1. Parentah Kasalametan penting
Please read all instructions carefully before operating the MXBAOHENG Electric Grain Grinder Mill. Retain this manual for future reference. Failure to follow these safety guidelines may result in electric shock, fire, or serious injury.
- Kasalametan listrik: Pastikeun catu daya voltage matches the 220V rating of the grinder. Do not operate with wet hands or in damp environments. Always unplug the grinder before cleaning, maintenance, or if not in use.
- Kasalametan sabeulah: The grinding blades are extremely sharp. Exercise extreme caution when handling or cleaning the grinding chamber. Never insert fingers or other objects into the grinding chamber while the machine is connected to power.
- Perlindungan overheating: The grinder is equipped with an overload protector. If the motor stops due to overheating or overload, allow it to cool down for at least 10-15 minutes before attempting to restart.
- Pamakéan ditangtoskeun: This appliance is designed for grinding dry grains, spices, herbs, and similar materials. Do not use it for wet, oily, or excessively hard materials that may damage the blades or motor.
- Barudak jeung Pets: Keep the grinder out of reach of children and pets. Do not allow them to operate or play with the appliance.
- Ventilasi: Ensure adequate ventilation around the motor during operation to prevent overheating. Do not block the thermovent.
2. Produk Langkungview jeung Komponén
Familiarize yourself with the various parts of your MXBAOHENG Electric Grain Grinder Mill for optimal operation.
Gambar 1: Labeled diagram of the MXBAOHENG Electric Grain Grinder Mill, showing components such as the handle, uncapping switch, upper cover, grinding groove, grinding blade, bearing pedestal, motor, thermovent, carbon brush, overload protector, switch, and base with shockproof foot pads.
Gambar 2: Diwincik view of key features including the clip-on switch design for the lid, the sharp grinding blade, the external carbon brush for easy replacement, the built-in bulge design within the grinding chamber, and the timing switch for precise grinding control.
Komponén konci:
- cecekelan: For easy carrying and positioning.
- Uncapping Switch: Safety mechanism to prevent operation when the lid is open.
- Upper Cover: Secures the grinding chamber.
- Grinding Groove: The chamber where materials are placed for grinding.
- Sabeulah grinding: High-speed rotating blades for pulverizing materials.
- Bearing Pedestal: Supports the grinding mechanism.
- Motor: The power unit for the grinding action.
- Thermovent: Vents for heat dissipation from the motor.
- Carbon Brush: Electrical contact for the motor, replaceable.
- Overload pelindung: Safety feature to prevent motor damage from excessive load or heat.
- Pindah: Kontrol daya utama.
- Timing switch: Allows setting a specific grinding duration.
- Dasar: Nyadiakeun stabilitas pikeun unit.
- Shockproof Foot Pads: Reduces vibration and protects surfaces.
3. Setélan
- Ngabongkar bungkusan: Carefully remove the grinder from its packaging. Inspect for any damage during transit. Retain packaging for potential future transport or storage.
- panempatan: Place the grinder on a stable, flat, and dry surface. Ensure there is sufficient space around the unit for ventilation, especially near the thermovent.
- Bersihan awal: Sateuacan dianggo anu munggaran, usap bagian luarna ku adamp cloth. Clean the grinding chamber and blades with a dry brush or cloth to remove any manufacturing residues. Do not wash the main unit with water.
- Sambungan Daya: Confirm your electrical outlet provides 220V. Plug the power cord into a grounded 220V outlet.
4. Parentah Operasi
Persiapan:
- Ensure the grinder is unplugged and the grinding chamber is clean and dry.
- Open the upper cover by releasing the uncapping switch.
- Place the dry material to be ground into the grinding chamber. Do not overfill; the maximum capacity is 500g. For best results, fill to approximately 2/3 of the chamber volume.
- Close the upper cover securely until the uncapping switch locks into place. The grinder will not operate if the cover is not properly secured.
Prosés grinding:
- Plug the grinder into the 220V power outlet.
- Set the desired grinding time using the timing switch. The grinding time will vary depending on the material and desired fineness. Start with short intervals (e.g., 30 seconds) and check the consistency.
- Press the main switch to start the grinding process. The blades will rotate at high speed.
- Monitor the grinding process. For very fine powder, multiple short grinding cycles with brief pauses may be more effective than one long cycle, allowing the motor to cool and preventing overheating.
- Once the set time expires or the desired fineness is achieved, the grinder will stop.
- Cabut coét tina stop kontak listrik.
- Carefully open the upper cover and remove the ground material. Use a brush to help clear the chamber.
Gambar 3: Visual examples demonstrating the grinding capability of the machine, showing various materials like roots and spices before and after being processed into a fine powder.
Gambar 4: Illustrates the versatility of the grinder for different applications, including grinding various herbs, spices, and grains, showcasing the types of materials suitable for processing.
5. Pangropéa
beberesih:
- Sok cabut coét sateuacan diberesihan.
- Use a dry brush or cloth to clean the grinding chamber and blades. Do not use water directly on the blades or inside the motor housing.
- Ngusap exterior mesin kalayan iklanamp lawon, teras garing garing.
- Pastikeun sadaya bagian tos garing sateuacan disimpen atanapi dianggo salajengna.
Ngagantian sikat karbon:
- The carbon brushes are consumable parts and may need replacement after extended use.
- Refer to Image 1 for the location of the external carbon brush.
- To replace, ensure the unit is unplugged. Unscrew the carbon brush caps on the side of the motor housing, remove the old brushes, and insert new ones. Secure the caps tightly.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Grinder teu bisa dihurungkeun | Teu plugged di; Kakuatan anjeuntage; Upper cover not secured; Overload protector activated; Faulty switch. | Check power connection; Verify power supply; Ensure cover is locked; Allow unit to cool and reset overload protector; Contact support if switch is faulty. |
| kinerja grinding goréng | Overfilling the chamber; Material too hard/wet; Worn blades; Insufficient grinding time. | Reduce material quantity; Ensure materials are dry and suitable; Inspect and replace blades if necessary; Increase grinding time or perform multiple cycles. |
| Unit overheats and stops | Continuous operation for too long; Overload; Blocked thermovent. | Allow unit to cool down for 10-15 minutes; Reduce load; Ensure thermovent is clear. |
| Noise atawa geter kaleuleuwihan | Unstable surface; Loose components; Damaged motor bearings. | Place on a stable surface; Check for loose parts and tighten; Contact support for bearing issues. |
7. Spésifikasi
Gambar 5: Diagram illustrating the dimensions of the MXBAOHENG Electric Grain Grinder Mill. The grinding chamber has a diameter of 15cm and a height of 12cm. The overall height of the unit is 38cm, and the base width is 16cm.
- merek: MXBAOHENG
- model: 500g Electric Grain Grinder Mill
- Kapasitas: 0.5 Kilogram (500g)
- Voltage: 220 volt
- Pamakéan anu disarankeun: Grinding dry grains, spices, herbs
- ASIN: B07KG6ZFPL
- Pabrikan: MXBAOHENG
- Ukuran (Perkiraan): Grinding Chamber Diameter: 15cm, Grinding Chamber Height: 12cm, Overall Height: 38cm, Base Width: 16cm.
8. Garansi jeung Rojongan
For warranty information or technical support, please refer to the purchase documentation or contact your retailer. Specific warranty terms may vary by region and seller.
No official product videos were provided for this model in the available data.