Ring Floodlight Wired Instruction Manual

Bubuka

The Ring Floodlight Wired is a motion-activated smart floodlight designed to illuminate large outdoor areas such as driveways, side yards, and high-traffic zones. Featuring bright LEDs and seamless integration with the Ring app and Amazon Sidewalk, this device offers customizable controls and enhanced security for your home. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance.

Image: The Ring Floodlight Wired in white, featuring two adjustable LED light heads and a central motion sensor, designed for outdoor use.

Naon dina Box

Upon opening your Ring Floodlight Wired package, you will find the following components:

• Ring Floodlight Wired unit with integrated motion sensor and LED lights.
• Pamasangan bracket.
• Installation hardware (screws, wire nuts, hook for temporary hanging).
• Small screwdriver with interchangeable flathead and Phillips head bits.
• Weatherproof gasket.
• Ring security sticker.
• Quick Start Guide and documentation.

Setup sareng Instalasi

The Ring Floodlight Wired is designed for hardwired installation, replacing an existing floodlight or connecting to standard AC wiring. A Ring Bridge (sold separately) is required for smart features and app control.

1. Kasalametan Kahiji: Pareuman Power

Before beginning any electrical work, ensure the power to the existing floodlight or the circuit you will be using is turned off at the breaker. Verify with a voltage panguji.

2. Pasang bracket dipasang

Attach the metal mounting bracket to your junction box using the provided screws. Ensure the 'FRONT' text on the bracket faces outwards. The included hook can temporarily hold the light during wiring.

3. Prepare the Weatherproof Gasket

Peel the backing from the 3M tape on the weatherproof gasket and align it with the plastic mounting plate. Ensure the holes for the wires and screws match up for a secure, weather-resistant seal.

Image: A white Ring Floodlight Wired is mounted on the exterior of a modern house, casting bright light across the driveway and front yard during nighttime, enhancing visibility and security.

4. Wire the Floodlight

Connect the wires from your house to the corresponding wires on the Ring Floodlight Wired (typically black to black, white to white, and ground to ground) using the provided wire nuts. Push the connected wires carefully into the junction box.

5. Mount the Floodlight

Align the floodlight unit with the mounting bracket and secure it with the provided screws. Ensure a snug fit to maintain weather resistance. Adjust the light heads and motion sensor to your desired coverage area.

6. App Setup (Ring Bridge Required)

Download the Ring - Always Home app from your device's app store. Open the app, create an account or log in, and select "Set Up a Device" > "Smart Lighting." Scan the QR code found on your device or in the documentation to connect your Floodlight Wired to your Ring Bridge. Follow the on-screen prompts to complete the setup, including naming your device and assigning it to a group.

Parentah Operasi

Once installed and set up in the Ring app, you can control your Floodlight Wired remotely and customize its behavior.

• Kontrol Manual: Use the "Lights" toggle in the Ring app to manually turn the floodlight on or off.
• Deteksi gerak: Enable or disable motion detection via the app. Adjust motion sensitivity (Low, Medium, High, Custom) to prevent false triggers from pets or high-traffic areas.
• Sénsor cahaya: Configure the light sensor threshold to determine how bright it needs to be outside for the lights to activate. This prevents lights from turning on during daylight hours.
• Light Schedules: Create custom schedules for your floodlight to turn on/off at specific times, or from dusk to dawn.
• Linked Devices: Group your Floodlight Wired with other Ring Smart Lighting devices. When one device detects motion, it can trigger other linked devices to turn on, creating a unified security network.
• Riwayat Acara: Review a history of when the lights were turned on/off and when motion was detected.

Image: A hand holds a smartphone displaying the Ring app, which shows various smart home controls including a 'Lights' section with options for 'Locks', 'Lights', 'Front Yard', and 'Back Yard', indicating remote management capabilities.

Pangropéa

To ensure the longevity and optimal performance of your Ring Floodlight Wired, follow these maintenance guidelines:

• beberesih: Periodically wipe the light heads and motion sensor with a soft, damp cloth to remove dirt, dust, and debris. Avoid using harsh chemicals or abrasive cleaners.
• Pamariksaan: Pariksa kabel sareng pemasanganna sacara rutin pikeun ningali tanda-tanda karusakan, karusakan, atanapi sambungan anu leupas. Atasi masalah naon waé kalayan gancang.
• Apdet parangkat lunak: Keep your Ring app and device firmware updated to ensure you have the latest features and security enhancements. Updates are typically managed through the Ring app.

Pamérésan masalah

If you encounter issues with your Ring Floodlight Wired, try the following troubleshooting steps:

• Henteu aya kakuatan: Check your circuit breaker to ensure power is supplied to the floodlight. Verify all wiring connections are secure.
• Lights Not Activating: Check motion detection settings in the Ring app. Ensure the light sensor threshold is set appropriately for current light conditions.
• Masalah konektipitas: Ensure your Ring Bridge is online and within range of the floodlight. Check your home Wi-Fi network. Restarting your router and Ring Bridge may resolve temporary issues.
• Motion Detection Too Sensitive/Insensitive: Adjust the motion sensitivity settings in the Ring app.
• Aplikasi Teu Ngabales: Close and reopen the Ring app. Ensure your smartphone's operating system is up to date.

For further assistance, refer to the "Help & FAQs" section within the Ring app or visit the Ring support websitus.

spésifikasi

• Lumen Kaluaran: 2,000 lumén
• Sumber Daya: Kabel anu dipasang (110-240V AC)
• Konektipitas: Requires Ring Bridge for smart features (connects via proprietary protocol to Bridge, Bridge connects to Wi-Fi)
• Deteksi gerak: Customizable sensitivity and zones
• Résistansi Cuaca: Designed for outdoor use, weather-resistant construction
• Perkiraan Umur: 25,000 jam
• Integrasi: Works with Amazon Sidewalk, Ring app, and Alexa-enabled devices

Garansi sareng Rojongan

Your Ring Floodlight Wired is covered by a limited warranty. For specific warranty details, please refer to the warranty information included in your product packaging or visit the official Ring websitus. Pikeun rojongan teknis, pendaptaran produk, atawa ngakses sumberdaya tambahan, mangga buka ring.com/support or contact Ring customer service directly.