AVANTEK CB-12 Mini Wireless Doorbell Instruction Manual

Bubuka

Welcome to the AVANTEK CB-12 Mini Wireless Doorbell. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your device. Please read this manual thoroughly before use.

Eusi pakét

• 1 x Transmitter (Push Button)
• 2 x Panarima Colokkeun
• 1 x pita napel
• 2 x sekrup
• 2 x Jangkar
• 1 x Obeng
• 1 x Manual Pamaké (Dokumén ieu)
• 1 x Batré CR2 (tos dipasang dina pemancar)

Produk Leuwihview

The AVANTEK CB-12 system consists of a waterproof push-button transmitter and two plug-in receivers. Each component features an LED indicator for visual alerts.

Image: The AVANTEK CB-12 wireless doorbell system, showing two black plug-in receivers and one black push-button transmitter. All units have a green LED indicator and a bell icon.

Transmitter (Push Button) Features:

• IP55 Dustproof and Waterproof rating.
• Operating temperature: -4 °F to 140 °F (-20 °C to 60 °C).
• Ultra-low power consumption with a 3-year maximum battery lifespan.

Fitur panarima:

• Desain plug-in.
• 52 mélodi dipilih.
• 5 adjustable volume levels (up to 115 dB).
• LED flash indicator.
• Memory function for last melody and volume setting.

Setup sareng Instalasi

1. Pamasangan pamancar:

Choose a suitable location for the transmitter, such as near your front door. Ensure the surface is clean and dry.

Image: A diagram illustrating two methods for installing the doorbell transmitter: using double-sided adhesive tape or using screws and anchors. The adhesive method shows applying the tape to the back of the transmitter and pressing it onto a surface. The screw method shows opening the transmitter, marking drill points, drilling, inserting anchors, and screwing the back plate to the wall before reattaching the front.

1. Method A: Using Adhesive Tape
   • Ngabersihan wewengkon instalasi tuntas.
   • Peel off one side of the adhesive tape and attach it to the back of the transmitter.
   • Peel off the other side of the tape and firmly press the transmitter onto the desired surface for at least 30 seconds.
2. Method B: Using Screws and Anchors
   • Buka pemancar casing using the provided screwdriver.
   • Mark the positions for drilling holes on the wall using the back plate as a template.
   • Bor dua liang terus selapkeun jangkar.
   • Secure the back plate to the wall with the screws.
   • Reattach the front part of the transmitter to the secured back plate.

2. Pamasangan panarima:

Plug the receivers into standard electrical outlets in locations where you want to hear the doorbell chime. The 1000 ft (300 m) wireless range allows for flexible placement throughout your home.

Image: An illustration depicting a house with a doorbell transmitter outside and a receiver plugged into an indoor wall outlet, demonstrating the 1000 ft (300 m) wireless range of the system.

Parentah Operasi

1. Pairing the Transmitter and Receiver:

The transmitter and receivers are pre-paired at the factory. If re-pairing is needed or if you add new components:

1. Colokkeun panarima ka colokan listrik.
2. Pencét terus tahan tombol volume dina panarima salami 5 detik dugi ka indikator LED kedip-kedip gancang. Ieu nunjukkeun modeu pairing.
3. Immediately press the transmitter (push button). The receiver will chime and the LED will flash slowly, indicating successful pairing.
4. If pairing multiple transmitters, repeat the process for each one.

2. Changing Melodies:

The receiver offers 52 different melodies.

Image: A close-up of the AVANTEK doorbell receiver plugged into a wall outlet, with icons indicating 52 chimes and tunes, 5 volume levels, and an LED indicator. This image visually represents the customization options for the chime.

• Pencét tombol "Salajengna" atanapi "Sateuacanna" di sisi panarima pikeun ningali melodi anu sayogi.
• Once you hear a melody you like, stop pressing the buttons. The receiver will remember this selection.

3. Nyaluyukeun Volume:

There are 5 adjustable volume levels, from silent (0 dB) to a maximum of 115 dB.

Image: A visual representation of the doorbell receiver's mute mode, showing a sleeping baby next to the receiver, emphasizing silent operation.

• Pencét tombol "Volume" di sisi panarima pikeun muterkeun 5 tingkat volume.
• The lowest setting is mute (0 dB), indicated by a mute icon.

4. Memory Function:

The receiver retains your last selected melody and volume level even after a power outage, eliminating the need for re-configuration.

Pangropéa

1. Battery Replacement (Transmitter):

The transmitter uses a CR2 battery with an estimated lifespan of 3 years. When the LED indicator on the transmitter no longer lights up or the range decreases significantly, it's time to replace the battery.

• Buka pemancar casing using the provided screwdriver.
• Cabut batré CR2 anu lami kalayan ati-ati.
• Selapkeun batré CR2 anyar, mastikeun polaritasna bener.
• Tutup casing aman.

2. beberesih:

Ngusap unit bel panto ku lawon lemes, garing. Ulah make cleaners abrasive atawa pangleyur.

Pamérésan masalah

spésifikasi

• model: LD-CB-12-A
• Jangkauan nirkabel: Up to 1000 ft (300 m) in open air
• Melodi: 52 lonceng anu tiasa dipilih
• Tingkat volume: 5 (0 dB nepi ka 115 dB)
• Batré pamancar: 1 x CR2 (included), 3-year lifespan
• Pamancar rating waterproof: IP55
• Suhu operasi: -4 °F nepi ka 140 °F (-20 °C nepi ka 60 °C)
• Sumber Daya: AC & Batré
• Bahan: ABS
• Diménsi (Transmitter): 2.8 x 0.6 x 3.1 inci
• Ukuran (Receiver): 2.87 x 0.6 x 3.15 inches (approximate, based on visual data)
• Voltage: 3 Volts (Transmitter)

Garansi sareng Rojongan

AVANTEK provides customer service for its products. For support or warranty inquiries, please refer to the contact information provided with your purchase or visit the official AVANTEK websitus.

This product is approved by FCC, CE, and RoHS standards.