Buku Panduan Panganggo Pangontrol Suhu DIGITEN DTC102

Produk Leuwihview

The DIGITEN DTC102 Temperature Controller is a versatile 2-stage plug-in thermostat designed for precise temperature regulation in various environments. It features both heating and cooling modes, making it suitable for applications such as homebrewing, fermentation, greenhouses, reptile habitats, and more. The device includes a sensor probe for accurate temperature tracking and an illuminated LED display for easy readability.

Key features include a wide control range of -40~248°F, plug-and-play operation with intuitive button controls, and safety features like high and low-temperature alarms. Its dual-socket output allows for independent control of heating and cooling devices, with customizable differential functions to protect connected equipment.

Parentah Setup

Follow these steps to set up your DIGITEN DTC102 Temperature Controller:

1. Ngabongkar bungkusan: Carefully remove the temperature controller and its accessories from the packaging. Ensure all components are present: the main controller unit, the temperature sensor probe, and the power cord with dual outlets.
2. Sambungan sénsor: Insert the temperature sensor probe into the designated port on the main controller unit. Ensure it is securely connected.
3. panempatan: Position the temperature controller in a suitable location. The unit features a "Hoke Design" eyelet tab at the top, allowing it to be hung for convenient installation and to keep cords tidy. Place the sensor probe in the area where temperature monitoring is required.
4. Alat Nyambungkeun:
   • Identify the "HEATING" and "COOLING" outlets on the power strip.
   • Plug your heating device (e.g., space heater, heating pad) into the "HEATING" outlet.
   • Plug your cooling device (e.g., fan, chiller) into the "COOLING" outlet.
5. Sambungan Daya: Plug the main power cord of the temperature controller into a standard electrical outlet (110V or 220V, depending on your model and region). The LED display will illuminate.

Figure 1: The DIGITEN DTC102 Temperature Controller showing the main unit, sensor probe, and the heating/cooling outlets.

Figure 2: Close-up of the "COOLING" outlet, designed for connecting cooling appliances.

Figure 3: Close-up of the "HEATING" outlet, designed for connecting heating appliances.

Parentah Operasi

The DTC102 features a user-friendly interface with three buttons: SET, Up (▲), and Down (▼).

Setting Temperature (SV - Set Value)

1. Pencét éta SET button once. The "SV" (Set Value) temperature will start flashing.
2. Ngagunakeun éta Ka luhur (▲) or Turun (▼) tombol pikeun nyaluyukeun suhu nu dipikahoyong.
3. Pencét éta SET button again to confirm and save the setting, or wait a few seconds for it to save automatically.

Switching Between Fahrenheit (°F) and Celsius (°C)

Pikeun ngarobah unit suhu:

• With the device powered on, press and hold the SET button for approximately 3 seconds until the display changes.
• Ngagunakeun éta Ka luhur (▲) or Turun (▼) buttons to select between °F or °C.
• Pencét éta SET tombol deui pikeun mastikeun pilihan Anjeun.

Setting Heating/Cooling Differential (HSP/CSP) and Compressor Delay

The controller allows for separate differential settings for heating (HSP) and cooling (CSP) to prevent rapid cycling of connected devices. It also supports compressor delay for refrigeration equipment protection.

1. Pencét jeung tahan tombol SET button for approximately 3-5 seconds to enter the advanced settings menu.
2. Ngagunakeun éta SET button to cycle through the parameters (e.g., HSP, CSP, compressor delay).
3. Ngagunakeun éta Ka luhur (▲) or Turun (▼) buttons to adjust the values for each parameter.
4. Once all desired settings are adjusted, wait for the display to return to the main screen, or press SET repeatedly until it exits the menu.

Fungsi Alarm

The DTC102 supports high and low-temperature alarms to notify you if the temperature exceeds or falls below your set range. Refer to the detailed instructions in the full user manual (PDF link provided in product documents) for specific alarm threshold settings.

Figure 4: The illuminated LED display showing current temperature (PV) and set value (SV).

Pangropéa

Proper maintenance ensures the longevity and accuracy of your temperature controller.

• beberesih: Disconnect the unit from power before cleaning. Wipe the exterior of the controller with a soft, damp lawon. Ulah make cleaners abrasive atawa neuleumkeun unit dina cai.
• Perawatan sénsor: Keep the temperature sensor probe clean and free from debris. Avoid bending or damaging the probe cable. If used in liquids, ensure the probe is designed for such environments and clean it regularly to prevent buildup that could affect accuracy.
• Panyimpenan: Upami henteu dianggo kanggo waktos anu lami, simpen controller di tempat anu tiis sareng garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.

Pamérésan masalah

If you encounter issues with your DIGITEN DTC102 Temperature Controller, refer to the following common troubleshooting steps:

spésifikasi

Garansi sareng Rojongan

For detailed warranty information and customer support, please refer to the official DIGITEN websitus atanapi dokuméntasi anu kalebet sareng produk anjeun. Anjeun oge bisa nganjang ka DIGITEN Store on Amazon kanggo sumber daya tambahan sareng pilihan kontak.

A manual pamaké dina format PDF sadia pikeun diundeur: DIGITEN DTC102 User Manual (PDF).