1. Produk Langkungview
Fieldpiece OIL32 is a high-quality vacuum pump oil designed for use with vacuum pumps in HVACR applications. This 1-quart (32 oz) container provides the necessary lubricant to ensure efficient and reliable operation of your vacuum pump. Manufactured in the United States, this oil is formulated to deliver consistent accuracy and performance, contributing to the longevity and effectiveness of your equipment.
fitur konci ngawengku:
- Dihasilkeun di Amérika Serikat.
- Formulated for consistent accuracy and performance.
- Suitable for heavy-duty shop products.
- Functions as a multitool accessory for vacuum pump maintenance.
Image 1.1: Fieldpiece OIL32 Vacuum Pump Oil, 1 quart (32 oz) bottle.
2. Setup jeung Persiapan
Before adding or changing vacuum pump oil, ensure your vacuum pump is turned off and disconnected from any power source. Allow the pump to cool down if it has been recently in operation. Prepare a clean, stable work area and have appropriate tools and containers for used oil disposal ready.
Pancegahan Kasalametan:
- Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling vacuum pump oil.
- Avoid skin and eye contact. In case of contact, rinse thoroughly with water and seek medical attention if irritation persists.
- Do not ingest. If swallowed, do not induce vomiting; seek immediate medical attention.
- Jauhkeun tina jangkauan barudak sareng piaraan.
- Pastikeun ventilasi nyukupan di wewengkon gawé.
3. Parentah Operasi
Adding Oil to a Vacuum Pump:
- Locate the oil fill port on your vacuum pump. This is typically marked or indicated in your pump's specific user manual.
- Leupaskeun tutup eusian minyak.
- Carefully pour the Fieldpiece OIL32 into the fill port, using a funnel if necessary, to prevent spills.
- Monitor the oil level through the sight glass (if available) or according to your pump's instructions. Fill to the recommended level, typically between the 'MIN' and 'MAX' marks. Do not overfill.
- Ganti tutup eusian oli sacara aman.
Pariksa tingkat minyak:
Regularly check the oil level in your vacuum pump. The oil level should be visible in the sight glass and maintained within the manufacturer's recommended range. Low oil levels can lead to pump damage, while excessively high levels can cause oil to be expelled during operation.
Gambar 3.1: Example of a Fieldpiece vacuum pump, showing where oil is typically added and checked.
4. Pangropéa
Oil Change Frequency:
The frequency of oil changes depends on the usage and operating conditions of your vacuum pump. As a general guideline, change the oil:
- After every use when evacuating systems with high moisture content.
- When the oil appears cloudy, milky, or discolored.
- At least every 10-20 hours of operation under normal conditions.
- Refer to your specific vacuum pump's manual for precise recommendations.
Changing Vacuum Pump Oil:
- Ensure the pump is off and cool.
- Teundeun wadahna cocog handapeun colokan solokan minyak.
- Cabut sumbat solokan oli teras antepkeun sadaya oli anu lami ngocor sagemblengna.
- Pasang deui sumbat solokan oli kalayan pageuh.
- Follow the 'Adding Oil' instructions in Section 3 to refill with fresh Fieldpiece OIL32.
Proper Disposal of Used Oil:
Used vacuum pump oil must be disposed of responsibly and in accordance with local environmental regulations. Do not pour used oil down drains or dispose of it in regular trash. Contact your local waste management facility or an authorized oil recycling center for proper disposal methods.
Panyimpenan:
Store Fieldpiece OIL32 in its original container, tightly sealed, in a cool, dry place away from direct sunlight and extreme temperatures. Keep away from ignition sources.
5. Cara ngungkulan
This section addresses common issues related to vacuum pump oil. For pump-specific troubleshooting, consult your vacuum pump's user manual.
| Gejala | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Oil appears cloudy or milky | Moisture contamination | Change the oil immediately. Ensure system being evacuated is as dry as possible. |
| Oil is dark or discolored | Contamination or degradation from heat/usage | Change the oil. Increase oil change frequency if discoloration occurs rapidly. |
| Vacuum pump not pulling deep vacuum | Contaminated or insufficient oil level | Check oil level and condition. Change oil if contaminated or low. Ensure no leaks in the system or pump. |
| Oli ngebul tina knalpot | Overfilled oil, incorrect oil type, or worn pump components | Check oil level and drain if overfilled. Ensure correct oil type (Fieldpiece OIL32) is used. If problem persists, consult pump manufacturer. |
6. Spésifikasi
- Pabrikan: Bahan médan
- Nomer Bagian: MINYAK32
- Beurat barang: 2 pon
- Ukuran produk: 5 x 3 x 9 inci
- Jumlah modél: MINYAK32
- warna: Orange (packaging)
- Sumber Daya: OIL QUART (refers to product type)
- Item Jumlah Paket: 1
- Komponén Kaasup: Multitool Accessory (refers to its use in maintenance)
- ASIN: B07DNJW9JV
- Titimangsa munggaran sadia: 11 Juni 2018
7. Émbaran jaminan
As a consumable product, Fieldpiece OIL32 Vacuum Pump Oil typically does not carry a specific warranty beyond being free from manufacturing defects upon purchase. For information regarding warranties on Fieldpiece vacuum pumps or other tools, please refer to the documentation provided with those specific products or visit the official Fieldpiece websitus.
8. Émbaran Rojongan
For further assistance, technical support, or product inquiries regarding Fieldpiece products, please visit the official Fieldpiece websitus atanapi ngahubungan departemén layanan palanggan maranéhna.
- Fieldpiece Official Store: Visit the Fieldpiece Store on Amazon
- Pananyaan Umum: Refer to the contact information available on the official Fieldpiece websitus.
No official product videos specifically for Fieldpiece OIL32 were found in the provided data.