ASUS Prime Z390-A Motherboard Instruction Manual

1. Bubuka

The ASUS Prime Z390-A Motherboard is engineered for 8th and 9th generation Intel Core processors, offering a robust platform for high-performance computing. This manual provides essential information for the proper installation, operation, and maintenance of your motherboard, ensuring stable and efficient system performance.

2. Eusi Paket

Pariksa yén sadaya item aya dina pakét motherboard anjeun:

• PRIME Z390-A motherboard
• Kabel Serial ATA 6.0Gb/s (3)
• SLI™ HB Bridge (2-WAY-M)
• ASUS Q-Shield
• Konektor-Q
• M.2 pakét screw
• CPU FAN Holder
• Dukung DVD
• manual pamaké

3. Fitur konci

• Rojongan prosésor: Designed for 9th and 8th generation Intel Core processors, maximizing connectivity and speed.
• Optimasi Mémori: Features M.2, USB 3.1 Gen2, and ASUS OptiMem II for improved DRAM overclocking stability.
• Optimasi 5-Jalur: AI overclocking and dynamic fan calibration for balanced performance.
• Daya tahan ditingkatkeun: 5X Protection III with SafeSlot Core, LANGuard, and Overvoltage Protection ensures longevity and reliability.
• Pendinginan Lanjutan: FanXpert 4 delivers advanced fan control for dynamic system cooling.
• Fortified PCIe Slots: Patent-pending SafeSlot Core prevents damage from heavyweight GPUs.
• Audio Definisi Luhur: 8-channel HD Gaming Audio featuring Realtek ALC887 codec.
• Pencahayaan anu tiasa disaluyukeun: Aura Sync RGB with addressable headers for personalized aesthetics.

4. Setup jeung Instalasi

Follow these steps for proper installation of your ASUS Prime Z390-A Motherboard into your PC case.

4.1 Motherboard Leuwihview

Gambar ieu nunjukkeun ti luhur ka handap view of the ASUS Prime Z390-A Motherboard, highlighting the CPU socket, RAM slots, PCIe slots, and various headers.

4.2 Masang CPU

Carefully open the CPU socket lever, align the CPU with the socket's notch, and gently place it into the socket. Close the lever to secure the CPU. Ensure the CPU is correctly oriented to avoid damage.

A nutup-up view of the LGA1151 CPU socket and the four DDR4 RAM slots on the motherboard.

4.3 Installing RAM

Open the clips on the DDR4 memory slots. Align your RAM modules with the slots, ensuring the notch on the module matches the slot. Press firmly on both ends until the clips snap into place. Refer to your motherboard manual for recommended dual-channel configurations.

4.4 Installing M.2 Drives

Locate the M.2 slots on the motherboard. Remove the M.2 screw and standoff. Insert your M.2 drive at an angle into the slot, then push it down and secure it with the screw. The Prime Z390-A features dual M.2 slots for high-speed storage.

4.5 Installing Graphics Card and Other PCIe Devices

Insert your graphics card into the primary PCIe x16 slot (usually the top one). Ensure it is seated firmly and secure it with the case screw. Install any other PCIe expansion cards into the available slots as needed.

4.6 Nyambungkeun Power Supply

Connect the 24-pin ATX power connector and the 8-pin (or 4+4-pin) CPU power connector from your power supply to the corresponding ports on the motherboard. Connect SATA power cables to your storage drives and PCIe power cables to your graphics card.

4.7 Connecting Front Panel and I/O

Connect the front panel headers (power switch, reset switch, HDD LED, power LED) to the motherboard. Connect USB 2.0, USB 3.0, and audio headers. Finally, connect your monitor to the graphics card or the motherboard's integrated graphics ports (DisplayPort, HDMI).

This image displays the rear I/O panel of the ASUS Prime Z390-A Motherboard, showing various ports including USB, Ethernet, DisplayPort, HDMI, and audio jacks.

5. Parentah Operasi

5.1 Mimiti boot jeung BIOS Setup

Upon first power-on, your system will likely enter the BIOS (Basic Input/Output System). Here, you can configure boot order, enable XMP for RAM, adjust fan curves, and perform initial system checks. Save and exit the BIOS to proceed with operating system installation.

5.2 Pamasangan Supir

After installing your operating system, install the necessary drivers from the included support DVD or download the latest versions from the ASUS official website. Key drivers include chipset, LAN, audio, and graphics drivers for optimal performance and functionality.

5.3 ASUS AI Suite 3 and Aura Sync

Utilize ASUS AI Suite 3 for system monitoring, fan control, and AI overclocking. For customizable RGB lighting, use the Aura Sync software to synchronize lighting effects across compatible components connected to the motherboard's RGB headers.

6. Pangropéa

Regular maintenance ensures the longevity and stable performance of your motherboard and PC system.

• Ngaleungitkeun lebu: Périodik ngabersihan lebu tina motherboard, cooler CPU, sareng kipas kasus nganggo hawa anu dikomprés. Pastikeun sistem dipareuman sareng dicabut colokan sateuacan beberesih.
• Pembaruan BIOS: Pariksa dukungan ASUS website for the latest BIOS updates. BIOS updates can improve compatibility, stability, and performance. Follow the update instructions carefully.
• Pembaruan supir: Keep all system drivers updated to ensure compatibility and optimal performance with new software and hardware.
• Manajemén Kabel: Pastikeun kabel internal diurus kalayan rapih pikeun ningkatkeun aliran hawa sareng nyegah gangguan.

7. Cara ngungkulan

Bagian ieu ngabahas masalah umum anu anjeun tingali:

8. Spésifikasi

9. Garansi jeung Rojongan

Kanggo inpormasi garansi anu lengkep, mangga tingali kartu garansi anu kalebet dina bungkusan produk anjeun atanapi kunjungi dukungan resmi ASUS. websitus. ASUS nyayogikeun dukungan téknis sareng sumber daya anu lengkep pikeun produkna.

You can find additional support, driver downloads, and FAQs on the Toko ASUS di Amazon.