ROBOTIME ROKR T-Rex Dinosaur Walking Mechanical Wooden Model Kit D210

Bubuka

Welcome to the instruction manual for your ROBOTIME ROKR T-Rex Dinosaur Walking Mechanical Wooden Model Kit. This kit provides an engaging and educational experience, allowing you to construct a detailed, walking mechanical T-Rex model from precision-cut wooden pieces. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building process.

Image: The fully assembled ROBOTIME ROKR T-Rex mechanical wooden model.

Émbaran Kasalametan

Mangga perhatikeun pancegahan kaamanan di handap ieu:

• This product contains small parts and is not suitable for children under 3 years due to choking hazards.
• Pangawasan déwasa disarankeun nalika ngarakit, khususna pikeun tukang anu langkung ngora.
• Handle wooden pieces carefully to avoid splinters.
• Keep away from open flames or excessive heat.
• Do not force pieces together; if a piece does not fit, re-check the instructions.

Eusi pakét

Before starting assembly, please verify that all components are present:

• Pre-cut wooden sheets with model parts.
• Buku pituduh.
• Small accessories (e.g., gears, shafts, springs, sandpaper, wax, screwdriver if applicable).

Image: The retail packaging for the ROBOTIME ROKR T-Rex D210 model kit.

Parentah Majelis

Follow these steps carefully to assemble your T-Rex model. Refer to the diagrams in your physical instruction booklet for detailed visual guidance.

1. Persiapan: Carefully remove all wooden pieces from their sheets. Use the included sandpaper to smooth any rough edges if necessary. Identify all parts according to the numbering in the instruction booklet.
2. Majelis Dasar: Begin by assembling the base structure of the T-Rex, typically starting with the main body frame. Ensure all interlocking tabs fit snugly.
3. Legs and Tail: Attach the leg mechanisms and tail sections. Pay close attention to the orientation of gears and connecting rods for proper walking motion. Lubricate moving parts with the provided wax as instructed.
4. Head and Jaws: Assemble the head, including the jaw mechanism. Ensure the roaring function (if applicable) is correctly integrated.
5. Motor and Wiring (if applicable): If your model includes an electric motor, carefully follow the wiring diagrams to connect it to the battery compartment and internal mechanisms. Ensure correct polarity.
6. Majelis ahir: Connect all major sections. Test the movement of joints and gears as you proceed to ensure smooth operation.
7. Uji coba: Once fully assembled, test the walking and roaring functions. If the model does not move smoothly, re-check the connections and ensure all parts are properly aligned and lubricated.

Catetan: The complexity level for this model is indicated as Level: ★★★☆☆ and it contains 85 sapotong, suggesting a moderate challenge suitable for ages 12+.

Parentah Operasi

Once assembled, your ROBOTIME ROKR T-Rex is ready for action:

• Sumber Daya: Insert the required batteries (not included) into the designated battery compartment, observing correct polarity.
• Aktipkeun: Locate the power switch, usually on the base or side of the model. Flip the switch to the "ON" position.
• Walking Function: The T-Rex should begin to walk forward. If movement is erratic, ensure it is on a flat, smooth surface.
• Roaring Function: The model is designed to roar. This function is typically synchronized with its movement or activated by a specific sensor (e.g., clapping, as suggested by the box art). Clap your hands near the model to activate the roaring sound.
• Nonaktipkeun: To turn off the model, flip the power switch to the "OFF" position. Remove batteries if storing for extended periods.

Pangropéa

To ensure the longevity and smooth operation of your wooden model:

• beberesih: Dust the model regularly with a soft, dry cloth. Do not use water or chemical cleaners, as they may damage the wood.
• Lubrication: Periodically apply a small amount of the provided wax (or a suitable alternative like paraffin wax) to moving wooden gears and joints to maintain smooth operation.
• Panyimpenan: Store the model in a dry place away from direct sunlight and extreme temperature fluctuations to prevent warping or damage to the wood.
• Perawatan batré: Remove batteries if the model will not be used for an extended period to prevent leakage.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

For any questions regarding assembly, missing parts, or operational issues, please contact ROBOTIME customer support. While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects.

Please visit the official ROBOTIME website or refer to the contact information provided on the product packaging for assistance.

Catetan: Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.