Buku Panduan Pangguna Osiloskop Panyimpenan Digital Tektronix TBS1032B

1. Bubuka

The Tektronix TBS1000B Series Digital Storage Oscilloscopes are designed for reliability, accuracy, usability, and affordability. They are ideal for various electronics applications, including product design and debugging, repair and servicing, and electrical engineering education. This manual provides essential information for setting up, operating, and maintaining your TBS1032B oscilloscope.

This model features a 7-inch WVGA (800x480) Active TFT Color Display, a maximum real-time sample rate of 500MS/s on all channels without interleaving, and a record length of 2.5kpts per channel for acquiring detailed waveforms. It also includes advanced triggers, UL certification, CE approval, and a CAT II 300V safety rating. The design incorporates no cooling fan, contributing to lower noise and higher reliability.

2. Naon dina Box

Upon unpacking your Tektronix TBS1032B oscilloscope, please verify that all the following items are included:

• Passive probes (one per channel)
• Kabel listrik
• NIM/NIST certificate of calibration
• Instalasi jeung kaamanan manual
• CD kalawan manual pamaké

3. Setélan

Follow these steps to set up your Tektronix TBS1032B oscilloscope for initial use:

1. panempatan: Place the oscilloscope on a stable, flat surface with adequate ventilation. Ensure there is enough space around the unit for proper airflow.
2. Sambungan Daya: Connect the provided power cord to the AC input on the rear panel of the oscilloscope and then to a grounded power outlet.
3. Daya Hurung: Press the power button located on the front panel. The oscilloscope will perform a self-test and display the startup screen.
4. Sambungan Probe: Connect the passive probes to the input channels (CH1, CH2) on the front panel. Ensure the probe compensation is correctly adjusted for accurate measurements. Refer to the probe's individual instructions for compensation procedures.
5. Konfigurasi awal: The oscilloscope may prompt you for initial language or time settings. Follow the on-screen instructions.

Katerangan Gambar: A hareup view of the Tektronix TBS1032B Digital Storage Oscilloscope, showcasing its display screen, control knobs, buttons, and input ports. This image illustrates the primary user interface and connection points.

4. Parentah Operasi

This section covers the basic operation of your TBS1032B oscilloscope.

4.1 Tampilan Gelombang Dasar

• Connecting a Signal: Connect the probe to the circuit point you wish to measure.
• AutoSet Function: Pencét éta AutoSet button. The oscilloscope will automatically adjust the vertical, horizontal, and trigger settings to display a stable waveform.
• Kontrol Vertikal: Ngagunakeun éta Posisi jeung Skala knobs for each channel (CH1, CH2) to adjust the vertical position and voltage per division.
• Kontrol Horisontal: Ngagunakeun éta Posisi jeung Skala knobs in the Horizontal section to adjust the horizontal position and time per division.

4.2 Nyimbulkeun

Triggering stabilizes repetitive waveforms and captures single-shot events.

• Tingkat pemicu: Saluyukeun Tingkat tombol pikeun nyetel voltage point on the waveform where the trigger occurs.
• Trigger Menu: Pencét éta ménu button in the Trigger section to access trigger settings such as Edge, Pulse, and Video triggers.
• Force Trig: Pencét Force Trig to force a trigger event, useful for single-shot acquisitions.

4.3 Pangukuran sareng Analisis

• Measure Menu: Pencét éta Ukur button to display automatic measurements like frequency, period, peak-to-peak voltage, RMS voltage, sareng seueur deui.
• FFT Function: Pencét éta FFT button to perform a Fast Fourier Transform on the input signal, allowing you to view its frequency components.
• Cursor Function: Ngagunakeun éta Kursor button to enable manual cursors for precise voltage and time measurements.

Katerangan Gambar: The Tektronix TBS1032B oscilloscope displaying two sine waves on its screen, illustrating its waveform visualization capability. The front panel controls are visible around the display.

5. Pangropéa

Pangropéa anu leres mastikeun umur panjang sareng akurasi osiloskop anjeun.

• beberesih: Ngagunakeun lemes, damp cloth to clean the exterior of the oscilloscope. Avoid abrasive cleaners or solvents. For the display, use a specialized screen cleaner.
• Panyimpenan: When not in use, store the oscilloscope in a clean, dry environment, away from direct sunlight and extreme temperatures.
• Kalibrasi: Periodic calibration by qualified personnel is recommended to maintain measurement accuracy. Refer to the official Tektronix support resources for calibration services.
• Apdet parangkat lunak: Check the Tektronix websitus périodik pikeun apdet firmware pikeun mastikeun kinerja optimal sarta aksés ka fitur anyar.

Katerangan Gambar: A pungkur view of the Tektronix TBS1032B oscilloscope, highlighting the power input, USB ports, and various certification and warning labels. This view is important for understanding connectivity and safety information.

6. Cara ngungkulan

Bagian ieu nyayogikeun solusi pikeun masalah umum anu anjeun tiasa patepang.

7. Spésifikasi

Key technical specifications for the Tektronix TBS1032B Digital Storage Oscilloscope:

8. Garansi jeung Rojongan

The Tektronix TBS1032B Digital Storage Oscilloscope comes with a garansi 5 taun, mastikeun reliabilitas jangka panjang sareng katengtreman pikiran. Garansi ieu nutupan cacad dina bahan sareng padamelan dina panggunaan normal.

For detailed warranty information, technical support, or service requests, please refer to the official Tektronix website or the comprehensive user manual provided on the included CD. You can also find the user guide in PDF format online: Tektronix TBS1000B Series User Guide (PDF).

For additional resources and product information, visit the official Tektronix Store on Amazon: Tektronix Store.