1. Bubuka
Thank you for choosing the Joy-it JT-DPS5015 Lab Power Supply. This device is a high-performance, adjustable DC power supply designed for various laboratory, educational, and industrial applications. It offers precise control over output voltage and current, with a maximum output of 50V and 15A, totaling 750W. This manual provides essential information for the safe and efficient operation of your power supply.
Produk Leuwihview
The JT-DPS5015 features a clear display for voltage, current, and power, along with intuitive controls for setting parameters. Its compact design and robust construction ensure reliability and ease of use in various environments.
Fitur konci
- Adjustable Output: 0-50V, 0-15A
- Daya Kaluaran maksimum: 750W
- High-resolution display for voltage, ayeuna, jeung kakuatan
- Langkung Voltage Protection (OVP) and Over Current Protection (OCP)
- Desain kompak sareng awét
2. Parentah Kasalametan
Mangga baca sareng pahami sadaya pitunjuk kaamanan sateuacan ngoperasikeun alat ieu. Upami henteu nuturkeun pitunjuk ieu, tiasa nyababkeun sengatan listrik, kahuruan, atanapi karusakan kana produk.
- Sumber Daya: Ensure the input power source matches the specifications required by the device. Incorrect voltage tiasa nyababkeun karusakan.
- Ventilasi: Ulah ngahalangan liang ventilasi. Aliran hawa anu cekap penting pisan pikeun nyegah panas teuing.
- Lingkungan: Operate the device in a dry, well-ventilated area, away from direct sunlight, high temperatures, humidity, and corrosive gases.
- Grounding: Always ensure proper grounding to prevent electric shock.
- Konéksi Kaluaran: Connect the load to the output terminals only when the power supply is off or the output is disabled. Ensure correct polarity.
- Pangropéa: Ulah nyobian muka atawa ngalereskeun alat sorangan. Rujuk sadayana jasa ka tanaga anu mumpuni.
- Kontak cair: Avoid contact with liquids. Do not operate the device with wet hands.
3. Eusi Paket
Pastikeun yén sadaya barang aya sareng dina kaayaan anu saé nalika ngabongkar.
- 1 x Joy-it JT-DPS5015 Lab Power Supply Unit
- 1 x Manual Pamaké (dokumén ieu)
4. Setélan
Follow these steps to set up your Joy-it JT-DPS5015 Lab Power Supply.
- panempatan: Place the power supply on a stable, flat surface with adequate ventilation around the unit.
- Sambungan Daya Input: Connect the appropriate power cable to the input terminal of the power supply. Ensure the power cable is securely connected to a grounded AC outlet.
- Output Load Connection: With the power supply turned off and output disabled, connect your load to the output terminals. Ensure correct polarity: positive (+) to positive, negative (-) to negative. Use appropriate gauge wires for your application.
Gambar: Tukangeun view of the JT-DPS5015 unit, illustrating the input power socket and the screw terminals for connecting the output load. This image helps users correctly identify and connect power and load cables.
5. Parentah Operasi
This section details how to operate your power supply.
5.1 Panel hareup Leuwihview
Image: Front panel of the JT-DPS5015, highlighting the digital display for voltage, current, and power, along with the control buttons and rotary encoder for parameter adjustment. This visual aid helps users locate and understand the function of each control element.
- tampilan: Némbongkeun volum kaluaran sacara real-timetage, ayeuna, jeung kakuatan.
- Voltage/Current Knobs: Used to adjust the desired output voltage jeung wates ayeuna.
- Tombol Kaluaran ON/OFF: Toggles the power output to the load.
- Tombol Setel: Asupkeun mode setelan parameter.
5.2 Operasi Dasar
- Daya Hurung: Turn on the main power switch. The display will illuminate.
- Atur Voltage: Paké voltage adjustment knob to set the desired output voltage. Observe the display for the set value.
- Atur Wates Ayeuna: Use the current adjustment knob to set the maximum allowable output current. This acts as a current limit for your load.
- Aktipkeun Kaluaran: Press the 'Output ON/OFF' button to enable the power output to your connected load. The output indicator will light up.
- Disable Output: To safely disconnect or adjust the load, press the 'Output ON/OFF' button again to disable the output.
5.3 Fitur panyalindungan
- Langkung Voltage Perlindungan (OVP): Lamun kaluaran voltage exceeds a preset limit, the power supply will automatically shut down the output to protect the connected load.
- Over Current Protection (OCP): If the output current exceeds the set current limit, the power supply will enter constant current mode or shut down the output, depending on the setting, to protect the load and the power supply itself.
6. Pangropéa
Pangropéa anu leres mastikeun umur panjang sareng operasi anu tiasa diandelkeun tina catu daya anjeun.
- beberesih: Cabut catu daya tina sumber daya utama sateuacan dibersihkeun. Anggo lawon anu lemes sareng garing pikeun ngusap bagian luarna. Entong nganggo pembersih atanapi pangleyur anu abrasif.
- Ventilasi: Regularly check that the ventilation openings are free from dust and debris. Use compressed air to clear any blockages if necessary.
- Panyimpenan: Upami henteu dianggo salami lami, simpen catu daya di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
7. Cara ngungkulan
Bagian ieu nyayogikeun solusi pikeun masalah umum anu anjeun tiasa patepang.
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Henteu aya kakuatan / tampilan pareum | Power cable not connected; Main power switch off; Blown fuse | Check power cable connection; Turn on main power switch; Check and replace fuse if necessary (by qualified personnel). |
| Teu aya kaluaran voltage/ayeuna | Output disabled; Output terminals incorrectly connected; OVP/OCP triggered | Press 'Output ON/OFF' button; Verify load connections and polarity; Check for short circuits or overloads, then reset. |
| Kaluaran voltage/current unstable | Poor load connection; Faulty load; Internal fault | Check and secure load connections; Test with a different load; Contact customer support if problem persists. |
| Overheating | Blocked ventilation; Excessive ambient temperature; Overload | Ensure clear ventilation paths; Operate in a cooler environment; Reduce load or operating time. |
8. Spésifikasi Téknis
Detailed specifications for the Joy-it JT-DPS5015 Lab Power Supply.
| Parameter | Nilai |
|---|---|
| Modél | JT-DPS5015 |
| merek | Joy-it |
| Kaluaran Voltage Rentang | 0 - 50 V |
| Kaluaran Range Ayeuna | 0 - 15 A |
| Daya Kaluaran | 750 W |
| Ukuran produk (L x W x H) | 6.7 x 9.1 x 4 cm |
| Item Beurat | 0.23 kg |
| Métode Cooling | Fan, Air |
| Fitur husus | Optional Communication Modules, OLED Display |
9. Émbaran jaminan
Joy-it products are manufactured to high-quality standards and are guaranteed against manufacturing defects for a specified period from the date of purchase. Please refer to your purchase documentation or the official Joy-it website for specific warranty terms and conditions applicable to your region. This warranty does not cover damage caused by misuse, unauthorized modification, accident, or operation outside the specified environmental conditions.
10. Rojongan Palanggan
If you encounter any issues or have questions regarding your Joy-it JT-DPS5015 Lab Power Supply that are not covered in this manual, please contact our customer support team. For the most up-to-date contact information, visit the official Joy-it websitus atanapi tingal bungkus produk anjeun.
Websitus: www.joy-it.net
Surélék: support@joy-it.net
