Cisco CP-68KEM-3PCC Expansion Module User Manual

1. Bubuka

This manual provides instructions for the installation, operation, and maintenance of the Cisco CP-68KEM-3PCC Expansion Module. This module is designed to enhance the functionality of your Cisco IP Phone 6851 by providing additional programmable keys.

Figure 1: Cisco CP-68KEM-3PCC Expansion Module. This image shows the front view of the expansion module with its grayscale LCD screen and programmable keys.

The Cisco CP-68KEM-3PCC Expansion Module adds 14-line keys and 2-page keys, totaling 28 additional keys, with an easy-to-read grayscale LCD screen. It is ideal for monitoring and managing call status, directory numbers, and speed dial functions.

2. Naon dina Box

Buka bungkus kotak sareng pastikeun sadaya barang aya:

• Cisco CP-68KEM-3PCC Phone Expansion Module
• Connecting Cable (typically included for linking to the phone)
• Dokuméntasi (manual pangguna ieu, inpormasi kaamanan)

If any items are missing or damaged, please contact your vendor or Cisco support immediately.

3. Parentah Setup

Follow these steps to connect your Cisco CP-68KEM-3PCC Expansion Module to your Cisco IP Phone 6851.

1. Prepare the IP Phone: Ensure your Cisco IP Phone 6851 is powered off and disconnected from the network.
2. Connect the Expansion Module: Locate the expansion port on the back or side of your Cisco IP Phone 6851. Connect the provided connecting cable from the expansion module to this port.
3. Amankeun Sambungan: Pastikeun kabel dicekel aman pikeun nyegah pegatna teu kahaja.
4. Daya Hurung: Reconnect your Cisco IP Phone 6851 to the network and power it on. The expansion module should be detected automatically.
5. Verifikasi Fungsionalitas: Once the phone has booted, check the expansion module's display and keys to ensure they are responsive.

For detailed visual instructions, refer to the official Cisco documentation or support websitus.

4. Operating the Expansion Module

The expansion module provides additional keys for various functions, enhancing your call management capabilities.

4.1 kenop Programmable

The 28 programmable keys (14 keys across 2 pages) can be configured for:

• Directory Numbers (DNs): Assign specific phone lines or extensions.
• Dial gancang: Program frequently called numbers for quick access.
• Konci Fitur: Assign functions like call transfer, conference, or call park.
• Call Status Monitoring: Monitor the status of other lines (e.g., busy, ringing).

4.2 Page Navigation

Use the dedicated page keys (usually located near the display) to switch between the two pages of programmable keys. The grayscale LCD screen will update to show the labels for the currently active page.

4.3 Konfigurasi

Configuration of the programmable keys is typically managed through your organization's phone system administrator or via the web interface of the Cisco IP Phone 6851. Consult your IT department for specific configuration instructions.

5. Pangropéa

To ensure the longevity and optimal performance of your Cisco CP-68KEM-3PCC Expansion Module, follow these maintenance guidelines:

• beberesih: Use a soft, dry, lint-free cloth to clean the exterior surfaces. For stubborn marks, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish and electronic components.
• Lingkungan: Keep the module in a clean, dry environment, away from direct sunlight, excessive heat, and moisture.
• Penanganan: Ati-ati dina ngurus modul ieu. Ulah nepi ka muragkeun atawa kakeunaan dampak anu kuat.
• Manajemén Kabel: Ensure connecting cables are not kinked, pinched, or under strain.

There are no user-serviceable parts inside the expansion module. Do not attempt to open or repair the device yourself.

6. Cara ngungkulan

If you encounter issues with your expansion module, try the following troubleshooting steps:

If these steps do not resolve the issue, please contact Cisco technical support or your authorized reseller.

7. Spésifikasi

8. Émbaran jaminan

The Cisco CP-68KEM-3PCC Expansion Module comes with a Garansi produk 2 taun ti tanggal pameseran. Garansi ieu ngawengku cacad dina bahan sareng padamelan dina panggunaan normal. Éta henteu ngawengku karusakan anu disababkeun ku salah guna, kacilakaan, modifikasi anu teu sah, atanapi panyabab éksternal.

For warranty claims or detailed terms and conditions, please refer to the official Cisco warranty policy available on their websitus atanapi ngahubungan titik pameseran Anjeun.

9. Rojongan

For technical assistance, product information, or to report issues, please contact Cisco support:

• Dukungan Cisco Websitus: Nganjang ka resmi Dukungan Cisco websitus for documentation, downloads, and contact options.
• Authorized Reseller: Contact the reseller from whom you purchased the product.

When contacting support, please have your product model (CP-68KEM-3PCC) and serial number ready.