Buku Panduan Pangguna Fluance RT82 Referensi High Fidelity Turntable

1. Bubuka

Welcome to the Fluance RT82 Reference High Fidelity Turntable user manual. This document provides essential information for the proper setup, operation, and maintenance of your new turntable. The Fluance RT82 is designed to deliver a pure analog listening experience with exceptional musical accuracy, featuring an Ortofon OM10 elliptical cartridge, speed control motor, and high-mass MDF wood plinth for superior vibration isolation.

Figure 1: Fluance RT82 Reference High Fidelity Turntable (Walnut)

2. Parentah Kasalametan penting

• Read these instructions thoroughly before operating the turntable.
• Tetep parentah ieu pikeun rujukan hareup.
• Heed sagala warnings on produk jeung dina parentah operasi.
• Turutan sadaya pitunjuk pikeun panggunaan sareng perawatan.
• Ulah make alat ieu deukeut cai atawa Uap.
• Ngabersihan ngan ku kaén garing.
• Ulah meungpeuk sagala bukaan ventilasi. Pasang saluyu sareng parentah produsén.
• Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
• Nangtayungan kabel listrik tina leumpang atawa diciwit, utamana dina colokan, wadah merenah, jeung titik dimana aranjeunna kaluar tina aparat.
• Ngan anggo kantétan/aksésori anu ditunjuk ku produsén.
• Cabut colokan alat ieu nalika badai kilat atanapi nalika henteu dianggo kanggo waktos anu lami.
• Rujuk sadayana ngalayanan ka tanaga jasa anu mumpuni. Pelayanan diperyogikeun nalika aparat parantos rusak sagala cara.

3. Eusi Paket

Pastikeun sadaya item anu didaptarkeun di handap aya dina pakét anjeun:

• RT82W Turntable
• Dust Cover + Hinges
• Tingkat gelembung
• Headshell with Ortofon OM 10 Cartridge
• Counterweight (CW02)
• Metal Platter with Belt
• Karét Platter Mat
• 5ft 100 - 240 V (50/60Hz) AC Power Adapter
• 3ft 90pF RCA Cable (CW03)
• 3ft Ground Wire (GW03)
• 45 adaptor
• Motor Katrol Cap
• Manual pamaké
• Sarung Katun

angka 2: komponén kaasup

4. Setup Guide

4.1. Platter jeung Beubeur Instalasi

1. Carefully place the metal platter onto the spindle located in the center of the turntable.
2. Align the red ribbon with the motor pulley.
3. Lift the red ribbon and pull the rubber belt over the motor pulley.
4. Once the belt is wrapped around the pulley, remove the ribbon.
5. Rotate the platter a couple of times clockwise to ensure the belt is properly seated and not twisted.
6. Place the rubber platter mat over the platter.

Video 1: Fluance Reference Series Turntable First Time Setup (Installation of Platter and Belt)

Angka 3: Ngabeledug View of Turntable Components

4.2. Counterweight and Headshell Installation

1. Slide the counterweight onto the back of the tonearm with the numbers facing forward. Push until it clicks into place.
2. Attach the headshell (with the Ortofon OM10 cartridge pre-installed) to the tonearm. Turn the locking nut until it sits firmly in place.

Figure 4: Ortofon OM10 Cartridge

4.3. Balancing the Tonearm

Proper tonearm balance is crucial for optimal sound clarity and to minimize wear on your records and stylus.

1. Cabut pelindung stylus.
2. Unlock the tonearm using the tonearm lock.
3. Lift the cueing lever.
4. Posisikeun tonearm dina piring.
5. While holding the headshell, lower the cueing lever without letting the needle touch the platter.
6. Turn the counterweight until the tonearm floats parallel to the mat. It should be as level as possible.
7. Once balanced, return the tonearm to the tonearm rest and lock it in place.

4.4. Setting Tracking Force and Anti-Skating

This is an important step for proper playback and stylus longevity.

1. Turn only the counterweight indicator ring to '0' on the center line. Do not turn the entire counterweight.
2. Turn the entire counterweight counter-clockwise until the number '2' is on the center line. This sets the tracking force to 2 grams, which is optimal for the Ortofon OM10 cartridge.
3. Locate the small anti-skating dial next to the tonearm base. Set this dial to '2', matching the tracking force.

Video 2: Fluance Reference Series Turntable First Time Setup (Balancing Tonearm and Setting Tracking Force/Anti-Skating)

4.5. Leveling the Turntable

Use the included bubble level to ensure your turntable is perfectly level for optimal performance. Adjust the turntable's feet as needed.

Figure 5: High Mass MDF Wood Plinth and Isolation Feet

4.6. Nyambungkeun ka an Amplifier (Phono Preamp Teu Kalebet)

The Fluance RT82 does not include a built-in phono preamplifier. You will need an external phono preamplifier to connect your turntable to an amplifier or powered speakers. Connect the RCA cables from the turntable to the PHONO input of your preamplifier, and then from the preamplifier's output to an available line-level input (e.g., AUX, CD) on your amplifier or powered speakers. Connect the ground wire from the turntable to the ground terminal on your preampliifier atawa amppangagung.

Video 3: How to Connect a Fluance Turntable to a Stereo Amppangagung

5. Parentah Operasi

5.1. Power On/Off and Speed Selection

The control knob on the front left of the plinth manages power and speed selection.

• Turn the knob to '33' for 33 1/3 RPM records.
• Turn the knob to '45' for 45 RPM records.
• Turn the knob to 'OFF' to power off the turntable.

Figure 6: Speed Control Motor

5.2. Maén Rékor

1. Teundeun catetan dina piring.
2. Select the appropriate speed (33 or 45 RPM) using the control knob.
3. Angkat tonearm ngagunakeun uas cueing.
4. Carefully move the tonearm over the desired starting groove of the record.
5. Slowly lower the cueing lever to gently place the stylus onto the record.

5.3. Ngeureunkeun Playback

1. Angkat tonearm ngagunakeun uas cueing.
2. Pindahkeun tonearm deui ka sésana tonearm.
3. Turunkeun tuas isyarat.
4. Lock the tonearm in place using the tonearm lock.
5. Turn the speed control knob to 'OFF'.

6. Pangropéa

6.1. beberesih

• Panutup lebu: Anggo kaén anu lembut sareng garing pikeun ngabersihan panutup lebu. Ngahindarkeun cleaners abrasive.
• Alas: Wipe the wood plinth with a soft, slightly damp lawon. Ulah make bahan kimia kasar.
• Stylus: Gently brush the stylus from back to front using a soft stylus brush. Use a dedicated stylus cleaning fluid if necessary.
• Catetan: Keep your records clean using a record brush or cleaning kit to prevent dust buildup and improve sound quality.

6.2. Stylus ngagantian

The Ortofon OM10 stylus has a lifespan that varies depending on usage. Replace the stylus when you notice a degradation in sound quality or after approximately 1000 hours of playback. Refer to Ortofon's guidelines for specific replacement instructions for the OM10 stylus.

7. Cara ngungkulan

8. Spésifikasi

Figure 7: Turntable Dimensions

9. Garansi jeung Rojongan

The Fluance RT82 Turntable comes with a 2 Year Manufacturer's Direct Warranty. Fluance also provides Rojongan Palanggan Hirupna. For any inquiries or assistance, please refer to the contact information provided in your product packaging or visit the official Fluance websitus.