FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb User Manual

1. Bubuka

Thank you for choosing the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulb. Please read these instructions carefully before use and retain them for future reference.

This MR16 LED bulb is designed for various lighting applications, offering energy efficiency and a long lifespan. It features instant full brightness and is suitable for damp lokasi.

Image: The FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb, showcasing its compact design and GU10 base.

2. Émbaran Kasalametan

Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or personal injury.

• PERHATOSAN: Résiko kesetrum. Ulah dibuka. Henteu ngandung bagian anu tiasa diservis ku pangguna.
• Pareuman kakuatan saencan pamariksaan, pamasangan, atanapi cabut.
• Ulah dianggo di tempat anu langsung kakeunaan cai. Cocog pikeun damp lokasi.
• Alat ieu henteu ditujukeun pikeun dianggo ku jalan darurat atanapi lampu darurat.
• Do not use with standard dimmers unless specifically stated as dimmable. This bulb is dimmable. Ensure your dimmer is compatible with LED technology.
• Ulah masang bohlam ku leungeun baseuh atawa lamun nangtung dina baseuh atawa damp surfaces.
• Ensure the bulb is securely fastened in the fixture.

3. Setup jeung Instalasi

This LED bulb is designed for easy installation into compatible GU10 base fixtures.

1. Pareuman Daya: Before attempting any installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
2. Leupaskeun bohlam heubeul: Allow the old bulb to cool completely before carefully removing it from the fixture. For GU10 bulbs, typically push up and twist counter-clockwise to unlock and remove.
3. Pasang Bulb Anyar: Align the two pins of the FEIT Electric BPMR16/GU10/930CA LED bulb with the holes in the GU10 socket. Push the bulb firmly into the socket and twist clockwise until it locks into place.
4. Mulangkeun Daya: Sakali bohlam geus aman dipasang, balikkeun kakuatan ka fixture di circuit breaker.
5. Tes: Hurungkeun saklar lampu pikeun mastikeun bohlamna jalan kalawan bener.

If the bulb does not light up, ensure it is properly seated in the socket and that power is restored to the fixture.

4. Parentah Operasi

The FEIT Electric BPMR16/GU10/930CA LED Bulb operates like a standard light bulb once installed.

• Hurungkeun/Pareuman: Use the existing light switch connected to your fixture to turn the bulb on or off. The bulb will instantly turn on to full brightness.
• Dimming: This bulb is dimmable. If your fixture is connected to a compatible LED dimmer switch, you can adjust the light output. Ensure your dimmer is specifically designed for LED bulbs to avoid flickering or performance issues.
• Lingkungan Pamakéan: This bulb is suitable for both indoor and outdoor use, including damp locations. Avoid direct exposure to water.

5. Pangropéa

The FEIT Electric BPMR16/GU10/930CA LED Bulb requires minimal maintenance.

• beberesih: Before cleaning, ensure the power to the fixture is turned off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• ngagantian: With an average life of 25,000 hours, this LED bulb is designed for long-term use. When replacement is eventually needed, follow the installation steps in Section 3.

6. Cara ngungkulan

If you encounter issues with your FEIT Electric LED bulb, refer to the following troubleshooting steps:

• Bohlam teu hurung:
  • Pastikeun saklar daya hurung.
  • Pariksa circuit breaker atawa sekering.
  • Verify the bulb is securely seated in the GU10 socket. Turn off power, remove, and re-insert the bulb.
  • Tés bohlam dina perlengkapan séjén anu tiasa dianggo pikeun nyingkahan masalah dina perlengkapan éta.
• Masalah Kedip-kedip atanapi Dimming:
  • Ensure your dimmer switch is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
  • Check for loose connections in the fixture or switch.
• Bulb Emits Buzzing Noise:
  • This can sometimes occur with incompatible dimmer switches. Try using the bulb without a dimmer or with a different LED-compatible dimmer.

Upami masalah masih aya saatos nuturkeun léngkah-léngkah ieu, hubungi dukungan palanggan.

7. Spésifikasi

Detailed technical specifications for the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb:

8. Garansi jeung Rojongan

Garansi: The manufacturer states "No warranty." for this product. Please refer to your retailer's return policy for any initial defects.

Rojongan Palanggan: For further assistance or inquiries, please contact Feit Electric customer service through their official websitus atanapi pangecér dimana produkna dibeuli.