Bubuka
This manual provides essential information for the installation, operation, and maintenance of the ESBE VTC422 DN25 Charging Valve. The VTC400 series is specifically designed for integration with buffer tanks in heating systems to ensure optimal performance and longevity.
Mangga baca manual ieu kalawan saksama sateuacan dipasang sareng dioperasikeun pikeun mastikeun panggunaan anu aman sareng leres.
Produk Leuwihview
The ESBE VTC422 DN25 is a thermostatic charging valve designed to protect boilers from low return water temperatures. It ensures that the boiler reaches a high operating temperature quickly, which helps to prevent tarring and extends the boiler's lifespan. This model features a G 1" connector and operates within a temperature range of 50-70 °C.
Gambar 1: ESBE VTC422 DN25 Charging Valve. This image shows the brass body of the valve with three threaded connections and a black plastic housing at the bottom containing the thermostatic element. The ESBE logo is visible on the side.
Parentah Kasalametan
- Always ensure the system is depressurized and cooled before attempting any installation or maintenance.
- Pamasangan kedah dilaksanakeun ku ahli anu mumpuni luyu sareng peraturan sareng standar lokal.
- Anggo alat pelindung diri (APD) anu pantes nalika pamasangan sareng pangropéa.
- Do not modify the valve or its components. Use only genuine ESBE spare parts.
- Ensure proper sealing of all connections to prevent leaks.
Setup sareng Instalasi
Cék Pra-instalasi
- Verify that the valve model (VTC422 DN25) and temperature range (50-70 °C) are suitable for your heating system and boiler.
- Inspect the valve for any visible damage before installation.
- Ensure all necessary tools and fittings (G 1" connectors) are available.
Léngkah-léngkah Instalasi
- Position the valve correctly in the heating circuit, typically on the return line to the boiler, before the buffer tank connection. Refer to the system's hydraulic diagram for precise placement.
- Connect the valve to the piping using appropriate G 1" fittings. Ensure connections are tight but do not overtighten.
- The valve has three ports: boiler return, buffer tank return, and boiler supply. Ensure correct flow direction as indicated on the valve body or in the system diagram.
- After installation, slowly fill the system and check for leaks at all connections.
- Bleed air from the system as per boiler manufacturer instructions.
Prinsip Operasi
The ESBE VTC422 DN25 is a thermostatic mixing valve that automatically regulates the temperature of the water returning to the boiler. When the boiler starts, the valve ensures that cold return water from the buffer tank is mixed with hot water from the boiler's flow, quickly raising the boiler's return temperature to the set point (50-70 °C). This prevents condensation and corrosion within the boiler.
Once the boiler reaches its operating temperature and the buffer tank is being charged, the valve gradually opens to allow more hot water from the boiler to flow into the buffer tank, while maintaining the minimum return temperature to the boiler.
Pangropéa
Cék biasa
- Periodically inspect the valve and connections for any signs of leaks or corrosion.
- Ensure the system pressure is within the recommended range.
beberesih
The valve is generally maintenance-free. If blockages or performance issues occur due to sediment, the system should be flushed. For internal cleaning or replacement of thermostatic elements, it is recommended to consult a qualified technician.
Ngaganti komponén
If the thermostatic element or other internal components require replacement, use only original ESBE spare parts. This procedure should be carried out by a trained professional.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Suhu balikna ketel handap teuing. | Valve not opening correctly, sediment buildup, incorrect installation. | Check system pressure, flush system, verify installation direction, consult technician. |
| Poor heat transfer to buffer tank. | Valve not opening fully, air in system, incorrect sizing. | Bleed air from system, verify valve operation, ensure correct valve sizing for application. |
| Bocor dina sambungan. | Loose fittings, damaged seals, incorrect thread sealant. | Tighten connections, replace seals, reapply thread sealant. |
For persistent issues, contact a qualified heating system technician or ESBE customer support.
spésifikasi
- model: ESBE VTC422 DN25
- Nomer Bagian: 51060600
- merek: ESBE
- Bahan: Logam (Kuningan)
- Jenis sambungan: G 1" (External Thread)
- Diaméter nominal (DN): 25
- Rentang Suhu: 50-70 °C
- Ukuran (L x W x H): 5.59 x 8.41 x 12.19 cm (kira-kira 5.6 x 8.4 x 12.2 cm)
- beurat: 771.11 gram (kira-kira 1.7 lbs)
- Jumlah Palabuhan: 3
- Finish Luar: Dicét
Garansi sareng Rojongan
For warranty information, please refer to the official ESBE website or contact your local ESBE distributor. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or further assistance, please visit the official ESBE website or contact their customer service department. Contact details can typically be found on the ESBE official websitus: www.esbe.eu
