Artemide Tolomeo Mini 100W E26 Méja Lamp Manual pamaké

1. Bubuka

This manual provides comprehensive instructions for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. The Artemide Tolomeo Mini is designed for indoor use, offering adjustable illumination with its articulated aluminum arm and shade.

2. Émbaran Kasalametan

• Pastikeun lamp is connected to a power source within the specified voltagrentang e (120V).
• Do not exceed the maximum bulb wattage of 100W. Use an E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamp.
• Always disconnect the power before cleaning, performing maintenance, or replacing the bulb.
• Hindarkeun nempatkeun lamp in areas with excessive moisture or extreme temperatures.
• Entong nyobian ngarobih lampkomponén listrikna. Rujukkeun jasa ka tanaga anu mumpuni.
• Tetep lamp jauh tina bahan anu gampang kaduruk.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian assembly:

• Artemide Tolomeo Mini Lamp Arm and Head Assembly
• Dasar Aluminium
• ngiuhan
• Kabel listrik

Image 3.1: All components of the Artemide Tolomeo Mini Table Lamp, including the articulated arm, lamp head, base, and power cord.

4. Parentah Setup

1. Ngabongkar komponén: Cabut sadaya bagian tina bungkusna kalayan ati-ati teras tempatkeun dina permukaan anu bersih sareng rata.
2. Pasang Dasar: Gantelkeun aman lamp's articulated arm assembly to the aluminum base. Ensure the connection is firm and stable.
3. Pasang bohlam: Insert an E26 (medium base) A19 compatible bulb (not included) into the lamp head socket. Do not exceed 100W.
4. Posisi Lamp: Teundeun lamp dina stabil, permukaan datar.
5. Sambungkeun Kakuatan: Colokkeun kabel listrik kana stop kontak 120V standar.

Image 4.1: The Artemide Tolomeo Mini Table Lamp fully assembled and ready for use.

5. Parentah Operasi

• Hurungkeun/Pareuman: Anu lamp features an On/Off switch located on the lamp head. Press or touch the switch to turn the light on or off.
• Nyaluyukeun Posisi: Anu lamp's arm structure, made of extruded aluminum, and joints with tension control knobs allow for full adjustability. Gently manipulate the arm and head to direct light as desired. The shade offers 360-degree rotation.

6. Pangropéa

• beberesih: Pegatkeun sambungan lamp from power. Use a soft, dry cloth to wipe down the aluminum surfaces and shade. Avoid abrasive cleaners or solvents.
• Ngagantian bohlam: Pastikeun lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 (medium base) A19 compatible bulb, not exceeding 100W.
• Tegangan gabungan: The tension control knobs on the joints can be adjusted if the arm becomes too loose or too stiff. Turn clockwise to tighten, counter-clockwise to loosen.

7. Cara ngungkulan

Lamp teu hurung:

Check if the power cord is securely plugged into the outlet and the lamp. Verify that the bulb is correctly installed and not burnt out. Test the outlet with another device.

Lampu kedip-kedip:

Ensure the bulb is screwed in tightly. If using an LED bulb, confirm it is dimmable if connected to a dimmer switch (though this lamp has an On/Off switch on the head). Try a different bulb.

Arm does not hold position:

Adjust the tension control knobs on the joints. Tighten them slightly until the arm holds its desired position.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information, product support, or to inquire about replacement parts, please contact Artemide directly through their official website or customer service channels. Specific warranty terms and conditions may vary and are provided by the manufacturer.