Buku Panduan Pangguna Cisco Catalyst WS-C3650-24TS-E Network Switch

1. Bubuka

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Cisco Catalyst WS-C3650-24TS-E Network Switch. This device is a 24-port Gigabit Ethernet switch with 4x1G uplink ports, designed for enterprise-level networking environments requiring advanced IP services and scalability.

Mangga baca manual ieu sacara saksama sateuacan nyobian masang atanapi ngoperasikeun alat. Simpen manual ieu pikeun rujukan ka hareup.

2. Émbaran Kasalametan

Perhatikeun pancegahan kaamanan di handap ieu pikeun nyegah tatu sareng karusakan alat:

• Kasalametan listrik: Ensure the power source matches the device's requirements. Use only the provided power cord or an approved replacement.
• Grounding: Salawasna pastikeun alatna di-ground kalayan leres pikeun nyegah sengatan listrik.
• Ventilasi: Do not block ventilation openings. Ensure adequate airflow around the device to prevent overheating.
• Penanganan: The device can be heavy. Use proper lifting techniques or assistance when moving it.
• Lingkungan: Operate the device within specified temperature and humidity ranges. Avoid exposure to liquids or excessive dust.

3. Eusi Paket

Pariksa yén pakét anjeun ngandung barang-barang ieu:

• Cisco Catalyst WS-C3650-24TS-E Network Switch
• Kabel Daya AC
• Rack-mount Kit (brackets and screws)
• Kabel Konsol (RJ-45 ka DB-9)
• Dokuméntasi (Panduan Mimitian Gancang, Inpormasi Kasalametan)

Note: As a certified refurbished product, specific accessories may vary. Contact your vendor if any items are missing.

4. Pedaran Fisik

Gambar 1: Hareupeun view of the Cisco Catalyst WS-C3650-24TS-E Network Switch, showing 24 data ports and 4 uplink ports.

4.1 Panel payun

• 24 x 10/100/1000Base-T Ethernet Ports: RJ-45 connectors for network devices.
• 4 x 1G SFP Uplink Ports: For fiber optic or copper uplinks to other network devices.
• Indikator LED: System status, port status, and mode indicators.
• Tombol Mode: Used to cycle through LED modes.

4.2 Panel tukang

• Panyambung Daya AC: Pikeun nyambungkeun kabel listrik.
• Port Konsol (RJ-45): For local management and configuration via a terminal emulator.
• Port USB Tipe-A: For external storage or software updates.
• USB Mini-B Console Port: Aksés konsol alternatif.
• StackWise-160 Ports (Optional): For connecting multiple switches into a single logical unit (if stacking modules are installed).

5. Setélan

5.1 Rak Pamasangan

1. Pasangkeun braket rak anu disayogikeun kana sisi saklar nganggo sekrup anu kalebet.
2. Align the switch with the rack posts and secure it using appropriate rack screws. Ensure the switch is level and stable.

5.2 Nyambungkeun Daya

1. Sambungkeun kabel kakuatan AC ka konektor kakuatan dina panel pungkur saklar.
2. Colokkeun tungtung kabel listrik anu sanés ka stop kontak listrik AC anu dibumikeun.
3. The switch will power on automatically. Observe the System LED for boot-up status.

5.3 Nyambungkeun Kabel Jaringan

1. Connect Ethernet cables from your network devices (computers, servers, access points) to the 10/100/1000Base-T ports on the front panel.
2. For uplink connectivity, insert SFP transceivers into the 1G SFP uplink ports and connect appropriate fiber or copper cables to your core network or other switches.

5.4 Aksés Konfigurasi Awal

To configure the switch, you can use the console port:

1. Connect the RJ-45 end of the console cable to the switch's console port.
2. Connect the DB-9 end (or USB adapter) to your computer's serial port.
3. Open a terminal emulation program (e.g., PuTTY, Tera Term) on your computer and configure the serial port settings:
   • Laju Baud: 9600
   • Bit Data: 8
   • Parity: Euweuh
   • Ngeureunkeun Bit: 1
   • Kontrol Aliran: Euweuh
4. Press Enter to access the switch command-line interface (CLI).

6. Nyuping

6.1 Daya Hurung/Pareuman

The switch powers on automatically when connected to a power source. To power off, disconnect the power cord. For controlled shutdowns, use the appropriate CLI commands if the switch is actively managing network traffic.

6.2 Indikator LED

Awasi LED dina panel hareup pikeun ngartos status operasional saklar:

• Sistim LED:
  • Héjo (Padet): Sistem operasi normal.
  • Amber (Padet): System is booting or experiencing a fault.
• LED Status Port: Each data port has an LED indicating its status.
  • Héjo (Padet): Link ngadegkeun.
  • Héjo (Kedip-kedip): Kagiatan di palabuhan.
  • Pareum: No link or port disabled.
• Modeu LEDs: Indicate the current function of the port status LEDs (e.g., Speed, Duplex, PoE). Press the Mode button to cycle through these.

7. Pangropéa

7.1 beberesih

Regularly clean the exterior of the switch with a soft, dry, lint-free cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.

7.2 Apdet firmware

Pariksa périodik rojongan Cisco website for the latest firmware updates. Firmware updates can provide new features, performance improvements, and security patches. Follow Cisco's official documentation for the correct update procedure to avoid damaging the device.

7.3 Pertimbangan Lingkungan

Maintain the operating environment within the specified temperature and humidity ranges to ensure optimal performance and longevity of the switch.

8. Cara ngungkulan

This section addresses common issues you might encounter with the Cisco Catalyst WS-C3650-24TS-E switch.

8.1 Taya Daya

• Pariksa kabel listrik: Pastikeun kabel listrik disambungkeun sacara aman ka saklar sareng stopkontak.
• Pariksa Stop Kontak: Uji stop kontak nganggo alat anu sanés pikeun mastikeun éta tiasa dianggo.
• Sistim LED: If the System LED is off, there is no power. If it's amber, the system might be booting or in a fault state.

8.2 Taya Tumbu on Port

• Pariksa kabel: Ensure the Ethernet or fiber cable is properly connected at both ends. Try a different cable.
• Verifikasi Alat: Ensure the connected device (e.g., computer, server) is powered on and its network interface is active.
• Konfigurasi Port: Check the switch's configuration via the CLI to ensure the port is not administratively shut down or misconfigured.
• SFP Transceiver: For SFP ports, ensure the correct SFP transceiver is used and properly seated.

8.3 Masalah Konektipitas Jaringan

• Konfigurasi IP: Verify IP addresses, subnet masks, and gateway settings on connected devices and the switch.
• VLAN: If VLANs are configured, ensure devices are in the correct VLANs and trunk links are properly configured.
• Spanning Tree Protocol (STP): Check for STP blocking ports if unexpected network loops are present.
• Firmware: Ensure the switch is running stable and up-to-date firmware.

8.4 Reset pabrik

A factory reset will erase all configurations and restore the switch to its default settings. This should only be performed as a last resort after backing up any critical configurations. Consult Cisco documentation for the specific procedure to perform a factory reset via the console.

9. Spésifikasi

10. Garansi jeung Rojongan

10.1 Émbaran jaminan

This Cisco Catalyst WS-C3650-24TS-E device is a Certified Refurbished product. It is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with a minimum 90-day warranty provided by the seller.

Please refer to your purchase documentation for specific warranty terms and conditions provided by the refurbishing vendor.

10.2 Rojongan Téknis

For technical assistance, troubleshooting, or further information regarding your Cisco Catalyst WS-C3650-24TS-E switch, please contact your product vendor or refer to the official Cisco support resources available on their websitus (www.cisco.com/support). Ensure you have your product model and serial number ready when seeking support.