Reloop RP-1000 MK2 Professional Belt Drive Turntable System

1. Bubuka

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-1000 MK2 Professional Belt Drive Turntable System. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

The Reloop RP-1000 MK2 is designed for both aspiring DJs and HiFi enthusiasts, offering high-quality audio reproduction through its belt-driven mechanism. This design effectively isolates the platter from motor vibrations, ensuring clear, distortion-free sound. The MK2 version features an enhanced top panel construction, improved metallic buttons, and a pre-fitted Ortofon OM Black pick-up system for immediate playback.

2. Parentah Kasalametan

To ensure safe operation and prolong the life of your turntable, please observe the following safety guidelines:

• Sasayogian tanaga: Connect the unit only to an AC outlet with the correct voltage as indicated on the product. Ensure the power cord is not pinched or walked on.
• Uap: Ulah ngalaan unit ka hujan, Uap, atawa asor kaleuleuwihan. Ulah nempatkeun objék ngeusi cairan, kayaning vases, dina unit.
• Ventilasi: Pastikeun ventilasi nyukupan di sabudeureun unit. Ulah meungpeuk bukaan ventilasi.
• Sumber Panas: Jauhkeun unit tina sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
• beberesih: Clean only with a dry cloth. Avoid using liquid cleaners or aerosols.
• Palayanan: Do not attempt to service the unit yourself. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• panempatan: Place the turntable on a stable, level surface to prevent vibrations and ensure proper tracking.

3. Eusi Paket

Mangga parios heula sadaya barang anu didaptarkeun di handap ieu kalebet kana pakét anjeun:

• Plat Muter
• OM Black pick-up system (by Ortofon)
• Cangkang hulu
• Slipmat
• counterweight
• Kabel listrik
• Manual Instruksi Operasi (dokumen ieu)

If any items are missing or damaged, please contact your retailer or Reloop customer support immediately.

4. Produk Langkungview

Familiarize yourself with the main components of your Reloop RP-1000 MK2 turntable.

Gambar 4.1: Angled view of the Reloop RP-1000 MK2 turntable, showcasing the platter, tonearm, and control panel.

Gambar 4.2: Top-handap view highlighting the platter, slipmat with Reloop logo, S-shaped tonearm, and pitch control slider.

Gambar 4.3: Detil view of the S-shaped tonearm, headshell, and the pre-fitted Ortofon OM Black pick-up system.

Figure 4.4: Close-up of the power knob, start/stop button, and speed selection buttons (33/45 RPM).

Komponén konci:

• Piring: Precision-engineered, die-cast aluminum platter for stable rotation.
• Tonearm: Statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism.
• Cartridge: High-quality OM Black pick-up system by Ortofon, pre-fitted to a headshell.
• Kontrol pitch: Adjustable slider with a range of +/-10% for fine speed adjustments.
• Speed Select Buttons: Buttons for selecting 33 1/3 RPM and 45 RPM playback speeds.
• Tombol Start / Stop: Ngadalikeun rotasi platter.
• Target Light: Extendable aluminum target light to illuminate the needle position in dark environments.
• Shock-absorbing Feet: Improve isolation from unwanted vibrations.

5. Setélan

5.1 Ngabongkar sareng Nempatkeun

1. Cabut sadaya komponén tina bungkusna kalayan ati-ati. Simpen bungkusna kanggo diangkut atanapi disimpen engké.
2. Place the turntable on a flat, stable, and level surface, away from direct sunlight, heat sources, and strong magnetic fields.
3. Ensure there is sufficient space around the unit for ventilation.

5.2 Platter jeung Beubeur Instalasi

1. Tempatkeun piring kana spindel tengah. Pastikeun éta dipasang kalayan pageuh.
2. Locate the drive belt. Carefully stretch the belt around the inner rim of the platter and hook it onto the motor pulley, which is visible through one of the platter's openings.
3. Tempatkeun alas kaki anu dilapis ku lawon katun di luhur piring.

5.3 Tonearm Setup

The OM Black pick-up system is pre-fitted to the headshell. Follow these steps to balance the tonearm:

1. Attach the headshell with the pre-fitted cartridge to the front end of the tonearm. Secure it by turning the locking ring clockwise.
2. Place the counterweight onto the rear of the tonearm and rotate it until it is approximately centered.
3. Ngaleupaskeun tonearm clamp and lower the tonearm lift.
4. Carefully adjust the counterweight by rotating it forwards or backwards until the tonearm is perfectly balanced and floats horizontally.
5. Once balanced, hold the counterweight steady and rotate only the numbered ring on the front of the counterweight to '0' (zero).
6. Rotate the entire counterweight (including the numbered ring) counter-clockwise to set the recommended tracking force for the Ortofon OM Black cartridge, typically between 1.5 to 2.0 grams. Refer to the cartridge manufacturer's specifications for the precise recommended tracking force.
7. Set the anti-skating dial to the same value as your tracking force.
8. Balikkeun tonearm kana tempatna teras amankeun ku clamp.

5.4 Sambungan Audio sareng Daya

1. Connect the RCA audio cables from the turntable's output to the PHONO input of your amplifier or mixer. Ensure correct left (white) and right (red) channel connections.
2. Sambungkeun kabel ground ti turntable ka terminal ground dina komputer anjeun amplifier or mixer to minimize hum.
3. Plug the power cord into the turntable's power input and then into a suitable AC power outlet.

6. Parentah Operasi

6.1 Operasi Dasar

1. Daya Hurung: Turn the power knob clockwise to the "ON" position. The platter will not start spinning until the START/STOP button is pressed.
2. Pilih Speed: Press the "33" or "45" button to select the desired playback speed according to the record you are playing. The corresponding LED will illuminate.
3. Rékam tempat: Carefully place a vinyl record onto the platter.
4. Mimitian Piring: Press the START/STOP button. The platter will begin to rotate.
5. Posisi Tonearm: Ngaleupaskeun tonearm clamp. Use the tonearm lift lever to raise the tonearm. Carefully move the tonearm over the desired track on the record.
6. Tonearm handap: Gently lower the tonearm lift lever to allow the stylus to descend onto the record groove.
7. Maén: The audio will now play through your connected audio system.
8. Eureun Puterkeun: At the end of the record, or when you wish to stop, use the tonearm lift lever to raise the tonearm, return it to its rest, and secure it with the clamp. Press the START/STOP button to stop the platter rotation.
9. Pareum listrik: Turn the power knob counter-clockwise to the "OFF" position when not in use.

6.2 Using Pitch Control

The pitch control slider allows you to finely adjust the playback speed by +/-10%. Move the slider up or down to increase or decrease the speed. The center detent indicates 0% pitch adjustment (nominal speed).

6.3 Target Light

Press the aluminum target light button to extend the light, illuminating the needle position. This is particularly useful in low-light environments. Press it again to retract the light.

7. Pangropéa

7.1 Ngabersihan Unit

• Salawasna pegatkeun sambungan kabel listrik sateuacan diberesihan.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable.
• Pikeun tanda nekad, a rada damp lawon bisa dipaké, dituturkeun ku lawon garing langsung. Ulah make pembersih atawa pangleyur anu abrasif.

7.2 Kamanusaan sarta Studi Stylus

• The stylus (needle) is a delicate component. Handle it with extreme care.
• Clean the stylus regularly using a soft brush designed for stylus cleaning, brushing gently from back to front.
• A worn or dirty stylus can damage your records and degrade sound quality. Replace the stylus when signs of wear are apparent (e.g., distorted sound, skipping).

7.3 Panggantian Sabuk

The belt is a wear-and-tear part. If you notice inconsistent speed or the platter not spinning, the belt may need replacement. Contact Reloop support or an authorized service center for replacement belts and instructions.

7.4 Dust Cover Care (if applicable)

If your turntable includes a dust cover, clean it with a soft, damp cloth. Avoid using dry cloths as they can scratch the acrylic surface. Do not use harsh chemicals.

8. Cara ngungkulan

Before contacting support, please refer to the following common issues and their solutions:

9. Spésifikasi

10. Garansi jeung Rojongan

10.1 Émbaran jaminan

Reloop products are manufactured to the highest quality standards. This product comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Reloop websitus kanggo syarat sareng katangtuan garansi anu lengkep anu lumaku pikeun wilayah anjeun.

Simpen bukti pameseran anjeun (struk atanapi faktur) sabab éta bakal diperyogikeun pikeun klaim garansi.

10.2 Rojongan Palanggan

Should you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact Reloop customer support or your authorized dealer. Contact information can typically be found on the official Reloop websitus atanapi dina bungkusan produk Anjeun.

For the latest information, FAQs, and support resources, please visit the official Reloop websitus: www.reloop.com