KMC 6908923404490

KMC 1-Foot 3-Prong Power Extension Cord (10-Pack) User Manual

1. Bubuka

This manual provides essential information and instructions for the safe and effective use of your KMC 1-Foot 3-Prong Power Extension Cord (10-Pack). These extension cords are designed to maximize the utility of power strips and wall outlets by providing a short, flexible extension, especially useful for bulky power adapters.

Each cord features a 45-degree angled plug for space-saving and is constructed with 16 AWG wire for enhanced safety and reliability. The product is ETL listed, ensuring adherence to industry safety and quality standards. These cords are suitable for both indoor and outdoor applications.

KMC 1-Foot 3-Prong Power Extension Cord

Image 1.1: A single KMC 1-Foot 3-Prong Power Extension Cord, showcasing its compact design and 3-prong male and female ends.

2. Émbaran Kasalametan

  • ETL Certified: This product is ETL listed, indicating it meets recognized safety standards.
  • Kapasitas dipeunteun: Do not exceed the maximum rated capacity of 1625 Watts (13 Amps at 125 Volts) for any single cord or the combined load on the connected outlet/power strip. Overloading can cause overheating and fire hazards.
  • Pamakéan Indoor/Outdoor: These cords are designed for both indoor and outdoor use. Ensure connections are secure and protected from excessive moisture when used outdoors.
  • Gauge Kawat: Constructed with 16 AWG (American Wire Gauge) wire, which is thicker and safer for handling higher amperage compared to thinner 18 AWG wires.
  • Daya tahan bahan: The cord resists moisture, abrasion, and exposure to sunlight, contributing to its longevity and safety.
  • Bahan Tahan seuneu: Made with VO rate green ABS flame retardant materials that meet the ROHS standard, enhancing fire safety.
  • Pamariksaan: Always inspect cords for damage (frayed wires, cracked insulation, bent prongs) before each use. Do not use damaged cords.
  • Grounding: The 3-prong design provides grounding for safety. Do not remove or bypass the ground prong.
High precision copper wire core and flame retardant materials

Image 2.1: Illustration of the high precision copper wire core and flame retardant materials used in the KMC extension cords, highlighting safety and durability features.

3. Setélan

The KMC 1-Foot 3-Prong Power Extension Cords are designed for immediate use with minimal setup.

  1. Ngabongkar: Carefully remove the 10-pack of extension cords from their packaging.
  2. mariksa: Before first use, visually inspect each cord for any signs of damage, such as cuts, abrasions, or bent prongs. Do not use any cord that appears damaged.
  3. Identify Ends: Each cord has a male (plug) end with three prongs and a female (socket) end with three corresponding holes.
Ten KMC 1-Foot 3-Prong Power Extension Cords arranged in a circle

Image 3.1: The KMC 1-Foot 3-Prong Power Extension Cord 10-pack, showing multiple cords ready for deployment.

4. Parentah Operasi

These extension cords are designed to provide flexible power access and optimize outlet usage.

  1. Nyambung kana Sumber Daya: Plug the male end of the KMC extension cord into a standard 3-prong wall outlet or power strip. The 45-degree angled plug design allows for efficient use of adjacent outlets, preventing blockage by bulky adapters.
  2. Sambungkeun Alat: Plug your appliance or device's power cord into the female end of the KMC extension cord. Ensure a firm and secure connection.
  3. Space-Saving Benefit: The short length and angled plug are ideal for situations where large power bricks or adapters would otherwise block multiple outlets on a power strip or wall receptacle.
  4. Aplikasi: Suitable for various appliances and devices in homes, offices, garages, and outdoor settings, including mixers, electric tools, printers, device chargers, vacuum cleaners, microwaves, and hair dryers.
KMC extension cord plugged into a power strip, demonstrating space-saving

Image 4.1: A KMC extension cord plugged into a power strip, illustrating how its 45-degree angled plug maximizes outlet usage by allowing other plugs to fit alongside it.

Diagram showing various appliances connected to KMC extension cords

Image 4.2: A visual representation of common applications for the KMC extension cords, including mixers, electric tools, printers, device chargers, vacuum cleaners, microwaves, and hair dryers.

Video 4.3: An official video demonstrating the features and benefits of the KMC Power Extension Cable, including its space-saving design and durable construction.

5. Pangropéa

Proper maintenance ensures the longevity and safe operation of your KMC extension cords.

  • Inspeksi rutin: Periodically inspect the cords for any signs of wear, tear, or damage, especially before and after outdoor use. Check for cracks in the insulation, exposed wires, or loose connections.
  • beberesih: To clean the cord, first unplug it from all power sources and devices. Wipe the cord and plugs with a dry or slightly damp lawon. Entong neuleumkeun cai atanapi nganggo bahan kimia anu kasar.
  • Panyimpenan: When not in use, store the cords in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cord sharply, which can damage the internal wiring.
  • Hindarkeun Overstretching: Do not pull on the cord to unplug it from an outlet or device; always grasp the plug itself.

6. Cara ngungkulan

If you encounter issues with your KMC extension cord, consider the following troubleshooting steps:

  • Henteu Kakuatan pikeun Alat:
    • Ensure the extension cord is fully plugged into a working wall outlet or power strip.
    • Verify that the device is correctly plugged into the extension cord.
    • Check the circuit breaker for the outlet to ensure it hasn't tripped.
    • Test the device by plugging it directly into a known working outlet.
  • Kabel Panas Kalangkung:
    • Immediately unplug the cord and all connected devices.
    • Ngurangan total wattage of devices connected to the cord. Ensure the total load does not exceed 1625 Watts (13 Amps).
    • Inspect the cord for any visible damage. If damaged, discontinue use.
  • Sambungan leupas:
    • Ensure all plugs are inserted firmly into their respective sockets. A loose connection can cause arcing and potential hazards.

If problems persist after following these steps, discontinue use and contact customer support.

7. Spésifikasi

Panjangna1 Foot (approximately 31 cm)
Gauge kawat16 AWG
Dipeunteun Power1625 Watt
Dipeunteun Ayeuna13 Amps
Dipeunteun Voltage125 volt
Frékuénsi60 Hz
Suhu Operasi-40 ℃ nepi ka + 40 ℃
Suhu Panyimpenan-10 ℃ nepi ka + 60 ℃
Kalembaban Gawé5%(0℃) to 90%(40℃)
BahanABS, PVC insulated
Format ColokkeunType B (3-prong grounded)
SertifikasiETL Didaptarkeun
Nomer modél6908923404490
Diwincik view of KMC extension cord with labels for components

Gambar 7.1: A lengkep view of the KMC extension cord, highlighting its triangular ground plug, three-polarized earth socket, heavy-duty molded end, PVC insulation, and thicker cable jacket, with a wire length of 31cm.

8. Émbaran jaminan

For specific warranty details regarding your KMC 1-Foot 3-Prong Power Extension Cord (10-Pack), please refer to the product packaging or the official KMC websitus. Sarat garansi biasana ngawengku cacad manufaktur sareng cacad bahan dina kaayaan panggunaan normal.

9. Rojongan Palanggan

If you have any questions, require technical assistance, or need to report an issue with your KMC product, please contact KMC customer support through their official websitus atanapi inpormasi kontak anu disayogikeun dina bungkus produk.

Dokumén Patali - 6908923404490

Praview Ranté Sapédah KMC sareng Komponén Drivetrain 2026
Jelajahi katalog produk KMC 2026 anu nampilkeun sajumlah komprehensif ranté sapédah, kalebet solusi khusus e-sapédah, téknologi DLC, X-Series, séri TT, sareng seueur deui. Manggihan chainrings cocog, sprockets, sarta parabot penting pikeun kinerja optimal sarta durability.
Praview KMC G37059-01A-TC Metal Storage Shed Installation Manual
Comprehensive installation manual for the KMC G37059-01A-TC Metal Storage Shed. Includes parts list, assembly instructions, and important preparation notes for a successful build.
Praview Polycarbonate Double Roof Gazebo G30036-04-LF Assembly Manual
Comprehensive assembly manual for the KMC G30036-04-LF Polycarbonate Double Roof Gazebo, including parts lists, tools required, safety warnings, and installation instructions.
Praview Wall Mounted Gazebo G30030BK02 Assembly Instructions and Manual
Comprehensive assembly manual for the KMC Wall Mounted Gazebo G30030BK02, including parts list, tools required, step-by-step instructions, safety precautions, and help center information.
Praview Metal Garden Shed G37009BK02-HJ/G37030BR02-HJ/IS302GR01-HJ Manual Instalasi
Buku Panduan ieu nyadiakeun parentah nu lengkep pikeun assembly tur pamasangan Metal Garden héd model G37009BK02-HJ, G37030BR02-HJ, sarta IS302GR01-HJ. Éta kalebet daptar bagian, alat anu diperyogikeun, persiapan situs, sareng petunjuk léngkah-léngkah pikeun yayasan, kabinet, hateup, sareng pamasangan panto.
Praview KMC 03-Seri Kacang tukang gali-Shaker-Inverter Manual Operator urang
Manual operator pikeun mesin KMC 03-Series Peanut Digger-Shaker-Inverter (ranté & sabuk conveyor). Nyertakeun assembly, operasi, pangropéa, jeung ngungkulan pikeun model dipaké saméméh 2015.