°C) | 12 to 16 l/min (full rain jet) |
| Minimum Boiler Power | 15 kW |
| Ukuran Paket | 77 x 28.5 x 9 cm |
| Beurat pakét | 3.85 kg |
8. Garansi jeung Rojongan
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Sensea customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, please visit the official Sensea websitus atanapi ngahubungan garis rojongan customer maranéhanana.
