Hypertech React Throttle Optimizer

1. Bubuka

The Hypertech React Throttle Optimizer is an advanced electronic device designed to enhance your vehicle's throttle response. This Towing Version (Model 102101) is specifically engineered to optimize power delivery when towing or hauling, providing fully customizable control over your vehicle's acceleration characteristics.

The React system offers a simple, plug-and-play installation and features an intuitive control knob for on-the-fly adjustments to various driving modes and intensity levels.

2. Émbaran Kasalametan

• Always ensure the vehicle is turned off and the ignition is disengaged before attempting installation or removal of the device.
• Follow all local and national safety regulations when working on your vehicle.
• Do not attempt to modify the device or its wiring, as this may compromise its safety features and void any applicable warranties.
• The Hypertech React Throttle Optimizer is designed with multiple levels of safety protection. Proper installation is crucial for its intended operation.
• This product is designed not to void your factory vehicle warranty when installed and used correctly.

3. Eusi Paket

Punten parios yén sadaya komponén ieu kalebet dina pakét anjeun:

• Pedal module
• Modul Kontrol
• Wiring abah
• Kabel USB
• Gunung ventilasi
• Pituduh pamasangan
• Dasi seleting
• Decals

4. Setup jeung Instalasi

The Hypertech React Throttle Optimizer features an easy plug-and-play installation process with an automatic setup sequence, requiring no disassembly of major vehicle components. For detailed, vehicle-specific instructions, always refer to the included installation guide.

1. Locate the Accelerator Pedal Position Sensor: Identify the connector for your vehicle's accelerator pedal position sensor. The exact location may vary by vehicle model and year. Consult your vehicle's service manual or the included Hypertech installation guide for precise details.
2. Disconnect the OEM Connector: Carefully disconnect the factory wiring harness from the accelerator pedal position sensor.
3. Connect the React Harness: Connect the Hypertech React wiring harness inline with the accelerator pedal position sensor. One end of the React harness connects to the vehicle's factory connector, and the other end connects to the accelerator pedal position sensor. Ensure all connections are secure.
4. Mount the Control Module: Use the provided magnetic A/C vent mount to securely position the control module within easy reach of the driver. Ensure the module is mounted in a location that does not obstruct driving or airbag deployment. A pedestal swivel mount is also available separately.
5. Jalur Wiring: Neatly route any excess wiring using the included zip ties to prevent interference with pedals or other vehicle components.
6. Setup otomatis: Once installed, turn the vehicle's ignition to the 'ON' position (do not start the engine). The React Throttle Optimizer will perform an automatic setup sequence. Follow any prompts or indicators on the control module.
7. Operasi tés: After the setup is complete, start the vehicle and test the functionality of the React Throttle Optimizer in a safe environment.

5. Parentah Operasi

The React Throttle Optimizer provides fully customizable control over your vehicle's throttle response through its simple control knob. You can switch between multiple driving modes and adjust the intensity of each mode on-the-fly.

• Switching Drive Modes: Press the central control knob to cycle through the available drive modes. The active mode will be indicated by an illuminated LED on the control module. The available modes for the Towing Version are:
• Heavy Tow: Optimized for maximum power delivery and responsiveness when towing very heavy loads.
• Tow: Enhanced throttle response for general towing and hauling.
• ékonomi: Designed to smooth out throttle input for improved fuel efficiency.
• Wet/Ice: Reduces throttle sensitivity for better control in slippery conditions.
• Stok: Reverts the throttle response to the vehicle's original factory settings.
• Adjusting Throttle Intensity: Rotate the central control knob to adjust the intensity within the selected drive mode.
• Rotating the knob up (clockwise) increases the throttle intensity, making the pedal more responsive.
• Rotating the knob down (counter-clockwise) decreases the throttle intensity, making the pedal less responsive.
• Nerapkeun Parobahan: For a new mode or intensity selection to take effect, your accelerator pedal position must be below a safe threshold (approximately 25%, though this percentage may vary with application). This ensures smooth transitions and prevents unintended acceleration.

6. Pangropéa

• beberesih: Keep the control module clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Pamariksaan kabel: Periodically inspect the wiring harness for any signs of wear, damage, or loose connections. Ensure all zip ties are secure.
• Apdet parangkat lunak: The Hypertech React Throttle Optimizer is internet updateable. Visit the official Hypertech website for information on available software updates and instructions on how to apply them using the provided USB cable. Keeping your device updated ensures optimal performance and access to the latest features.

7. Cara ngungkulan

• Alat Teu Dihurungkeun:
  • Ensure all connections in the wiring harness are fully seated and secure.
  • Pastikeun konci kontak kendaraan aya dina posisi 'ON'.
• No Change in Throttle Response:
  • Confirm that the control module is powered on and displaying an active mode.
  • Ensure your accelerator pedal is below the safe threshold (approx. 25%) when attempting to change modes or intensity.
  • Re-check all wiring connections to the accelerator pedal position sensor.
• Installation Discrepancies:
  • If the physical location or appearance of your vehicle's accelerator pedal position sensor connector differs from the general instructions, refer immediately to the detailed, vehicle-specific installation guide provided with your product. Vehicle configurations can vary significantly.
• Masalah Persisten: If you experience persistent issues that cannot be resolved with the above steps, please contact Hypertech customer support for further assistance.

8. Spésifikasi

9. Garansi jeung Rojongan

For specific warranty details regarding your Hypertech React Throttle Optimizer, please refer to the documentation included with your purchase or visit the official Hypertech website. Hypertech stands behind its products and offers technical support to assist with any questions or issues you may encounter.

Ngahubungan Rojongan:

• Visit the official Hypertech websitus pikeun FAQs, sumberdaya rojongan, sarta informasi kontak.
• Have your product model number (102101) and purchase information ready when contacting support.